Advertisement
Quick Links
32in Recycler Kit
for Fixed Deck Mid–Size Mowers
Model No. 30118
Loose Parts
Note: Use the chart below to identify parts for assembly.
DESCRIPTION
Baffle
Bolt, 5/16 x 5/8 inch
Flange nut, 5/16 inch
Blocker plate
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Bolt, 1/4 x 3/4 inch
Flange nut, 1/4 inch
Cover plate
Bolt, 3/8 x 3/4 inch
Flange nut, 3/8 inch
Kicker
Bolt, 5/16 x 5/8 inch
Flange nut, 5/16 inch
Recycler blade
Preparing the Mower
1. Remove belt cover from top of mower.
2. Thoroughly clean underside of the mower. All debris
must be removed to ensure that baffles and kickers will
fit properly against the cutting chamber.
3. Tilt the mower up and support with jack stands to ease
installation of kit.
4. Flip up discharge chute and remove the discharge baffle
near discharge opening (Fig. 1).
2004 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
QTY.
1
1
Install the Recycler baffle
6
1
1
Install the blocker plate
1
2
2
1
4
Install the cover plate
4
2
4
Install the kickers
4
2
Replace standard blades on mower
Note: Replace hardware in top of mower when baffle is
removed for safety and to save for use when using mower
to side discharge.
Form No. 3350-108
Installation Instructions
USE
Contact us at www.Toro.com
All Rights Reserved
Printed in the USA
Advertisement
Related Manuals for Toro 32in Recycler 30118
Summary of Contents for Toro 32in Recycler 30118
- Page 1 3. Tilt the mower up and support with jack stands to ease installation of kit. 4. Flip up discharge chute and remove the discharge baffle near discharge opening (Fig. 1). 2004 by The Toro Company Contact us at www.Toro.com 8111 Lyndale Avenue South All Rights Reserved...
- Page 2 Warning Open holes in the mower exposes you and others to thrown debris. Debris thrown out of holes in the mower can cause injury. Never operate mower without hardware mounted in all holes in mower. Install hardware in mounting holes when mulching baffle is removed.
- Page 3 Installing the Kickers 1. Measure from the spindle center lines, and locate kickers as shown (Fig. 5). Position one kicker 7/16 inch (11 mm) off to the right of the right spindle and one kicker 1-7/8 inch (48 mm) off to the left of the left spindle (Fig.
- Page 4 Installing the Recycler Blades Removing Baffles for Side Discharge Cutting Warning 1. Thoroughly clean the mower. 2. Tilt the mower up and support with jack stands to ease A blade is sharp. Contact with sharp blade can removal of kit. cause serious personal injury.