Disabling Or Enabling The Touchpad; Using External Display Devices; Directing The Display Output When You Turn On The Computer - Toshiba R10 S4401 - Tecra - Core 2 Duo 2.26 GHz User Manual
Toshiba user's guide for tecra r10
Hide thumbs
Also See for R10 S4401 - Tecra - Core 2 Duo 2.26 GHz:
- Specifications (5 pages) ,
- User manual (222 pages)
Table of Contents
Advertisement
Disabling or enabling the TouchPad
The TouchPad
TouchPad setting, press
TouchPad. For more information, see
TouchPad™" on page
Using external display devices
Your computer comes with a built-in display, but you can also connect an
external display device to an available video port.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1
Read the directions that came with the monitor to see if you
first need to install new software.
2
Connect the monitor's video cable to the RGB (monitor) port
on the side of the computer.
3
Connect the device's power cable to a live electrical outlet.
4
Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
5
Select the settings you desire and click Apply.
6
Click OK.
NOTE
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1
Press
Using external display devices
™
is enabled by default. To change the enable/disable
216.
In the future you can change the display settings by pressing
or by configuring the display properties settings.
Some modes are only available with the appropriate device attached
and turned on.
Fn
+
F5
):
and
simultaneously.
Fn
F5
™
+
. This hot key enables/disables the
Fn
F9
"Disabling or enabling the
Getting Started
71
,
Fn+F5
Advertisement
Table of Contents
