Related Manuals for Samsung VC-7413V
Summary of Contents for Samsung VC-7413V
-
Page 1: Operating Instructions
7400/ENG-00006D 1/18/01 4:26 PM Page 1 Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 2: Protecting The Environment
7400/ENG-00006D 1/18/01 4:26 PM Page 2 I M P O R TANT SAFEGUARDS This appliance must be connected to the same mains voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit. - Page 3 7400/ENG-00006D 1/18/01 4:26 PM Features marked with * may vary according to model. ASSEMBLING THE VACUUM - CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 3) Connect the nozzle to the suction t u b e . 4) Connect the body connector to the body of the cleaner.
-
Page 4: Power Cord
7400/ENG-00006D 1/18/01 4:26 PM POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) R E W I N D I N G When you have finished cleaning, disconnect the plug from the electri- cal outlet and simply press the cord rewind button lightly with your toe. -
Page 5: Using The Blower
7400/ENG-00006D 1/18/01 4:26 PM If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. NOTE: If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. -
Page 6: Park Position
7400/ENG-00006D 1/18/01 4:26 PM PARK POSITION Located in the top rear side of the v a c u u m - c l e a n e r, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. - Page 7 7400/ENG-00006D 1/18/01 4:26 PM 3 ) After removing the used dust bag, insert the cardboard bag collar of the new dust bag into the carrying bag, and then insert it in its original position NOTE: Used dust bag can be sealed by removing the film from the paper and sticking the latter over the suction opening.
-
Page 8: Troubleshooting
7400/ENG-00006D 1/18/01 4:26 PM USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTO R Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator when cleaning carpets.