hit counter code
Sony RDR-GX330 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Recorder
  5. RDR-GX330 - DVD Recorder With TV Tuner
  6. Service manual

Sony RDR-GX330 Service Manual

Hide thumbs Also See for RDR-GX330:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
System
Laser: Semiconductor laser
Channel coverage (GX330):
NTSC
PAL-M (GX330:BR)
VHF: 2 to 13
UHF: 14 to 69
CATV: A-8 to A-1, A to W,
W+1 to W+84
Channel coverage (GX220):
PAL/SECAM* (BG, DK, I)
VHF: E2 to E12, R1 to R12,
Italian A to H, Ireland A to J,
South Africa 4 to 13
UHF: E21 to E69, R21 to R69,
B21 to B69
CATV: S01 to S05, S1 to S20
HYPER: S21 to S41
*not available on Oceanian models
Video reception: Frequency synthesizer
system
Audio reception:
(GX220): Split carrier system
(GX330): Inter carrier system
Antenna (GX330): 75-ohm antenna
terminal for VHF/UHF
Antenna/Aerial out (GX220):
75-ohm asymmetrical aerial socket
Timer: Clock: Quartz locked/Timer
indication:
24-hour cycle (digital)(GX220),
12-hour cycle (digital)(GX330)/
Power back-up duration: 1 hour
RDR-GX220/GX330
SPECIFICATIONS
Video recording format:
MPEG-2, MPEG-1
Audio recording format/applicable
bit rate: Dolby Digital 2 ch 256 kbps/
128 kbps (in EP and SLP mode)
Inputs and outputs
LINE OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p (NTSC)(GX330),
0.3 Vp-p (PAL)(GX220)
LINE 1 IN/LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p (NTSC)(GX330),
0.3 Vp-p (PAL)(GX220)
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
, P
) (GX330),
B
R
(Y, P
/C
, P
/C
) (GX220):
B
B
R
R
Phono jack/Y: 1.0 Vp-p/
P
, P
(GX330): 0.7 Vp-p
B
R
P
/C
(GX220): 0.7 Vp-p
B
B
P
/C
(GX220): 0.7 Vp-p
R
R
RMT-D229A/D229P
Australian/New Zealand Model
Singapore Model
Russian Model
Brazilian Model
General
Power requirements:
220 - 240 V AC,
50/60 Hz (GX220)
110 - 240 V AC,
50/60 Hz (GX330)
Power consumption: 22W
Dimensions (approx.):
430 × 58 × 291 mm
(width/height/depth) incl. projecting parts
Mass (approx.): 3.1 kg
Operating temperature: 5°C to 35°C
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1)
Power cord (mains lead) (1)
Antenna cable (aerial cable) (1)
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Plug adapter (GX330:E)
Specifications and design are subject to
change without notice.

DVD RECORDER

RDR-GX220
E Model
RDR-GX330

Advertisement

Table of Contents
loading

Related Manuals for Sony RDR-GX330

Summary of Contents for Sony RDR-GX330

  • Page 1: Dvd Recorder

    RDR-GX220/GX330 RMT-D229A/D229P Australian/New Zealand Model SERVICE MANUAL Singapore Model Russian Model RDR-GX220 Brazilian Model E Model RDR-GX330 SPECIFICATIONS Video recording format: System General MPEG-2, MPEG-1 Laser: Semiconductor laser Power requirements: Audio recording format/applicable Channel coverage (GX330): 220 - 240 V AC,...
  • Page 2 THESE COMPONENTS WITH SONY PARTS WHOSE PART CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY SUPPLEMENTS PUBLISHED BY SONY. DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 3: Table Of Contents

    RDR-GX220/GX330 TABLE OF CONTENTS SERVICE NOTE DISASSEMBLY DISC REMOVAL PROCEDURE IN THE TRAY 2-1. Upper Case ................. 2-2 CANNOT BE EJECTED (FORCED EJECTION) ... 5 2-2. Tray Cover Assembly ............2-2 2-3. Front Panel Section ............. 2-3 2-4. FL-155 Board, FR-237 Board ..........2-3 GENERAL 2-5.
  • Page 4 RDR-GX220/GX330 SERVICE MODE 6-1. Check Item ................6-1 6-2. Screen Transition in the Service Mode ......6-2 6-3. Items and Description of Service Mode Menu ....6-3 6-4. Device Check Menu (Diagnostic Test) ......6-4 ELECTRICAL ADJUSTMENT 7-1. Video System Adjustment (GX330) ......7-1 7-2.

