Page 1
Operating instructions Dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation sheet before it is installed and used for the first time. en-SA HG07 M.-Nr. 11 831 621...
Contents Warning and safety instructions ..............Notes on the operating instructions ..............16 Notes on the layout ..................... 16 Scope........................17 Guide to the appliance ..................18 Appliance overview ..................... 18 Control panel ....................... 19 Display functions ....................20 Caring for the environment ................21 Before using for the first time ................
Page 4
Contents Showroom ......................35 Factory default..................... 35 Caring for the environment ................36 Economical dishwashing..................36 EcoFeedback consumption indicator..............37 Loading the dishwasher..................38 General information ..................... 38 Upper basket....................... 40 Adjusting the upper basket ................. 43 Lower basket ....................... 44 Cutlery tray/cutlery basket (depending on model) ..................
Page 5
EPREL database ....................90 Guarantee......................90 Note for test institutes ..................91 Optional accessories ..................92 Installation......................94 The Miele Waterproof system................94 Water inlet ......................94 Regulation in Germany..................95 Water drainage ....................96 Electrical connection ................... 98 Technical data....................99...
Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 7
Warning and safety instructions Appropriate use This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments;...
Page 8
Warning and safety instructions Safety with children Children under 8 years of age must be kept away from the dishwasher unless they are constantly supervised. Children aged 8 and older may only use the dishwasher without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.
Page 9
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage.
Page 10
Warning and safety instructions There must be no electrical sockets behind the dishwasher because the building-in niche may be too small. Danger of overheating and fire risk if the dishwasher were to be pushed up against a plug. The dishwasher must not be installed underneath a hob.
Page 11
Warning and safety instructions Multi-socket adapters and extension leads do not guarantee the required safety of the appliance (fire hazard). Do not connect the dishwasher to the mains electricity supply using a multi-socket adapter or an extension lead. The dishwasher must not be used in a non-stationary location (e.g.
Page 12
Miele authorised technician. Otherwise the warranty is invalidated. We recommend replacing defective components with original spare parts. If original Miele spare parts are installed correctly, Miele ensures full compliance with safety requirements and the warranty remains valid. ...
Page 13
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact your Miele dealer. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 14
Warning and safety instructions Only use detergent and rinse aid formulated for domestic dishwashers. Do not use washing-up liquid. Do not use any commercial or industrial detergents. These may cause material damage, and there is a risk of a severe explosive chemical reaction (such as an explosive oxyhydrogen gas reaction).
Page 15
Warning and safety instructions Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and, if applicable, product liability claims will be invalidated. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the...
Notes on the operating instructions These operating instructions apply to Additional information and several different dishwasher models of comments different heights. Additional information and comments The different dishwasher models will be are highlighted in a box framed with a named as follows: single black line.
Scope The appliance is supplied with: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for installing the dishwasher (see installation sheet) - Funnel for filling the dishwasher salt - Additional printed matter and add- ons if required...
Guide to the appliance Appliance overview a Door locking pins g Bottom spray arm b Top spray arm h Filter combination c 3D MultiFlex cutlery tray (depending i Salt reservoir on model) j Data plate d Upper basket (depending on model) k Rinse aid reservoir e Middle spray arm l Detergent compartment...
Guide to the appliance Control panel Intense Express Timer Zone Auto 45°C 65°C 75°C a Optical in-operation indicator light g Express button For indicating an ongoing wash For reducing the programme programme when the door is closed. duration. b Display h IntenseZone button For further information, see “Guide to Increases cleaning performance in...
Guide to the appliance The OK button is used to confirm Display functions messages or settings and also to move The display is used to select or set the to the next menu or another menu level. following: Under Further programmes/settings, - The programme a scroll bar ...
Use household waste. material-specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away. Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice.
Before using for the first time Every dishwasher is tested at the Risk of scalding due to hot factory. There will be residual water in water. the appliance from this test. It is not During operation, water in the an indication that the dishwasher has dishwasher may be very hot.
Before using for the first time Setting the water hardness level Basic settings The display will change to the screen Switching on the dishwasher for setting the water hardness. Open the door. - You should programme the Switch the dishwasher on with the dishwasher to the correct water button.
Page 24
Before using for the first time Finally, prompts will appear in the display. After confirming these prompts with OK, the messages Refill salt may appear. Refill rinse aid Add salt and rinse aid if necessary (see “Before using for the first time – Dishwasher salt”...
Before using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning (5 °dH – German scale), you do not results, the dishwasher needs to need to add dishwasher salt.
Before using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 l of water to enable the salt to dissolve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir.
