Table of Contents
Advertisement
AA
Drainpipe and drain hose installation
Testing the drainage
You should test the drainage after completing the installation.
Prepare a little water about 2.0 liters.
1 Turn the cover drain pump, then pull it out.
2 Pour water into the indoor unit as shown in figure.
spill from the indoor unit.
3 Confirm that the water flows out through the drain hose.
mode.
4 Reassemble the cover drain pump.
Installing DPM
▶
▶ If DPM model is not set, communication error may occur.
▶
stop if the remote control reception signal of the installed indoor unit is different.
Installing MULTI
If using a multi system, refer to the manual supplied with the outdoor unit.
12
Concentrated drain pipe
check part
Hose
Hide quick links:
Advertisement
Table of Contents