  • Page 5: Service Note

    RDR-GX220/GX330 SERVICE NOTE 1. DISC REMOVAL PROCEDURE IN THE TRAY CANNOT BE EJECTED (FORCED EJECTION) 1. Remove the upper case. 2. Insert the stiff wire in the hole and eject the tray. Hole 1 Stiff wire Open the tray NOTES DURING THE FORCED EJECTION 1.

  • Page 6: General

    EMC television screen do not place objects filled with Sony is not liable and will not To avoid electrical shock, do not Directive using a connection indefinitely. If you leave the liquids, such as vases, on the open the cabinet.

  • Page 7: Hookups And Settings

    RDR-GX220/GX330 Maximum recordable number of titles Note on DualDiscs Playable discs A DualDisc is a two sided disc product which Disc Number of titles* mates DVD recorded material on one side DVD-RW/DVD-R with digital audio material on the other side. Icon used in However, since the audio material side does DVD+RW/DVD+R...

  • Page 8: Step 3: Connecting The Audio Cords

    Number power cord (mains lead) after all connections buttons are complete. Notes • If the supplied remote interferes your other Sony AC IN DVD recorder or player, change the command mode number for this recorder (page 17). to AC IN •...

  • Page 9: Step 6: Easy Setup

    If the supplied remote interferes with your will be unable to operate this recorder. Sony 01 (default) other Sony DVD recorder or player, set the Hitachi command mode number for this recorder and Changing programme positions the supplied remote to one that differs from...

  • Page 10: Connecting To A Satellite Or Digital Tuner

    RDR-GX220/GX330 Notes • Pictures containing copy protection signals that prohibit any copying cannot be recorded. Connecting to a Satellite or Digital Tuner • If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen. DVD recorder Connect a satellite or digital tuner to this recorder using the LINE 1 IN jacks.

  • Page 11: Playing The Recorded Programme (Title List)

    RDR-GX220/GX330 Select a title, and press ENTER. To change a title thumbnail picture Title List with Thumbnail Images 3. Playing the Recorded (Example: DVD+RW) (Thumbnail) (DVD-RW/DVD-R in VR mode The sub-menu appears. The sub-menu displays options only) Programme (Title List) applicable only to the selected item.

  • Page 12: Changing The Name Of A Recorder Programme

    RDR-GX220/GX330 Press </M/m/, to select the To use the number buttons Checking the remaining disc 5. Changing the Name of character you want to enter, and press You can also use the number buttons to enter space ENTER. characters. Refer to the number next to each a Recorded Programme row of letters on your TV screen.

  • Page 13: Reformatting A Disc

    RDR-GX220/GX330 Note Finalising the disc using “Disc Unfinalising a disc 8. Reformatting a disc On this model, 1 GB (read “gigabyte”) is equivalent to 1 billion bytes. The larger the number, the larger Information” display the disc space. Video Video Insert a disc.

  • Page 14: Time Recording (Standard/G-Code)

    RDR-GX220/GX330 Press TIMER. To stop recording during timer recording To extend the recording duration time Timer Recording Press x REC STOP. while recording Note that it may take a few seconds for the (Standard/G-Code) Press OPTIONS during recording to recorder to stop recording. select “Extend Rec,”...

  • Page 15: Checking/Changing/Cancelling Timer Settings (Timer List)

    RDR-GX220/GX330 When the timer settings overlap “Rec NR” (noise reduction): Reduces When all of the timer settings do not fit Checking/Changing/ noise contained in the video signal. on the list, the scroll bar appears. The programme that starts first has priority To view the hidden timer settings, press and the second programme starts recording Cancelling Timer...

  • Page 16: Playback

    RDR-GX220/GX330 If you connect a digital video camera with Select the title, and press ENTER. a DV IN jack The sub-menu appears. Playback See “DV Dubbing” on page 63 for an Select “Play,” and press ENTER. explanation of how to record from the DV IN Playback starts from the selected title.

  • Page 17: Searching For A Title/Chapter/Track, Etc

    RDR-GX220/GX330 Notes on playing DTS sound tracks on a “MNR” (mosquito noise reduction): Notes Adjusting the delay between • For DVD-RWs (VR mode), this function does not Reduces the faint noise appearing around work when recording: the outlines of the images. The noise the picture and sound (AV •...

  • Page 18: Erasing And Editing

    RDR-GX220/GX330 To rotate a picture About MP3 audio tracks, JPEG MP3 audio tracks, JPEG image About playback order of Press OPTIONS while the JPEG image is displayed to select “Rotate Right” or “Rotate image files, and DivX video files, or DivX video files that albums, tracks, and files Left,”...

