Before you start Initial settings Run Calibration (recommended) Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration. 1. Power off, and then power on the washing machine. 2. Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode.
STEP 2 Empty pockets Empty all the pockets of your laundry items • Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the drum. Turn clothing with buttons and embroideries inside out •...
Page 4
Before you start STEP 6 Apply a proper detergent type The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Make sure to use the laundry detergent that is designed for automatic washing machines. NOTE •...
2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water or cycles that complete in less than one hour, it is recommended to use a liquid detergent. Otherwise, the capsule may not dissolve completely.
Page 6
Before you start NOTE The actual appearance of the softener guide may differ with the model. CAUTION • Do not open the detergent drawer while the washing machine is operating. • Do not use the following types of detergent in the drawer: - Tablet or capsule types - Ball or net types •...
Page 7
3. Apply fabric softener to the softener compartment. Do not exceed the max line (A). Softener is dispensed into the wash during the final rinse. 4. If you want to prewash, apply prewash detergent to the prewash compartment as instructed or recommended by the manufacturer.
Page 8
Before you start To use liquid detergent (applicable models only) First insert the provided liquid detergent guide in the main-wash compartment. Then, apply liquid detergent to the guide below the marked max line (A). NOTE • Insert the liquid detergent guide only after you remove the detergent drawer from the washing machine by pressing release lever (A).
Operations Control panel WW9*J5**5** WW8*J5**5**, WW7*J5**5** 01 Cycle Selector Turn the dial to select a cycle. The display shows current cycle information and estimated time 02 Display remaining, or an information code when a problem occurs. Press to change the water temperature for the current cycle. Temp.
Page 10
Operations Press to change the spinning speed for the current cycle. The revolutions per minute (RPM) differs with the model. • Rinse Hold : The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.
Simple steps to start WW9*J5**5** WW8*J5**5**, WW7*J5**5** 1. Press Power to turn on the washing machine. 2. Turn the Cycle Selector to select a cycle. 3. Change the cycle settings ( Temp., Rinse, and Spin) as necessary. 4. To add an option, press Options.
Page 12
Operations Cycle overview Standard cycles Cycle Description & Max load (kg) • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the rinse COTTON count are automatically adjusted according to the load. • Optimal performance with lower energy for cotton fabrics, bed linens, table linens, underwear, towels, COTTON or shirts.
Page 13
Cycle Description & Max load (kg) • For lightly soiled garments in less than 2.0 kg that you want to wash quickly. • Use less than 20 g of detergent. Using more than 15' QUICK WASH 20 g of detergent may leave detergent residue. •...
Page 14
Operations Options Option Description • This will add a preliminary washing cycle before the main Pre Wash wash cycle. • For badly soiled laundry. The operation time for each cycle is Intensive longer than normal. English Untitled-2 38 2017-03-13 5:17:18...
Page 15
Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1.
Page 16
Operations Settings Child Lock Sound On/Off To prevent accidents by children, Child You can turn on or off the sound from the Lock locks all buttons except for Power. washing machine. Your setting will be kept even after restarting the machine. •...
Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Eco drum clean Perform this cycle regularly to clean the drum and to remove bacteria. 1. Press Power to turn on the washing machine. 2.
Maintenance Smart Check To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the App Store, and install it on a mobile device featuring a camera function. The Smart Check function has been optimized for Galaxy & iPhone series (applicable models only).
Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover (A) to open.
Page 20
Maintenance Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord.
Pump filter It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged pump filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2.
Page 22
Maintenance Detergent drawer 1. While holding down the release lever (A) inside the drawer, slide open the drawer. 2. Remove the release lever and the liquid detergent guide from the drawer. 3. Clean the drawer components in flowing water using a soft brush. 4.
Recovery from freezing The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4.
Troubleshooting Checkpoints If you encounter a problem with the washing machine, first check the table below and try the suggestions. Problem Action • Make sure the washing machine is plugged in. • Make sure the door is properly closed. • Make sure the water taps are open. •...
Page 25
Problem Action • Make sure the drain hose is straightened all the way to the drain system. If you encounter a drain restriction, call for service. • Make sure the debris filter is not clogged. • Close the door and press or tap Start/Pause. For your safety, the washing machine will not tumble or spin unless the door Does not drain and/ is closed.
Page 26
Troubleshooting Problem Action • Plug the power cord into a live electrical outlet. • Check the fuse or reset the circuit breaker. • Close the door and press Start/Pause to start the washing machine. For your safety, the washing machine will not tumble or spin unless the door is closed.
Page 27
• Dry the washing machine interior after a cycle has finished. No bubbles are seen • Overloading may screen bubbles. (Bubbleshot models • Severely contaminated laundry may not generate bubbles. only). If a problem persists, contact a local Samsung service centre. English 51 Untitled-2 51 2017-03-13 5:17:20...
Water has overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre. Check the drain hose. • Make sure the end of the drain hose is placed on the floor.
Page 29
• If the information code remains, contact a customer service centre. The MEMS sensor is not working properly. • Turn the machine off, and restart the cycle. • If the information code remains, contact a local Samsung service centre. English 53 Untitled-2 53...
Page 30
• Turn the machine off, and restart the cycle. • If the information code remains, contact a local Samsung service centre. If any information code keeps appearing on the screen, contact a local Samsung service centre. English Untitled-2 54...
Specifications Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items.
Specifications Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
Specification sheet “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Type Front loading washing machine Model name WW9*J5**5** Dimensions W 600 x D 550 x H 850 (mm) Water pressure 50-800 kPa Net weight 61.0 kg Wash and spin capacity 9.0 kg 220 V...
Page 34
Specifications Type Front loading washing machine Model name WW7*J5**5** Dimensions W 600 x D 550 x H 850 (mm) Water pressure 50-800 kPa Net weight 61.0 kg Wash and spin capacity 7.0 kg 220 V 2000 W Power Washing and consumption heating 240 V...
Page 35
According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW9*J54*5** WW9*J52*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 36
Specifications According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW9*J53*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 37
According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW8*J54*5** WW8*J52*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 38
Specifications According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW8*J55*5** WW8*J53*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 39
According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW7*J54*5** WW7*J52*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 40
Specifications According to Regulation (EU) No. 1061/2010 “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Samsung Model Name WW7*J55*5** WW7*J53*5** Capacity Energy Efficiency on a scale from D (least efficient) to A+++ (most efficient) A+++ Annual energy consumption (It is based on 220 standard washing cycles for standard cotton course at 60 °C and 40...
Page 44
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT PORTUGAL 808 20 7267 www.samsung.com/pt/support DC68-03793M-00 Untitled-2 68 2017-03-13 5:17:24...