hit counter code
Sony RDR-GX300 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Recorder
  5. RDR-GX300
  6. Service manual

Sony RDR-GX300 Service Manual

Hide thumbs Also See for RDR-GX300:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
System
Laser: Semiconductor laser
Channel coverage:
NTSC
VHF: 2 to 13/UHF: 14 to 69/CATV: A-8 to
A-1, A to W, W+1 to W+84
Video reception: Frequency synthesizer
system
Audio reception: Split carrier system
Antenna: 75-ohm antenna terminal for VHF/
UHF
Timer: Clock: Quartz locked/Timer indication:
12-hour cycle (digital)/Power back-up
duration: 1 hour
Video recording format: MPEG Video
Audio recording format/applicable bit rate:
Dolby Digital/2 ch, 256 kbps
When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL or COAXIAL) jack
are converted to 48 kHz sampling frequency.
Inputs
(Jack name: Jack type/input level/input
impedance)
LINE IN 1/2/3
(AUDIO): Phono jack/2 Vrms/more than 22
kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C:
0.286 Vp-p
All manuals and user guides at all-guides.com
SPECIFICATIONS
Outputs
(Jack name: Jack type/output level/output
impedance)
LINE OUT 1/2
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C:
0.286 Vp-p
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
Phono jack/Y: 1.0 Vp-p/P
interlace*=0.648 Vp-p, progressive or
interlace**=0.7 Vp-p
*
"Y/Pb/Pr Out Black Level" is "On"
** "Y/Pb/Pr Out Black Level" is "Off"
SET TOP BOX CONTROL:
Mini jack
RDR-GX300
Canadian Model
General
Power requirements: 120 V AC, 60 Hz
Power consumption: 37 W
Dimensions (approx.): 430 × 85 × 345 mm
(17 × 3
3
/
8
incl. projecting parts
Mass (approx.): 4.8 kg (10.58 lb)
Operating temperature: 5 ºC to 35 ºC
(41 ºF to 95 ºF)
Operating humidity: 25 % to 80 %
Supplied accessories:
Audio/video cord (1)
Power cord (1)
, P
):
Antenna cable (1)
B
R
Set top box controller (1)
, P
:
B
R
Remote commander (remote) (1)
Size AA(R6) batteries (2)
Specifications and design are subject to change
without notice.
DVD RECORDER
RMT-D205A
US Model
× 13
5
/
in.) (width/height/depth)
8

Advertisement

Table of Contents
loading

Related Manuals for Sony RDR-GX300

Summary of Contents for Sony RDR-GX300

  • Page 1 RDR-GX300 All manuals and user guides at all-guides.com RMT-D205A SERVICE MANUAL US Model Canadian Model SPECIFICATIONS System Outputs General Laser: Semiconductor laser (Jack name: Jack type/output level/output Power requirements: 120 V AC, 60 Hz Channel coverage: impedance) Power consumption: 37 W Dimensions (approx.): 430 ×...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com TABLE OF CONTENTS SERVICE NOTE 2-5. TRAY COVER ASSEMBLY ·········································· 2-5 2-6. DVD DRIVE ··································································· 2-6 DISK REMOVAL PROCEDURE IF THE TRAY 2-7. FRONT PANEL SECTION ············································· 2-7 CANNOT BE EJECTED (FORCED EJECTION) ············ 5 2-8.
  • Page 4 All manuals and user guides at all-guides.com • RD-50 (13/19) (SDRAM, NAND FLASH) SCHEMATIC DIAGRAM ···························· 4-53 • RD-50 (14/19) (SWA/UNSW BUFFER-1) SCHEMATIC DIAGRAM ···························· 4-55 • RD-50 (15/19) (SWA/UNSW BUFFER-2) SCHEMATIC DIAGRAM ···························· 4-57 • RD-50 (16/19) (FLASH ROM) SCHEMATIC DIAGRAM ····························...

  • Page 5: Service Note

    All manuals and user guides at all-guides.com SERVICE NOTE 1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) Remove the upper case. Remove the RD-50 board, RD bracket. Insert the stiff wire in the hole and eject the tray. Tray The hole Fig.
  • Page 6 All manuals and user guides at all-guides.com MEMO — 6 —...

  • Page 7: General

    To prevent fire or shock hazard, due to a malfunction of the 3 Heed all warnings. whenever you call upon your Sony dealer required when the apparatus has found to comply with the limits set do not expose the unit to rain or recorder, disc, etc.

  • Page 8: Quick Guide To Disc Types

    All manuals and user guides at all-guides.com Quick Guide to Disc Types Recordable and playable discs Recording Features Editing Features Icon Compatibility with Disc used in Formatting Type other DVD players Auto Manual Record Change Logo this (new discs) Rewrite Delete title A-B Erase Playlist...

