Advertisement
Installing the square panel on the
indoor unit
1
Remove the four cover panels from the panel front.
NOTE
•
To remove the cover panels, use the two tongues at the
ends of each cover panel.
2
Push the four corners of the panel front toward the
indoor unit body one at a time until you hear "click" so
that they are assembled in place.
NOTE
•
After assembling the panel front in place, you can
slightly adjust its position left and right. If required,
adjust the position of the panel front so that it aligns
with the ceiling opening.
3
Connect the Wi-Fi wire to the PBA port inside the indoor
unit, through the power and communication cable outlet.
4
Push the centres of the four sides of the panel front
toward the indoor unit body one at a time until you hear
"click" so that they are hooked in place.
Power
Wi-Fi cable
cable
Communication
cable
English
3
Advertisement
