Page 1
Operating instructions Dishwasher To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. en-AU, NZ HG07 M.-Nr.
Contents Warning and Safety instructions..............Notes on the operating instructions ..............16 Notes on the layout ..................... 16 Items supplied ....................17 Guide to the appliance ..................18 Appliance overview ..................... 18 Control panel ....................... 19 Display functions ....................20 Caring for the environment ................
Page 4
Contents Showroom ......................36 Factory default..................... 36 Caring for the environment ................37 Economical dishwashing..................37 EcoFeedback consumption display ..............38 Loading the dishwasher..................39 General information ..................... 39 Upper basket....................... 41 Adjusting the upper basket ................. 44 Lower basket ....................... 45 Cutlery tray/Cutlery basket (depending on model)..........
Page 5
Unsatisfactory cleaning result ................91 Service........................ 95 Contact in case of fault ..................95 Warranty ......................95 Optional accessories ..................96 Installation......................98 The Miele Waterproof system................98 Water intake ......................98 Drainage ......................100 Electrical connection ..................102 Technical data....................103...
"Installation" and in "Warning and Safety instructions". Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 7
Warning and Safety instructions Correct application This appliance is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts, and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed &...
Page 8
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the dishwasher if its operation has been clearly explained to them and they are able to use it safely. They must be able to understand and recognise the possible dangers of misuse.
Page 9
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorised technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage.
Page 10
Warning and Safety instructions Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency and voltage) match the electricity supply to prevent damage to the dishwasher. Compare these before connecting the appliance to the mains electricity. If in any doubt, consult a qualified electrician.
Page 11
Miele authorised service technician. Defective components must be replaced with original parts. If original Miele parts are installed correctly, Miele ensures full compliance with safety requirements and the warranty remains valid. During installation, maintenance, and repair work, the dishwasher must be disconnected from the electricity supply (switch it off and withdraw the plug from the socket).
Page 12
If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available Miele). For safety reasons, such replacement may only be carried out by a Miele authorised technician or by Miele in order to avoid a hazard. ...
Page 13
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact Miele customer service. The maximum weight of the front panel that can be aligned with the factory fitted door springs is 10–12 kg (depending on model).
Page 14
Please observe the information listed under Technical data regarding the capacity of the dishwasher. Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance, and, if applicable, product liability claims will be invalidated.
Page 15
Warning and Safety instructions Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your dishwasher. Transport Damage to the dishwasher can compromise your safety. Before using the dishwasher, check it for any visible transport damage.
Notes on the operating instructions These operating instructions apply to Additional information and several different dishwasher models of comments different heights. Additional information and comments The different dishwasher models will be are highlighted in a box framed with a named as follows: thin black line.
Items supplied The following items are supplied: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for installing the dishwasher (see installation sheet) - Funnel for filling the dishwasher salt - Additional printed matter and add- ons if required...
Guide to the appliance Appliance overview a Door locking pin g Lower spray arm b Upper spray arm (not visible) h Filter combination c 3D MultiFlex cutlery tray (depending i Salt reservoir on model) j Data plate d Upper basket k Rinse aid reservoir e Middle spray arm l Detergent compartment...
Guide to the appliance Control panel a Programme selection g OK button For selecting menu options and = ECO values displayed. Auto = Auto 45–65 °C For confirming messages. 45 °C = Gentle 45 °C h buttons 65 °C = QuickPowerWash 65 °C For programme selection. ...
Guide to the appliance The OK button is used to confirm Display functions messages or settings and also to move The display is used to select or set the to the next menu or another menu level. following: Under Further programmes/Settings, - further programmes a scroll bar ...
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
Using for the first time At the end of the programme, if the Every dishwasher is tested at the AutoOpen function is on, the door factory. There will be residual water in locking pins automatically retract. the machine from this test. It is not an indication that the dishwasher has To prevent a technical fault, do not been used previously.
Using for the first time Closing the door Activating the safety lock Push the baskets right in. Use the safety lock to prevent children opening the dishwasher door. The door Raise the door upwards until the can then only be opened by using a lot catch engages.
Using for the first time Setting the water hardness Standard settings The display will change to the screen Switching on the dishwasher for setting the water hardness. Switch the dishwasher on with the - The dishwasher needs to be button.
Page 25
Using for the first time Finally, prompts will appear in the display. After confirming these prompts with OK, the messages Refill salt may appear. Refill rinse aid Add salt and rinse aid if necessary (see “Using for the first time - Dishwasher salt”...
Using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning (5 °dH - German scale) you do not results, the dishwasher needs to need to add dishwasher salt.
Using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 2 litres of water to enable the salt to dissolve. Once the dishwasher has been used, there is always sufficient water in the salt reservoir.