  • Page 19: Erasing And Editing A Title

    RDR-GX220/GX330 When you finish selecting titles, Select point B using , and “Set Thumbnail”: Changes the title’s Erasing and Editing a thumbnail picture that appears in the select “OK,” and press ENTER. press ENTER. Title List (page 26). The list of the titles to be erased appears Playback pauses.

  • Page 20: Dv Dubbing

    RDR-GX220/GX330 To add the entire title to the Playlist title Note Combining multiple Playlist When the number of chapters in the title to be as one scene (Make a Playlist) combined exceeds the limit, the chapters at the end titles (Combine) Press TITLE LIST.

  • Page 21: Recording And Entire Dv Format Tape (One Touch Dubbing)

    RDR-GX220/GX330 Select “DV EDIT,” and press ENTER. When you finish adding scenes, press Recording an Entire DV Program Edit The display asks if you want to start selecting scenes. The scene list is displayed. Format Tape (One Touch Video Dubbing) Video You can select scenes from a DV/Digital8 format tape, and then automatically record...
  • Page 22 RDR-GX220/GX330 Channel Channel Set number Channel Channel Set number Channel Press M/m repeatedly until the programme Select “On” to turn on AFT. AS5A C52, C53 AS56 position you want is displayed. Turns on the Auto Fine The programme positions are scanned in the AS57 Tuning function.

  • Page 23: Video Settings (Video)

    RDR-GX220/GX330 Progressive Mode Pause Mode (DVDs only) 16 : 9 Video Settings (Video) DVD software can be divided into two types: Selects the picture quality in pause mode. film based software and video based Auto The picture, including software. Video based software is derived Video settings will adjust items related to the subjects that move from TV and displays images at 25 frames/50...

  • Page 24: Recording Settings (Recording)

    DVD equipment is assigned the same DVD Menu Command Mode. For details, see “If you Switches the language for the DVD menu. have a Sony DVD player or more than one Audio Sony DVD recorder” on page 17. Switches the language of the sound track.

  • Page 25: Easy Setup (Resetting The Recorder)

    Sony dealer. Select “SETUP,” and press ENTER. switch. Select “Easy Setup,” and press There is no picture or the picture noise Power ENTER.

  • Page 26: Self-Diagnosis Function

    The remote does not function. display. , Batteries are weak. The recorder automatically starts , Contact your Sony dealer or local , The remote is too far from the recorder. recording when the satellite receiver is , The remote’s manufacturer code returned to authorized Sony service facility.

  • Page 27: Specifications

    IEEE 1394 (S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p, data transport bus proposed by SONY, and is C: 0.3 Vp-p (PAL) a trademark approved by many corporations.
  • Page 28 RDR-GX220/GX330 Front panel display NICAM A Playing/recording status C NICAM indicator (36) B Displays the following (28): D Disc type* • Playing time/remaining time (angle) indicator (46) • Current title/chapter/track/index number • Recording time/recording mode • Clock • Programme position * Displays DATA CDs as “CD.”...

  • Page 29: Disassembly

    RDR-GX220/GX330 SECTION 2 DISASSEMBLY Note: The following flow chart shows the disassembly procedure. Upper case (Page 2-2) D.C. fan Tray cover assembly DVD drive RD-60 board Front panel section (Page 2-6) (Page 2-2) (Page 2-4) (Page 2-4) (Page 2-3) FL-155 board, AV-100 board Power block FR-237 board...

  • Page 30: Upper Case

    RDR-GX220/GX330 Note: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE 2 Three tapping screws (+BV3 (3-CR)) (3 x 8) 3 Upper case 1 Two tapping screws 2-2. TRAY COVER ASSEMBLY Hole 3 Two claws 1 The stiff wire 2 Open the tray 4 Tray cover assembly...

  • Page 31: Front Panel Section

    RDR-GX220/GX330 2-3. FRONT PANEL SECTION 1 Five claws 2 Three claws 3 Front panel section 2-4. FL-155 BOARD, FR-237 BOARD 1 Flexible flat cable 9 Harness (RF-117) (FAR-003) (CN3002) (CN3004) 3 Flexible flat cable (FAR-002) (CN3005) 7 Remove the FL-155 board in the direction of the arrow.

  • Page 32: Dvd Drive

    RDR-GX220/GX330 2-5. DVD DRIVE 3 Four tapping screws 5 Two Non-HALOGENE tapes (+BV3 (3-CR)) (3 x 10) 6 Flexible flat cable (FRD-010) 2 Connector (CN1) 8 DVD drive 4 Remove the DVD section in the direction of the arrow. 7 Harness (PD-137) 1 Flexible flat cable (FRD-010)(CN101) 2-6.