Before using for the first time Refilling the salt After the salt reservoir has been filled, the salt refill indicator may still appear in When Refill salt appears in the the display if the salt concentration has display, wait until the end of the not yet reached the correct level.
Before using for the first time Rinse aid If you only ever wish to use combination products in your Rinse aid is necessary to ensure that dishwasher, you do not need to add water does not cling and leave marks rinse aid.
Before using for the first time Close the lid firmly until you hear it Adding rinse aid click into place. Otherwise, water can enter the rinse aid reservoir during a programme. Wipe up any spilled rinse aid. This prevents excess foam developing during the next programme.
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements Use the buttons to select the by adjusting the settings. menu option you want to change and confirm your selection with OK. The settings can be altered at any time.
Settings Language Water hardness The display can be set to appear in one Your dishwasher is fitted with a water of several different languages. softener. You can change the language used in - You should programme the the display and also the country via the dishwasher to the correct water Language ...
Settings Rinse aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can set whether the energy and best results. water consumption is displayed for the The rinse aid dosage can be set from 0 selected programme. This function to 6 ml.
You can set the display brightness to If you only ever use combination one of seven different levels. detergent products or automatic dispensing using Miele PowerDisks (if Buzzer available), you can switch off the refill reminders for dishwasher salt and rinse A buzzer sequence will sound at the aid if you wish.
Settings Extra clean 2nd interim rinse You can choose this function to You can choose this function to increase the cleaning performance of increase the cleaning performance of the programmes. the programmes with a second interim rinse. If you activate this function, the programme running times and the main When this function is activated, water wash temperatures will increase.
Settings Software version You can call up the electronic software version of your dishwasher for technical support purposes. Showroom For demonstration purposes only. The dishwasher is equipped with a demo mode for showroom use. Factory default You can reset all dishwasher settings to the factory default settings.
Caring for the environment - You can connect the dishwasher to a Economical dishwashing hot water supply. A hot water This dishwasher is exceptionally connection is particularly suitable economical in its use of water and with energy-saving water heating electricity. sources, such as solar energy with a You can make the most of your circulation system.
Caring for the environment The estimated consumption function is EcoFeedback consumption activated as standard. This function can indicator be deactivated, if preferred (see The Consumption function is used for “Settings”, “Consumption” section). calling up information about the energy and water consumption of your 2.
Loading the dishwasher - The spray arms must not be blocked General information by items that are too tall or hang Remove coarse food residues from through the baskets. Test for free crockery. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 39
Loading the dishwasher Items not suitable for dishwashers: Damage due to caustic alkaline - Wooden cutlery and crockery or detergents. items with wooden parts: these may Aluminium parts (e.g. the grease discolour and fade. The glue used in filters of cooker hoods) can be these items is not dishwasher-proof damaged by caustic alkaline and wooden handles may come...
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls and flat See the “Loading the dishwasher” crockery on the FlexCare cup rack. chapter, “Loading examples” section Glasses can be arranged along the cup for examples of how to load crockery rack so they sit securely during the and cutlery.
Page 41
Loading the dishwasher Adjusting the FlexCare cup rack Loading the silicone elements of the FlexCare cup rack You can set the height and depth of the cup rack at two different levels. so that The silicone elements in the cup rack it can accommodate larger cups and so are specially designed to hold tall that taller crockery can be placed...
Page 42
Loading the dishwasher Lowering the spikes On both front right-hand rows of spikes, you can lower every other spike to make it easier to arrange larger crockery, like cereal bowls. Press the yellow lever downwards , and then lower the dark grey spikes .
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Lift the basket up until it clicks into In order to gain more space for taller place. pieces of crockery in the lower basket or upper basket, the upper basket can To lower the upper basket: be adjusted on 3 levels with 2 cm ...
Loading the dishwasher Loading the MultiComfort zone Lower basket The rear section of the lower basket is See the “Loading the dishwasher” used for washing cups, glasses, plates chapter, “Loading examples” section and pots and pans. for examples of how to load crockery and cutlery.
Page 45
Loading the dishwasher Lowering the spikes Loading the FlexCare glass holder The rows of spikes at the front are used The silicone elements in the glass for loading plates, soup bowls, platters, holder provide a stable and secure hold dessert bowls and saucers. for delicate stemware.
Loading the dishwasher You can push the left insert to the Cutlery tray/cutlery basket middle in order to accommodate tall (depending on model) items of crockery and long stemmed See the “Loading the dishwasher” glasses in the upper basket (see “Upper chapter, “Loading examples”...
Loading the dishwasher Loading the cutlery basket Fit the insert onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the left or right corner of the lower basket. ...
