Page 1
Important: Should any of the guards become damaged, replace them immediately. Each part number is listed below. Replacements may be ordered through your authorized Toro distributor. Insert the following Location Table into the Operator’s Manual for the owner’s reference.
Page 2
Installing the Baffles previously removed, positioning them as shown in Figure 1. 1. Remove the 9 screws and nuts from the mounting holes provided in the front of the deck. Note: If not provided, use 5/16 x 3/4 inch flange head screws and 5/16 inch nuts.
Page 3
Use the chart below to determine the combinations of weight required. Order parts from your local Authorized Toro Distributor. Four Wheel Drive Groundsmaster 300 Series Traction Units do not need additional rear weight to comply with CE Standards.