  • Page 33: Av-100 Board

    RDR-GX220/GX330 2-7. AV-100 BOARD 2 Connector (CN103) 1 The wire pin that holds 4 Flexible flat cable the harness is set up. (FAR-002) (CN701) 3 The wire pin that holds the flexible flat cables are set up. 5 Flexible flat cable (FAR-003) (CN602) qs Three tapping screws (+BV 3 x 8)

  • Page 34: Power Block

    RDR-GX220/GX330 2-8. POWER BLOCK 3 Three tapping screws (+BV3 (3 - CR)) (3 x 8) 4 Remove the Power block in the direction of the arrow. 2 Tapping screw (+P 3 x 8) 1 Connector (CN3) 2-9. D. C. FAN 4 Remove the D.C.

  • Page 35: Circuit Boards Location

    RDR-GX220/GX330 2-10. CIRCUIT BOARDS LOCATION Power block AV-100 board (POWER, AUDIO IN, AUDIO OUT, TUNER, IT CONTROLLER, VIDEO IN/OUT) FL-155 board (POWER SWITCH) RD-60 board FR-237 board (FR-237RISM3, TA_SATA CN, V DEC, DTT-IF, (FL DRIVE, LINE2 IN, Flash ROM/OPTION CN, AV_CN/POWER, FUNCTION SW) DV-PHY, PLL-AUDIO_AD_DA) 2-7E...

  • Page 36: Block Diagrams

    SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM J701 AV-100 BOARD J701 LINE OUT IC702 S VIDEO (RDR-GX220) (RDR-GX330) VIDEO COMPONENT VIDEO AMP SELECTOR TU401 TU401 AUDIO L VIDEO OUT AERIAL UHF/VHF AUDIO R TUNER TUNER TU VIDEO V,C,Y COAXIAL...

  • Page 37: Av-100 Block Diagram

    CVBS OUT SELECTOR J701 C OUT S-Y OUT 27 LINE OUT CVBS1 Y2 IN C-Y OUT 25 S VIDEO C2 IN (RDR-GX220) (RDR-GX330) VIDEO COMPONENT V2 IN Cb OUT CVBS3 TU401 TU401 AUDIO L VIDEO OUT AERIAL UHF/VHF Cr OUT 21...

  • Page 38: Block Diagram

    RDR-GX220/GX330 3-3. RD-60 BLOCK DIAGRAM RD-060 BOARD FR-237 BOARD(2/2) FR5V RECDY 1 VOUT AT1DATA0 RECCCR FL-155 BOARD IDE D0-D15 AT1DATA15 IC3002 Q601 COUT S3101 REMOTE COMMANDER AD10 COUT C6,C7 SIRCS RECIEVER POWER AT1 ADRO,ADR1 ADE A0-A4 D6,D7 KEY 0 ADR2,CSO,CS1 Q602 YOUT YOUT...

  • Page 39: Power Block Diagram

    PHOTO COUPLER 3.3V REG SW3.3V VOUT CONT C114 IC109 3.3V REG IC301 L101 SW3.3V TU401 TUNER VOUT VIDEO DECODER NC: RDR-GX330 NC: RDR-GX330 CONT IC302 L102 5V: RDR-GX220 30V: RDR-GX220 AV-100 BOARD 1.3 REG L302 (RDR-GX220) UNSW12V L301 L303 VOUT...

  • Page 40: Frame Schematic Diagram

    RDR-GX220/GX330 SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM CN103 FAN_OUT FAN_DET CN3 11P CN104 11P AV-100 UNSW12V UNSW12V UNSW6V UNSW6V UNSW6V UNSW6V SW5V SW5V UNSW4V UNSW4V POWER UNSW4V UNSW4V UNSW-8V UNSW-8V PCONT PCONT FRA-003 FRA-005 PD-137 B TO B FFC 1.0mm...

  • Page 41: Waveforms

    RDR-GX220/GX330 WAVEFORMS 4-2. SCHEMATIC DIAGRAMS AV-100 BOARD THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) X602 J701 COMPONENT PR (C/BAR PB)* X1401 6 For schematic diagrams: • All capacitors are in µF unless otherwise noted. pF : µµF. 50V or less are not indicated except for electrolytics and RDR-GX220 ONLY tantalums.