  • Page 9: Hookups And Settings

    All manuals and user guides at all-guides.com Using the cable box/satellite A: Cable box or satellite receiver with a video/audio output Hookups and Settings receiver control function With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the satellite receiver or cable box is turned on.

  • Page 10: Step 3: Connecting The Video Cords

    All manuals and user guides at all-guides.com Connecting to a video input jack Using the PROGRESSIVE button Step 3: Connecting the Video Cords Connect the yellow plug of the audio/video cord By using the PROGRESSIVE button on the Select one of the following patterns A through C, according to the input jack on your TV monitor, (supplied) to the yellow (video) jack.

  • Page 11: Step 5: Connecting The Power Cord

    VOL +/– J.C.Penney 04, 10, 12 Notes TV/VIDEO • If the supplied remote interferes your other Sony DVD recorder or player, change the command mode number to AC outlet for this recorder (page 22). Magnavox 03, 04, 08, 12, 21 •...

  • Page 12: Setting Up The Vcr Plus System

    All manuals and user guides at all-guides.com Switch the input selector on your TV so that Once the clock is set, the Setup Display for If you connect the satellite receiver or cable “4:3 Letter Box”: For standard TVs. cable box/satellite receiver control appears. box to the recorder’s antenna input (page 14), Displays “wide screen”...

  • Page 13: Connecting A Vcr Or Similar Device

    All manuals and user guides at all-guides.com If you connected a cable box or satellite Connecting a VCR or Similar Device receiver to the recorder and set “Set Top Box Control” to “On,” enter the TV channel number on your cable box. After disconnecting the recorder’s power cord from an AC outlet, connect a VCR or similar recording If you connected a cable box and set “Set Top device to the LINE IN jacks of this recorder.

  • Page 14: Using The Title List

    All manuals and user guides at all-guides.com Standard Title List (Example: DVD-RW in VR To scroll the list display by page (Page mode) TOOLS Using the Title List mode) Press CURSOR MODE while the list display is turned on. The display enters Page mode. Each The TOOLS menu appears when you press time you press M/m, the entire Title List changes TOOLS, and displays options applicable to the...

  • Page 15: Checking The Play Information And Playing Time

    All manuals and user guides at all-guides.com B Available functions for DVD VIDEOs Select “Finalize,” and press ENTER. Finalizing a disc (preparing a disc Checking the Play The display shows the approximate time angle/ audio/ subtitle, etc.) for playback on other equipment) required for finalizing and asks for C The current selected function or audio Information and Playing...

  • Page 16: Recording

    All manuals and user guides at all-guides.com Recording mode Recording time Copy control Recordable discs Timer Recording (Standard/ (minute) signals Recording VCR Plus+) HQ (High quality) Copy-Free Video Before Recording Video SP (Standard mode) Copy-Once Ver.1.1 with You can set the timer for a total of 30 programs, up Before you start recording…...

  • Page 17: Checking/Changing/Canceling Timer Settings (Timer List)

    All manuals and user guides at all-guides.com Select “OK,” and press ENTER. Select one of the options, and press To turn off the Timer List Checking/Changing/ Press O RETURN. The date, start and stop times, channel, and ENTER. recording mode appear. “Modify”: Changes the timer setting.

  • Page 18: Recording From A Vcr Or Similar Device

    All manuals and user guides at all-guides.com This function works with DVD-Rs and DVD- Adjusting the recording picture Checking the disc status while Recording From a VCR or RWs (Video mode) when the recording mode quality and size recording is set to HQ, HSP, or SP. For all other Similar Device recording modes, the screen size is fixed at You can adjust the recording picture quality and...
  • Page 19 The TOOLS menu appears. • When you select one of the surround modes, turn off by Sony to produce “TVS OFF”: No surround effect the surround settings of the connected TV or amplifier home surround sound Select “Video Settings,”...

  • Page 20: Chasing Playback/Simultaneous Rec And Play

    All manuals and user guides at all-guides.com Press </, to adjust the setting, and Adjusting the sound quality Playing a previous recording while Chasing Playback/ press ENTER. making another The default settings are underlined. Simultaneous Rec and Play Video “ Y NR ”...

  • Page 21: Editing

    All manuals and user guides at all-guides.com Notes Edit options for DVD-RWs (VR mode) • Depending on the software you use to create the DATA Editing CD, the playback order may differ from the above illustration. Before Editing • Proceeding to the next or another album may take some You can enjoy advanced edit functions.

  • Page 22: Creating And Editing A Playlist

    All manuals and user guides at all-guides.com Select a title, and press ENTER. Press TOOLS and select “Disc Map,” and Creating chapters manually Creating and Editing a A check mark appears in the check box next to press ENTER. the selected title. To clear the check mark, The Disc Map appears.