Using for the first time Replenishing salt After the salt reservoir has been filled, the refill reminder may still appear in the When Refill salt appears in the display if the salt concentration has not display wait until the end of the yet reached the correct level.
Using for the first time Rinse aid If you only ever use combination detergent products in your Rinse aid is necessary to ensure water dishwasher, you do not need to fill does not cling to and leave marks on the rinse aid reservoir. crockery during the drying phase, and it However, the best rinsing and drying helps crockery dry faster after it has...
Using for the first time Wipe up any spilled rinse aid. This Adding rinse aid prevents over-foaming occurring during the next programme. You can adjust the rinse aid dosage for best results (see "Settings - Rinse aid"). Refilling rinse aid When the ...
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements Use the buttons to select the by adjusting the settings. menu option you want to change and confirm your selection with OK. Settings can be altered at any time. Submenu options that have already Opening the Settings menu been selected will have a tick ...
Settings Language Water hardness The display can be set to appear in one Your dishwasher is fitted with a water of several different languages. softener. You can change the language used in - The dishwasher needs to be the display and also the country via the programmed to the correct water Language ...
Settings Rinse Aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can set whether the energy and best results. water consumption is displayed for the The rinse aid dosage can be set from 0 selected programme. This function to 6 ml.
Risk of damage due to steam. dispensing using Miele PowerDisks (if available), you can switch off the refill Steam from the dishwasher could reminders for reactivation salt and rinse damage the edges of delicate aid if you wish.
Settings Extra clean 2nd interim rinse You can choose this function to You can choose this function to increase the cleaning performance of increase the cleaning performance of the programmes. the programmes with a second interim rinse. If you activate this function, the programme cycle times and the main When this function is activated, water wash temperatures will increase.
Settings Software version You can display the electronic software version of your dishwasher for technical support purposes. Showroom For demonstration purposes only. The dishwasher is equipped with a demo mode for showroom use. Factory default You can reset all dishwasher settings to the factory default settings.
Caring for the environment - You can connect the dishwasher to a Economical dishwashing hot water supply. A hot water This dishwasher is exceptionally connection is particularly suitable economical in its use of water and with energy-saving water heating electricity. sources, such as solar water heaters.
Caring for the environment The estimated consumption function is EcoFeedback consumption activated as standard. It can be display deactivated, if preferred (see “Settings - The "Consumption" function is used for Consumption (EcoFeedback)”). calling up information about the energy and water consumption of your 2.
Loading the dishwasher - The spray arms must not be blocked General information by items that are too tall or hang Remove coarse food residues from through the baskets. Test for free crockery. movement by manually rotating the spray arms. There is no need to pre-rinse items under running water.
Page 40
Loading the dishwasher Items not suitable for washing in the Damage due to caustic alkaline dishwasher: detergents. - Wooden cutlery and crockery or Aluminium parts (e.g. the grease items with wooden parts. These may filters of rangehoods) can be discolour and fade.
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls, and flat See “Loading the dishwasher - dishes on the FlexCare cup rack. Loading examples” for examples of Glasses can be arranged along the cup how to load crockery and cutlery.
Page 42
Loading the dishwasher Adjusting the FlexCare cup rack Loading the silicone elements of the FlexCare cup rack You can set the height and depth of the cup rack at two different levels so that it The silicone elements on the cup rack can accommodate larger cups and so are specially designed to hold tall that taller items can be placed...
Page 43
Loading the dishwasher Lowering the spikes You can fold down every second spike in the two front right hand rows of spikes to make it easier to arrange larger pieces of crockery, e.g. cereal bowls. Press the yellow lever downwards , and then lower the dark gray spikes .
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Pull the basket up until it clicks into In order to gain more space for taller place. items, the upper basket can be adjusted on three levels with 2 cm To lower the upper basket: between each level.
Loading the dishwasher Loading the MultiComfort area Lower basket The rear section of the lower basket is See “Loading the dishwasher - used for washing cups, glasses, plates, Loading examples” for examples of and saucepans. how to load crockery and cutlery. Loading the lower basket ...
Page 46
Loading the dishwasher Lowering the spikes Loading the FlexCare glass holder The rows of spikes at the front are used The silicone elements in the glass for loading plates, soup bowls, platters, holder provide a stable and secure hold dessert bowls and saucers. for delicate stemware.
Loading the dishwasher You can push the left insert to the Cutlery tray/Cutlery basket middle in order to accommodate tall (depending on model) items of crockery and long stemmed See “Loading the dishwasher - glasses in the upper basket (see “Upper Loading examples”...
Loading the dishwasher Loading the cutlery basket Fit the insert onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the left or right corner of the lower basket. ...
Comparison tests Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme (for energy label): Capacity: 14 place settings Detergent amount: 27.5 g Rinse aid dosage: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid" section of this booklet.