  • Page 42: Rd-60 Board

    RDR-GX220/GX330 AV-100 (POWER, AUDIO IN, AUDIO OUT, TUNER, IT CONTROLLER, VIDEO IN/OUT) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. AV-100 (SIDE A) Power block AV-100 board...
  • Page 43 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (1/6) BOARD POWER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE The components identified by mark or dotted line with mark are critical for safety.
  • Page 44 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (2/6) BOARD AUDIO IN -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE AUDIO IN 4-10 AV-100 (2/6)
  • Page 45 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (3/6) BOARD AUDIO OUT -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE AUDIO OUT AV-100 (3/6) 4-11 4-12...
  • Page 46 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (4/6) BOARD TUNER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE TUNER 4-13 4-14 AV-100 (4/6)
  • Page 47 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (5/6) BOARD IT CONTROLLER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE The components identified by mark or dotted line with mark are critical for safety.
  • Page 48 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-5 for printed wiring board of AV-100 board. • Refer to page 4-4 for waveform AV-100 (6/6) BOARD VIDEO IN/OUT -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE VIDEO IN/OUT 4-17 4-18 AV-100 (6/6)
  • Page 49 RDR-GX220/GX330 FL-155 (POWER SWITCH) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. FL-155 BOARD (SIDE A) FL-155 BOARD (SIDE B) Power block AV-100 board (POWER, AUDIO IN, AUDIO OUT,...

  • Page 50: Fl Drive, Line2 In, Function Sw

    RDR-GX220/GX330 FR-237 (FL DRIVE, LINE2 IN, FUNCTION SW) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. FR-237 (SIDE A) Power block AV-100 board (POWER, AUDIO IN, AUDIO OUT,...
  • Page 51 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-21 for printed wiring board of FR-237 board. FR-237 BOARD FL DRIVE, LINE2 IN, FUNCTION SW -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE FL DRIVE, LINE2 IN, FUNCTION SW FR-237 4-23 4-24...
  • Page 52 RDR-GX220/GX330 RD-60 (RISM3, VDEC, A/V INTERFACE, AUDIO DAC/ADC) PRINTED WIRING BOARD • : Uses unleaded solder. RD-60 (SIDE A) RD-60 (SIDE B) JL620 FB606 JL637 RB601 JL636 JL123 JL619 JL618 JL622 IC605 C614 JL640 JL638 CL627 R660 R661 JL631 JL630 JL1001 JL626 JL644...
  • Page 53 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (1/8) BOARD RISM3 -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE TO DISK DRIVE CN202 (PAGE 4-59) SIGNAL PATH...
  • Page 54 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (2/8) BOARD ATA_SATA CN -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE ATA_SATA CN 4-29 4-30 RD-60 (2/8)
  • Page 55 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (3/8) BOARD V DEC -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE V DEC 4-31 RD-60 (3/8) 4-32...
  • Page 56 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (4/8) BOARD DTT-IF -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE DTT-IF 4-33 4-34 RD-60 (4/8)

  • Page 57: Flash Rom/Option Cn

    RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (5/8) BOARD Flash ROM/OPTION CN -REF.NO.:1000 SERIES- XX MARK:NO MOUNT RISM3 [P1] NO MARK:PB MODE MARKED:MOUNT TABLE RISM3 [P1] FLASH MEMORY [P5] Flash ROM/OPTION CN...
  • Page 58 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (6/8) BOARD AV_CN/POWER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE AV_CN/POWER 4-37 4-38 RD-60 (6/8)
  • Page 59 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (7/8) BOARD DV-PHY -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE DV-PHY 4-39 RD-60 (7/8) 4-40...
  • Page 60 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-25 for printed wiring board of RD-60 board. • Refer to page 4-4 for waveform RD-60 (8/8) BOARD PLL-AUDIO_AD_DA -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE PLL-AUDIO_AD_DA 4-41 4-42 RD-60 (8/8)

  • Page 61: Power Block (Srv1855Ek) Printed Wiring Board

    RDR-GX220/GX330 POWER BLOCK (SRV1855EK) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. POWER BOARD (SRV1855EK) (SIDE A) (GX220) Power block AV-100 board (POWER, AUDIO IN, AUDIO OUT, TUNER, IT CONTROLLER, VIDEO IN/OUT)
  • Page 62 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-43 for printed wiring board of Power board. POWER BOARD POWER SUPPLY (SRV1855EK) (GX220) -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE TO DRIVE TO AV-100 BOARD CN104 (PAGE 4-7) The components identified by mark or dotted line with mark...