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using These detergents allow you to adjust unsuitable detergents. the amount dispensed according to Detergents that are not suitable for the size of the load and level of domestic dishwashers can cause soiling.
Detergent Detergent dispensing Risk of chemical burns from detergent. The detergent compartment holds a Dishwasher detergents can cause maximum of 50 ml. burning on the skin and in the eyes, There are marks in the detergent nose, mouth and throat. compartment to aid with dispensing: Avoid contact with detergents.
Detergent Adding detergent The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Switching on the dishwasher Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of crockery and the degree of Open the door. soiling. Make sure the spray arms can rotate The different programmes and their freely.
Operation Display of programme duration Starting the programme Start the programme by closing the The estimated duration of the selected programme appears on the display door. before the programme begins. If the If necessary, confirm the previously door is opened during the programme, displayed message with OK.
Operation End of programme Risk of damage due to steam. Steam from the dishwasher could At the end of a programme, the optical in-operation indicator light will flash damage the edges of delicate worktops when you open the door at slowly with the door shut.
Operation Switching off the dishwasher Unloading the dishwasher Open the door. Dishes tend to break and chip more easily when they are hot. Allow the The dishwasher can be switched off dishes to cool until they are comfortable at any time using the button.
Operation Interrupting a programme Cancelling or changing a programme A programme will be interrupted as soon as the door is opened. If a programme is cancelled, If the door is closed again, the important programme stages may be programme will continue from the point missed.
Options Activating the timer Timer Open the door. You can set the start time of a programme. The programme start time Switch the dishwasher on with the can be delayed for between 30 minutes button. and 24 hours. Select the programme you want to With start time delays between use.
Page 61
Options Starting a programme before the After you have activated the timer, all time for the timer has elapsed: the displays will switch off after a few minutes to save energy. A programme can be started before the time for the timer has elapsed. Press the ...
Guide for selecting a programme Crockery Food deposits Programme features Lightly dried-on Temperature-sensitive dishes, normal food Programme with glass care glasses and plastics deposits All normal Variable, food deposits sensor-controlled programme Lightly dried-on Short programme taking Mixed crockery normal food less than an hour deposits Standard dried-on normal...
Page 63
Guide for selecting a programme Programme Consumption estimate Energy consumption Water consumption Gentle 45 °C Programme duration Energy consumption Auto 45–65 °C Water consumption Programme duration Energy consumption Water consumption QuickPowerWash 65 °C Programme duration Energy consumption Water consumption ECO 50 °C Programme duration Energy consumption Water consumption Intensive 75 °C ...
Programme overview Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying/ AutoOpen °C °C / Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment according to load size and level of soiling / 45–65 55–70 required Intensive 75 °C...
Page 65
Programme overview Consumption Electrical energy Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C h:min h:min 3:41 0,74/0,73 0,52/0,51 3:58/3:58 2:05–3:35 1:57–3:21 0,75–1,05 0,45–0,55 6,0–13,0 1,35 0,85 14,0 3:11 3:03 1,20 0,75 10,5 0:58 0:58 0,90 0,40...
Programme overview Further programmes Maintenance programme The dishwasher wash cabinet is PowerWash 60 °C generally self-cleaning. However, if Programme for cleaning a mixed load residues or deposits occur, use the with normal household food residues. programme to clean it. The Maintenance dishwasher must not be loaded for this ExtraQuiet 55 °C programme.
Programme options Express Selecting programme options The Express programme option You can use programme options to reduces the programme duration. adjust the programmes. In order to achieve optimum cleaning To do this, you can select or deselect results, the temperature, and therefore the programme options before running the energy consumption, will increase the programme.
(see “Optional accessories – Appliance care”). Follow the instructions on the product packaging. Miele cleaning and care products are available to order from the Miele Customer Service Department or from the Miele online shop. Clean the filters in the wash cabinet...
Cleaning and care Hygiene cycle Cleaning the door and the door seal If you mainly use low temperature programmes, there is a risk of bacteria The door seal and the sides of the and unpleasant odours building up in dishwasher door cannot be reached the wash cabinet.
Cleaning and care To avoid damaging the external Cleaning the appliance front surfaces, do not use the following: Damage due to soiling. - Detergents containing soda, Soiling that is left too long might ammonia, acids or chlorides become impossible to remove and - Detergents containing descaling could cause the external surfaces to agents...
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray, you first have to remove the spray arm nozzles and bearings. The cutlery tray (if present).
Page 72
Cleaning and care Removing the top spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upwards to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 73
Cleaning and care Rotate the screw thread of the lower Inserting the upper spray arm spray arm clockwise until the arrow in Refit the upper spray arm and tighten the viewing window points to the lock it by hand. symbol .
