Advertisement
Quick Links
Motor Mount Kit
Greensmaster
Model No. 145-0057
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
1
Preparing the Machine
No Parts Required
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3300 or 3320 TriFlex
Description
No parts required
No parts required
Motor adapter
Motor mount
Hex-head bolt (5/16 inch)
Nut (5/16 inch)
Hex-head bolt (3/8 inch)
Nut (3/8 inch)
Hex-head bolt (1/4 inch)
Nut (1/4 inch)
Cylinder spacer
Spacer
Motor adapter
Motor mount
Hex-head bolt (5/16 inch)
Nut (5/16 inch)
Hex-head bolt (3/8 inch)
Nut (3/8 inch)
Hex-head bolt (1/4 inch)
Nut (1/4 inch)
Cylinder spacer
Spacer
Register at www.Toro.com.
®
Traction Unit
Qty.
–
Prepare the machine.
–
Remove an existing motor mount.
1
1
2
2
1
Install a motor mount.
1
4
4
1
1
1
1
2
2
1
Remove and install the remaining motor
mount.
1
4
4
1
1
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3447-604 Rev A
Installation Instructions
Use
*3447-604*
Advertisement
Related Manuals for Toro 145-0057
Summary of Contents for Toro 145-0057
- Page 1 Form No. 3447-604 Rev A Motor Mount Kit Greensmaster ® 3300 or 3320 TriFlex ® Traction Unit Model No. 145-0057 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty.
- Page 2 Removing an Existing Motor Mount No Parts Required Procedure g361994 Figure 2 Important: Remove and install a single motor mount at a time (e.g., remove and install the left 1. Bolt 4. Flat spacer motor mount, then remove and install the right 2.
- Page 3 Installing a Motor Mount Parts needed for this procedure: Motor adapter Motor mount g360968 Figure 5 Hex-head bolt (5/16 inch) 1. Hex-head bolt (5/16 inch) 3. Nut (5/16 inch) Nut (5/16 inch) 2. Motor mount Hex-head bolt (3/8 inch) Nut (3/8 inch) Use 1 hex-head bolt (3/8 inch), 1 cylinder Hex-head bolt (1/4 inch) spacers, 1 spacer, and 1 nut (3/8 inch) to secure...
- Page 4 Removing and Installing the Remaining Motor Mount Parts needed for this procedure: Motor adapter Motor mount Hex-head bolt (5/16 inch) Nut (5/16 inch) Hex-head bolt (3/8 inch) Nut (3/8 inch) Hex-head bolt (1/4 inch) Nut (1/4 inch) Cylinder spacer Spacer Procedure Remove and install the remaining motor mount;...