  • Page 63: Power Block (Srv1856Ww) Printed Wiring Board

    RDR-GX220/GX330 POWER BLOCK (SRV1856WW) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. POWER BOARD (SRV1856WW) (SIDE A) (GX330) Power block AV-100 board (POWER, AUDIO IN, AUDIO OUT, TUNER, IT CONTROLLER, VIDEO IN/OUT)
  • Page 64 RDR-GX220/GX330 For Schematic Diagram • Refer to page 4-41 for printed wiring board of Power board. POWER BOARD POWER SUPPLY (SRV1856WW) (GX330) -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE TO DRIVE TO AV-100 BOARD CN104 (PAGE 4-7) The components identified by mark or dotted line with mark...

  • Page 65: Ic Pin Function Description

    RDR-GX220/GX330 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC603: M306H5FGFP-C35FP/-C37FP) (AV-100 BOARD)) Pin No. Pin name Function ONDO Detection of board temperature SIRCSIN Input of remote control signal AVLINK-IN Fixed at “L” FLD_DATA Output of FLD data signal FLD_IN Fixed at “L”...
  • Page 66 RDR-GX220/GX330 Pin No. Pin name Function FAN_SPEED Output of fan direction speed switching signal (“H”:high speed) P_FAIL Input of UNSW6V power off detection signal HDET_1 Detection of output video signal Fixed at “L” HDET_2 Not used INSEL_PCONT Output of IC’s power supply signal (“H”:INSEL) XP_AMUTE Output of muting signal for audio SLICE_V_SW...
  • Page 67 RDR-GX220/GX330 Pin No. Pin name Function TU_G_MAX_1 Input of tuner gain signal VREF Power supply input (Analog 5V) AVCC — Power supply input (Analog 5V) TEST3_CONT Not used START Fixed at “H” SYNCIN Input composite video signal SVREF When slice the vertical synchronous signal input slice power TEST2 Fixed at GND VDD3...

  • Page 68: Main Control Ic (Ic103: R8A34012Bg (Rd-60 Board))

    RDR-GX220/GX330 5-2. MAIN CONTROL IC (IC103: R8A34012BG (RD-60 BOARD)) Pin No. Pin name Function AT1DATA[11] — Input/output of data 11 AT1DATA[12] — Input/output of data 12 AT1DATA[14] — Input/output of data 14 AT1DIOW Output of write signal AT1INTRQ Input of IRQ HDREQ[0] —...
  • Page 69 RDR-GX220/GX330 Pin No. Pin name Function TRST Not used VCCAAD10A — Power supply input (Analog 3.3V)(ADC) VROA — Fixed at “L” VROB — Fixed at “L” VCCAAD10B — Power supply input (Analog 3.3V)(ADC) VCCADA10 — Power supply input (Analog 3.3V)(DAC) VCCADA10 —...
  • Page 70 RDR-GX220/GX330 Pin No. Pin name Function VSSADA10 — Analog GND BOUT(PD2) Output of analog video signal (blue) VSSADA10 — Analog GND AD10 COUT(PD3) Output of analog video signal (chroma) AD11 TESTMOD[2] Fixed at “L” AD12 TESTMOD[7] Fixed at “L” AD13 SDI-ICE/JTAG TMS AD14 REC656O[0]...
  • Page 71 RDR-GX220/GX330 Pin No. Pin name Function HADRS[27] Output of address 27 HADRS[23] Output of address 23 HADRS[20] Output of address 20 HADRS[16] Output of address 16 HADRS[12] Output of address 12 HADRS[8] Output of address 8 MSBS — Fixed at “L” MSDATA[2] —...
  • Page 72 RDR-GX220/GX330 Pin No. Pin name Function HADRS[9] Output of address 9 MSINS — Fixed at “L” SCLK[2] — Fixed at “H” CTS[2] — UART(CSIO)/GPIO TX[0] — UART(CSIO)/GPIO TX[3] — Fixed at “H” RX[3] — Fixed at “H” VMCLK Input of 27MHz system clock RX[0] —...
  • Page 73 RDR-GX220/GX330 Pin No. Pin name Function HDATA[6] — Input/output of data 6 HDATA[3] — Input/output of data 3 HDATA[2] — Input/output of data 2 AT2DATA[0] — Fixed at “L” AT2DATA[15] — Fixed at “L” AT2DMAREQ Not used AT2DIOW Not used —...
  • Page 74 RDR-GX220/GX330 Pin No. Pin name Function Digital GND Digital GND Digital GND Digital GND — Power supply input (Digital 1.0V) DDATA[30] — Input/output of data 30 DDATA[31] — Input/output of data 31 VDD25 — Power supply input (Digital 2.5V) HWAIT —...
  • Page 75 RDR-GX220/GX330 Pin No. Pin name Function DDATA[17] — Input/output of data 17 A0LRCKI Input of audio L/R clock signal DACCLKO Not used SPDIFI Fixed at “H” PHYDIO[7] — Not used Digital GND DDM[2] Output of data mask signal 2 DDQS[3] Output of data strobe signal 3 DDATA[24] Input/output of data 24...