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling “Cleaning and care” chapter, from the suds solution.
Page 75
Cleaning and care In order to clean the inside of the Rotate the screw connection filter, pull the microfilter on the plastic clockwise until the arrow in the ring downwards and away from the viewing window points to the lock filter combination.
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock from mains voltage.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These are easy to remove. ...
Page 78
Cleaning and care Damage due to incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
Reset the trip switch in the fuse box or replace the fuse in the plug (see data plate for minimum fuse rating). If the mains fuse trips again, contact your Miele dealer. The dishwasher is not switched on.
Close the door. If the fault message appears again, there is a technical fault. Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department. Waterproof The Waterproof system has reacted. Switch the dishwasher off.
If the same fault message appears again, call your Miele dealer. The door locking pins do not retract after the door is opened. There may be a technical fault.
(see “Installation – Water drainage”). A technical fault has occurred. Fault F18 Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department.
Problem solving guide Water drainage fault Issue Cause and remedy The optical in-operation Before rectifying the problem: indicator light is Switch the dishwasher off. flashing quickly. Water drainage fault. The alarm tone is There might be water in the wash cabinet. sounding.
Problem solving guide General problems with the dishwasher Issue Cause and remedy The indicator lights and The dishwasher has switched off automatically to the display are dark. save energy. Switch the dishwasher on again with the button. Detergent residue is left The detergent compartment was still damp when in the detergent detergent was added.
Problem solving guide Noises Issue Cause and remedy Knocking noise in the A spray arm is knocking against a wash item. wash cabinet Carefully open the door and rearrange the wash items that are obstructing the spray arm. Rattling noise in the Wash items are insecure in the wash cabinet.
Problem solving guide Unsatisfactory washing result Issue Cause and remedy The crockery is not The crockery was not loaded correctly. clean. See notes under “Loading the dishwasher” for examples on how to load crockery and cutlery. The programme was not powerful enough. ...
Page 87
Problem solving guide Issue Cause and remedy The crockery is not dry The rinse aid dosage is too low or the rinse aid or cutlery and glasses container is empty. are flecked. Replenish the rinse aid container, increase the dosage or change the brand of rinse aid (see “Before using for the first time –...
Page 88
Problem solving guide Issue Cause and remedy White residue is visible The rinse aid dosage is set too low. on the crockery. Increase the dispensing quantity (see “Settings – Clouding has occurred Rinse aid”). on glassware and There is no salt in the salt reservoir. cutlery.
Page 89
Problem solving guide Issue Cause and remedy There are rust stains on The affected items are not corrosion-resistant. cutlery. No remedy. Purchase cutlery that is dishwasher-safe. A programme was not run after dishwasher salt was added. Traces of salt have got into the normal wash cycle.
Service EPREL database Information to help you rectify faults yourself and about Miele spare parts From 1 March 2021, information on can be found at www.miele.com/ energy labelling and ecodesign service. requirements will be available in the European Product Database (EPREL).
Please order the latest version of this leaflet by email from: - testinfo@miele.de Please indicate your postal address, as well as the model and serial number of the dishwasher (see data plate). You can also download the brochure from the Miele website.
Not all - Extra coarse-grained off-the-shelf products deliver the same results in all dishwashers. For this reason Miele offers dishwasher products specifically designed for Miele appliances. Detergent tabs - Sparkling results even with stubborn...
Page 93
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your Miele dishwasher. Dishwasher cleaner - For use with the programme without Maintenance detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and associated unpleasant odours...
14,000 kPa/140 bar) is available as an operated. optional accessory from Miele specialist Connect the dishwasher to a drinking dealers or the Miele Customer Service water supply. Department. A stopcock with a ¾" threaded union is required for the connection. If a...
*INSTALLATION* Installation Risk of damage from leaking Risk of damage due to excessive water. pressure. The connection point is subject to A brief increase in the water pressure mains water pressure. Water leaking can damage components of the from it can cause damage.
*INSTALLATION* Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to The dishwasher’s drainage system is pressure or tension. fitted with a non-return valve, which prevents dirty water from flowing back ...
Page 97
*INSTALLATION* Installation Venting the water drain If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water.
Miele product must also be If the connection cable is faulty, it may maintained in isolated operation or in only be replaced by a qualified operation that is not synchronised with electrician in order to avoid a hazard.
Technical data Technical data Dishwasher model Normal Height 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Height of building-in niche Min. 80.5 cm (+6.5 cm) Min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Width of building-in niche 60 cm 60 cm Depth 55 cm 55 cm Weight Max. 47 kg Max.