Advertisement
Quick Links
Loose Parts
Note:
Use the chart below to identify parts used for assembly.
DESCRIPTION
Fitting
O–ring
Bolt 1/4–20 x 7/8" (22 mm)
Washer 1/4" (19 mm)
Nut (thin) 1/4"
Locate Fitting On Mower
1.
Shut off engine and and wait for all moving parts
to stop. Remove spark plug wire(s).
POTENTIAL HAZARD
If you leave the wire on the spark plug,
someone could start the engine.
WHAT CAN HAPPEN
Accidental starting of engine could
seriously injure you or other bystanders.
HOW TO AVOID THE HAZARD
Pull wire off spark plug before you do any
maintenance. Also push wire aside so it
does not accidentally contact spark plug.
2.
Clean underside and examine integrity of mower.
PART NO. 95–7067
QTY.
1
1
2
Install washout fitting
2
2
POTENTIAL HAZARD
Corroded or cracked mowers may be
weakened or damaged by drilling to install
washout fitting.
WHAT CAN HAPPEN
A weakened mower can crack or break.
Broken or missing pieces exposes you and
others to thrown objects or blade contact.
HOW TO AVOID THE HAZARD
Only install fitting on sound mowers.
Replace all broken or cracked mowers
immediately.
Never put your hands or feet under the
mower or through openings in the mower.
3.
Attach fitting to coupling on hose (Fig. 1).
FORM NO. 3319–285
INSTALLATION
INSTRUCTIONS
USE
1
Advertisement
Related Manuals for Toro 95-7067
Summary of Contents for Toro 95-7067
- Page 1 FORM NO. 3319–285 INSTALLATION PART NO. 95–7067 INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts used for assembly. DESCRIPTION QTY. Fitting O–ring Bolt 1/4–20 x 7/8” (22 mm) Install washout fitting Washer 1/4” (19 mm) Nut (thin) 1/4” Locate Fitting On Mower Shut off engine and and wait for all moving parts POTENTIAL HAZARD...
- Page 2 Installation Walk-Behind Mowers m–2911 Figure 1 1. Hose 3. Fitting 2. Coupling Select a location with the hose fitting assembly m–2859 on left side of mower inside the preferred Figure 3 location diagram (Fig. 2 or 3). 1. Left side of mower 2.
- Page 3 Installation Install Fitting Washing Underside of Mower Place fitting on mower facing outward, and After each use wash the underside of the mower to secure with (2) 1/4–7/8” (22 mm) bolts, (2) 1/4” prevent grass build-up for improved mulch action and (7 mm) washers and (2) 1/4”...
- Page 4 Installation Riding Mowers Maintenance Spread petroleum jelly on washout fitting o-ring to make coupling slide on easier and protect o-ring. POTENTIAL HAZARD A broken or missing washout fitting could expose you and others to thrown objects or m–2755 blade contact. Figure 7 WHAT CAN HAPPEN 1.