  • Page 76: Service Mode

    RDR-GX220/GX330 SECTION 6 SERVICE MODE This is the diagnostics to locate cause of fault. The diagnostics can be executed using the remote commander and a monitor. To enter the service mode, connect the VIDEO OUT connector of the main unit to the monitor. While pressing the “A” (Open/Close) button and the “G”...

  • Page 77: Screen Transition In The Service Mode

    MODEL SYSCON Version [ < RETURN > HDD Serial ID [ Setting ON/OFF of the NTSC 100% white signal output HDD Sony ID [ << Display Color >> 1) White Signal ON < 2 > 2) White Signal OFF < RETURN >...

  • Page 78: Items And Description Of Service Mode Menu

    (8) When the key “8” is pressed down, the monitor display moves to HDD Serial ID [ the Device Check menu screen. Sony ID [ (9) Key “9” is not used. (0) When the key “0” is pressed down, the monitor display moves to the G-code Setting menu screen.

  • Page 79: Video System Adjustment (Gx330)

    RDR-GX220/GX330 SECTION 7 ADJUSTMENT 7-1. Video System Adjustment (GX330) 2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video Y-signal output has the rated Preparing for Adjustment amplitude. If it adjusted incorrectly, the playback video signal will not Equipments be displayed corrected even when the S-video cable is connected.
  • Page 80 RDR-GX220/GX330 3. S-Video Output S-C Check 5. Component Video Output B-Y Check <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video NTSC standard. If it adjusted incorrectly, the playback color will not conforms to the NTSC standard.

  • Page 81: Video System Adjustment (Gx220)

    RDR-GX220/GX330 7-2. Video System Adjustment (GX220) 2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video Y-signal output has the rated Preparing for Adjustment amplitude. If it adjusted incorrectly, the playback video signal will not Equipments be displayed corrected even when the S-video cable is connected. •...
  • Page 82 RDR-GX220/GX330 3. S-Video Output S-C Check 5. Component Video Output B-Y Check <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the PAL This check confirms that the B-Y signal of the component video standard. If it adjusted incorrectly, the playback color will not be too conforms to the PAL standard.

  • Page 83: Repair Parts List

    RDR-GX220/GX330 SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS The components identified by mark or dotted line with mark are critical for safety. NOTE: Replace only with part number • -XX, -X mean standardized parts, so they • Abbreviation specified. may have some difference from the origi- : Australian/New Zealand Model nal one.

  • Page 84: Chassis Section

    RDR-GX220/GX330 8-1-2. CHASSIS SECTION supplied supplied TU401 supplied supplied supplied supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1185-339-A RD-60(SE3) S COMPL (GX330:E) X-2109-036-1 COVER ASSY, TRAY A-1185-341-A RD-60(SAU) S COMPL (GX220:AUS) (EXCEPT (GX330:BR)) A-1184-343-A RD-60(SRU) COMPL (GX330:RUS) A-1206-210-A COVER ASSY, TRAY (GX330:BR) A-1185-340-A RD-60(SBR) S COMPL (GX220:BR)