Page 55
Comparison tests Test standard: AS/NZS 2007.1:2005, AS/NZS 2007.2:2005; AS/NZS 6400:2005 Standard programme (for energy label): Capacity: 14 place settings Detergent amount: 27.5 g Rinse aid dosage: Setting 3 You can find information on adjusting the rinse aid dosage in the "Rinse aid" section of this booklet.
Detergents There are different types of detergents: Types of detergents - Powder and liquid gel detergents. Damage due to unsuitable These detergents allow you to adjust detergents. the amount dispensed according to Detergents that are not suitable for the size of the load and the level of domestic dishwashers can cause soiling.
Detergents Detergent dispensing Risk of chemical burns from detergent. The detergent compartment holds a Dishwasher detergents can cause maximum of 50 ml. burning on the skin and in the eyes, There are marks in the detergent nose, mouth, and throat. compartment to aid with dispensing: Avoid contact with detergents.
Detergents Adding detergent The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Switching on the dishwasher Selecting a programme Make sure the spray arms can rotate Choose your programme according to freely. the type of crockery and the degree of soiling. Close the door. The different programmes and their use ...
Operation Display of programme duration Starting a programme Press the Start button. The estimated duration of the selected programme appears in the display If necessary, confirm the previously before the programme begins. During displayed message with OK. the programme, the time left until the The programme will start.
Operation At the end of the programme Energy management The programme has finished when the To save energy, the dishwasher will display shows the message Finished switch off automatically 10 minutes after the last time a button is pressed or In some programmes, if the AutoOpen after the end of a programme.
Operation Switching off the dishwasher Unloading the dishwasher The dishwasher can be switched off Dishes tend to break and chip more at any time using the button. easily when they are hot. Allow the dishes to cool until they are comfortable ...
Operation Interrupting a programme Cancelling or changing a programme A programme will be interrupted as soon as the door is opened. If a programme is cancelled, If the door is closed again, the important programme stages may be programme will continue from the point missed.
Options Timer Activating the timer Switch the dishwasher on with the You can set the start time of a button. programme. The programme start time can be delayed for between 30 minutes The Start indicator light will flash. and 24 hours. ...
Page 67
Options Starting a programme before the After you have activated the timer, the time for the timer has elapsed: display and the indicator lights will switch off after a few minutes to save A programme can be started before the energy.
Guide for selecting a programme Crockery Food deposits Programme features Temperature-sensitive dishes, Lightly dried-on food deposits Programme with glass care glasses and plastics All fresh to dried-on food Variable, deposits sensor-controlled programme Short programme taking Mixed crockery Lightly dried-on food deposits less than an hour Standard dried-on normal Water and...
Page 69
Guide for selecting a programme Programme Consumption estimate Energy consumption 20 ml Water consumption Gentle 45 °C Programme duration Energy consumption Auto 45–65 °C 30 ml Water consumption Programme duration Energy consumption 30 ml Water consumption QuickPowerWash 65 °C Programme duration Energy consumption 30 ml Water consumption...
Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Auto 45–65 °C Variable programme sequence, sensor-controlled adjustment to load size and level of soiling 45–65 55–70 required required Intensive 75 °C ...
Page 71
Programme chart Consumption Electricity Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C h:min h:min 0.34 0.50 / 0.51 3:48 / 3:48 3:49 / 3:47 2:05–3:35 1:57–3:21 0.75–1.05 0.45–0.55 6.0–13.0 1.35 0.85 14.0 3:11 3:03 1.20 0.75...
Programme chart Further programmes Maintenance programme The dishwasher wash cabinet is PowerWash 60 °C generally self-cleaning. However, if Programme for cleaning a mixed load residues or deposits occur, use the with fresh food deposits which have Maintenance programme to clean it. The begun to dry on.
Programme options Express Selecting programme options The Express programme option You can use programme options to reduces the programme duration. adjust the programmes. In order to achieve optimum cleaning To do this, you can select the results, the temperature, and therefore programme options before starting the the energy consumption, will increase programme.
Further programmes”) with dishwasher cleaner (see “Optional accessories – Maintenance”). Follow the instructions on the product packaging. Miele cleaning and care products are available to order from Miele Service or from Miele’s online store. Clean the filters in the wash cabinet regularly.
After cleaning, wipe the front dry using a soft cloth. A clean, damp microfibre cloth (such as the Original Miele all purpose microfibre cloth) without detergent can also be used.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm jets and bearings. The spray cutlery tray (if present).
Page 77
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upwards to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 78
Cleaning and care Refitting the spray arms Inserting the cutlery tray (if present) Reinstall the upper spray arm and Slide the cutlery tray back onto the tighten it by hand. rails from the front. Reinstall the middle spray arm. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling “Cleaning and care - Cleaning the from the suds solution.
