Table of Contents
Advertisement
Installing the Display Mask
To install the display mask, follow the steps below and refer to figure 4-26.
Set the display mask in place and secure the latches beginning with the one latch
1.
at the smaller display support and three latches at the larger display support.
Continue along the bottom of the display ( three latches ), on each side ( four
2.
latches), and across the top ( six latches ).
Secure the display mask with two M2.5x6 screws .
3.
Attach two rubber seals to cover the screws.
4.
5.
Install the optional PC card, optional memory card, and battery pack as described
in sections 4.4, 4.3, and 4.2.
4-30
100CS
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