  • Page 85: Electrical Parts List

    RDR-GX220/GX330 AV-100 8-2. ELECTRICAL PARTS LIST The components identified by mark or dotted line with mark are critical for safety. NOTE: Replace only with part number • Due to standardization, replacements in • SEMICONDUCTORS specified. the parts list may be different from the In each case, u: µ, for example: parts specified in the diagrams or the uA.
  • Page 86 RDR-GX220/GX330 AV-100 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C315 1-164-218-11 CERAMIC CHIP 180PF 5.00% C623 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 20.00% C316 1-126-947-11 CAP, ELECT 47MF C624 1-162-923-11 CERAMIC CHIP 47PF 5.00% 1-126-947-11 CAP, ELECT 47MF 20.00% C317...
  • Page 87 RDR-GX220/GX330 AV-100 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C743 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% FB702 1-500-283-11 FERRITE 0UH (GX220:RUS) C744 1-126-947-11 CAP, ELECT 47MF FB703 1-500-283-11 FERRITE 0UH (GX220:RUS) C745 1-126-947-11 CAP, ELECT 47MF FB704 1-500-283-11 FERRITE...
  • Page 88 RDR-GX220/GX330 AV-100 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark <TRANSISTOR> R1412 1-216-846-91 METAL CHIP 120K 1/10W (GX220) Q101 8-729-421-19 TRANSISTOR UN2213 R1415 1-216-825-91 METAL CHIP 2.2K 1/10W \ Q1401 8-729-010-05 TRANSISTOR MSB709-RT1 (RDR-GX220) (GX220) Q1402 8-729-010-29 TRANSISTOR MSD601-RST1 (RDR-GX220) R1416...
  • Page 89 (GX330) R313 1-218-864-11 METAL CHIP 5.1K 0.5% 1/10W R483 1-216-809-91 METAL CHIP 1/10W R314 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W (RDR-GX330) R315 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W R603 1-216-833-91 METAL CHIP 1/10W R316 1-216-825-91 METAL CHIP 2.2K 1/10W (GX330)
  • Page 90 RDR-GX220/GX330 AV-100 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R635 1-216-809-91 METAL CHIP 1/10W R744 1-216-801-91 METAL CHIP 1/10W R636 1-216-809-91 METAL CHIP 1/10W R747 1-218-285-11 METAL CHIP 1/10W R637 1-218-289-91 METAL CHIP 1/10W (GX220) R639 1-216-825-91 METAL CHIP...
  • Page 91 RDR-GX220/GX330 FL-155 FR-237 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FL-155 BOARD, COMPLETE <FERRITE> *********************** FB3006 1-414-228-11 FERRITE 0UH (GX220:RUS ) FB3007 1-414-228-11 FERRITE 0UH (GX220:RUS ) <CONNECTOR> CN3101 1-779-353-51 CONNECTOR, FFC/FPC 5P <IC> IC3001 8-759-643-83 IC UPD16315GB-3BS <SWITCH>...
  • Page 92 RDR-GX220/GX330 FR-237 RD-60 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3043 1-216-864-11 SHORT CHIP C120 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% S3001 1-771-410-21 SWITCH, TACT C121 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% S3002 1-771-410-21 SWITCH, TACT C122 1-125-777-11 CERAMIC CHIP 0.1UF...
  • Page 93 RDR-GX220/GX330 RD-60 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C191 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% C334 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% C192 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% (GX220:RUS,SP) C193 1-125-777-11 CERAMIC CHIP 0.1UF 10.00% C335 1-125-777-11 CERAMIC CHIP 0.1UF...
  • Page 94 RDR-GX220/GX330 RD-60 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C812 1-165-887-91 CERAMIC CHIP 0.22UF 6.3V L301 1-469-555-21 INDUCTOR 10UH (GX220:RUS,SP) C813 1-124-779-00 ELECT CHIP 10UF 20.00% L302 1-469-555-21 INDUCTOR 10UH (GX220:RUS,SP) C816 1-165-887-91 CERAMIC CHIP 0.22UF 6.3V L303...
  • Page 95 RDR-GX220/GX330 RD-60 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R109 1-218-941-81 RES-CHIP 1/16W R190 1-208-699-11 RES,METAL FILM CHIP 4.7K (1005) R110 1-218-990-81 SHORT CHIP R191 1-208-699-11 RES,METAL FILM CHIP 4.7K (1005) R111 1-218-941-81 RES-CHIP 1/16W R192 1-208-699-11 RES,METAL FILM CHIP 4.7K (1005)
  • Page 96 RDR-GX220/GX330 RD-60 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R533 1-218-990-11 SHORT CHIP R658 1-216-821-91 METAL CHIP 1/10W R535 1-218-962-11 RES-CHIP 5.6K 1/16W R661 1-218-990-11 SHORT CHIP R546 1-218-990-11 SHORT CHIP R701 1-216-864-11 SHORT CHIP R547 1-218-990-11 SHORT CHIP...
  • Page 97 RDR-GX220/GX330 RD-60 POWER BLOCK (SRV1855EK) POWER BLOCK (SRV1856WW) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RB150 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB151 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB152 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB154 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB155 1-234-400-21 CONDUCTOR, NETWORK (2010X4)
  • Page 98 RDR-GX220/GX330 2006F0100-1 Sony Corporation 2006.06 Home Electronics Network Company. 9-883-921-11 Published by Product Design 1 Department 8-16 – 152 –...

This manual is also suitable for:

Rmt-d229aRmt-d229p

Table of Contents