Page 80
Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter downwards until the arrow in the viewing window and away from the filter combination. points to the lock symbol . ...
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock. The plastic housing of the water connection contains an electrical valve.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 83
Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Restart the desired programme. If the fault message appears again, there is a technical fault. Switch the dishwasher off. Turn off the tap. Call Miele. Waterproof The Waterproof system has reacted. Switch the dishwasher off.
Open the door manually (see “Using for the first time – Opening the door”) and switch the dishwasher back on. If the same fault message appears again, call Miele. The door locking pin does not retract after the door is opened. There may be a technical fault.
The on-site connection for the water drainage may be too low and you will need to vent the water drainage (see “Installation – Drainage”). A technical fault has occurred. Fault F18 Switch the dishwasher off. Turn off the tap. Call Miele.
Problem solving guide Water drainage fault Problem Possible cause and remedy The message Before rectifying the problem, you must: Drain appears in the Switch the dishwasher off. display. Water drainage fault. There might be water in the wash cabinet. ...
Problem solving guide General problems with the dishwasher Problem Possible cause and remedy The indicator lights and The dishwasher has switched off automatically to the display are dark. save energy. Switch the dishwasher back on with the button. Detergent residue is left The detergent compartment was still damp when in the detergent detergent was added.
Problem solving guide Noises Problem Possible cause and remedy Knocking noise in the A spray arm is knocking against a crockery piece. wash cabinet. Carefully open the door and rearrange the wash items that are obstructing the spray arm. Rattling noise in the Items of crockery are not secure in the wash cabinet.
Problem solving guide Unsatisfactory cleaning result Problem Possible cause and remedy The dishes are not The items were not loaded correctly. clean. See notes under “Loading the dishwasher”. The programme was not thorough enough. Select a more intensive programme (see “Programme chart”).
Page 92
Problem solving guide Problem Possible cause and remedy Dishes are not dry or The amount of rinse aid may be insufficient, or the cutlery and glasses are rinse aid reservoir is empty. blotchy. Replenish the rinse aid, increase the dosage, or change the brand of rinse aid (see “Using for the first time - Rinse aid”).
Page 93
Problem solving guide Problem Possible cause and remedy White residue is visible Not enough rinse aid was added. on the dishware. Increase the dosage (see “Settings – Rinse aid”). Clouding has occurred The salt reservoir is empty. on glassware and ...
Page 94
Problem solving guide Problem Possible cause and remedy There are rust stains on The affected items are not corrosion resistant. cutlery. There is no remedy. Purchase cutlery which is dishwasher safe. A programme was not run after dishwasher salt was added.
2 years. Miele. For further information, please refer to your warranty booklet. You can book a Miele customer service call-out online at www.miele.com.au/service or www.miele.co.nz/service. Contact information for Miele can be found at the end of this booklet.
- with glass protective formula against Miele appliances. corrosion These and many other useful products - specially designed cap for accurate can be ordered from the Miele online and easy dispensing store or a Miele Experience Centre. Dishwasher salt Detergents...
Page 97
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. IntenseClean - for use with the Maintenance programme (depending on model) without detergent dispensing - cleans the dishwasher effectively and thoroughly - removes grease, bacteria and...
(up to max. 60 °C). Provided that your dishwasher has If energy-saving water heating sources, been installed correctly, the Miele such as a solar water heating system, Waterproof system will protect you from are used, we recommend connecting to water damage throughout its lifetime.
Page 99
*INSTALLATION* Installation A tap with a ¾" male thread must be Risk of damage due to excessive provided on site. If this type of tap is pressure. not available, only a qualified plumber A brief increase in the water pressure may connect the dishwasher to the can damage components of the household water supply.
*INSTALLATION* Installation Drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system is fitted pressure or being tugged. with a non-return valve, which prevents dirty water from flowing back into the ...
Page 101
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide for the rollers of the lower basket in the door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water.
The dishwasher is supplied with a a specific mains connection cable of mains cable with moulded plug ready the same type (available Miele). For for connection to an earthed socket. safety reasons, such replacement may only be carried out by a suitably...
Technical data Technical data Dishwasher model Normal Height of freestanding 84.5 cm appliance (adjustable by +3.5 cm) Height of built-in appliance 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Niche height min. 80.5 cm (+6.5 cm) min. 84.5 cm (+6.5 cm) Width 59.8 cm 59.8 cm Niche width 60 cm 60 cm Depth of freestanding...
Page 107
Miele Experience Centre Wellington: 206-210 Coventry Street South Melbourne, VIC 3205 183 Featherston Street Wellington 6011 Miele Experience Centre and Office Sydney: 3 Skyline Place 0800 464 353 (0800 4 MIELE) Frenchs Forest, NSW 2086 www.miele.co.nz Miele Experience Centre and Office Brisbane:...