  • Page 23: Settings And Adjustments

    All manuals and user guides at all-guides.com Combining multiple Playlist titles SETUP (Combine Titles) Settings and Adjustments Settings Tuner Preset Video Set VCR Plus+ Channels Using the Setup Displays Audio Clock Features Set Top Box Control Options Language Press TITLE LIST to turn on the Title List By using the Setup Displays, you can make Easy Setup (Playlist) menu.

  • Page 24: Video Settings (Video)

    All manuals and user guides at all-guides.com Time Zone Mode for SET button Clock Set Top Box Control Select the time zone for your area, or select Select “Mode 1” or “Mode 2” if your cable box or “Auto” to have the recorder automatically set satellite receiver requires pressing an ENTER You can control your cable box/satellite receiver Auto (Auto Clock Set)

  • Page 25: Audio Settings (Audio)

    All manuals and user guides at all-guides.com Audio ATT (attenuation) If you connect a component that does not accept Audio Settings (Audio) the selected audio signal, a loud noise (or no If the playback sound is distorted, set this item to Dolby Normally select this Surround...

  • Page 26: Disc And Remote Control Settings/Factory Settings

    Command Mode. Be sure to match the Command Select “SETUP,” and press ENTER. Mode switch on the remote to the setting made here. For details, see “If you have a Sony DVD Select “Options,” and press ENTER. SETUP player or more than one Sony DVD recorder” on...

  • Page 27: Self-Diagnosis Function

    STOP. The disc tray does not open and “TRAY LOCKED” appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility. , continued • After playing, store the disc in its case.

  • Page 28: Specifications

    All manuals and user guides at all-guides.com Outputs Specifications Guide to Parts and Controls (Jack name: Jack type/output level/output impedance) LINE OUT 1/2 System For more information, see the pages in parentheses. (AUDIO): Phono jack/2 Vrms/10 kilohms Laser: Semiconductor laser (VIDEO): Phono jack/1.0 Vp-p Front panel Channel coverage:...

  • Page 29: Glossary

    All manuals and user guides at all-guides.com DVD-RW (page 8) Front panel display Glossary A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD- Chapter (page 58) RW has two different modes: VR mode and Video PLAYLIST STEREO mode.

  • Page 30: Cable Box/Satellite Receiver Brand Code

    0722, 0724 Trinity 1248 Skygiant 1091 McIntosh 0869 Tristar 0883 SL Marx 0040 Memorex 0724 0255, 0024, 1018, 0003, 0303 Sony 1006, 1506, 1606 Mitsubishi 0749 Tusa 0015 Spectradyne 0769, 0058 Motorola 0869 TV COMM 0035, 0019 Spectravision 0058 1270...
  • Page 31 Primestar 0361, 0627, 0869 Proscan 0392, 0566 1367 RadioShack 0869 0566, 0392, 0143, 0855 Samsung 1109, 1276 0856, 0099, 1856 Sony 0639, 1639 Star Choice 0869 Star Trak 0869, 0772 Thomson 0566, 0392 Tivo 1142, 1442 Toshiba 0790, 0749, 1749, 1285...
  • Page 32 All manuals and user guides at all-guides.com MEMO 1-26E...

  • Page 33: Disassembly

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. Upper case (Page 2-2) D.C. fan Power block RD-50 board (Page 2-4) (Page 2-4) (Page 2-3) Tray cover assembly (Page 2-5)

  • Page 34: Upper Case

    All manuals and user guides at all-guides.com NOTE: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE Two tapping screws Three tapping screws (+BV sumitite B3 × 10) 4 Upper case Two tapping screws...

  • Page 35: Board

    All manuals and user guides at all-guides.com 2-2. RD-50 BOARD 3 Flexible flat cable 4 Flexible flat cable (FRA- 6) (CN1903, 25P) (FRA- 3) (CN1101, 40P) 2 Flexible flat cable (FRA- 5) (CN1905, 13P) Separation plate 6 Four tapping screws (+BV3(3-CR) B3 ×...

  • Page 36: Fan

    All manuals and user guides at all-guides.com 2-3. D.C. FAN 3 Remove the D.C. fan in the direction of the arrow. Two tapping screws (+BV sumitite B3 × 10) 1 Connector (CN102, 3P) 2-4. POWER BLOCK 4 Six tapping screws (+BV3(3-CR) B3 ×...

  • Page 37: Tray Cover Assembly

    All manuals and user guides at all-guides.com 2-5. TRAY COVER ASSEMBLY Tray cover assembly HOW TO EXECUTE THE FOCED EJECTION The hole 3 Two claws Open the tray Insert the stiff wire in the hole and eject the tray.

  • Page 38: Dvd Drive

    All manuals and user guides at all-guides.com 2-6. DVD DRIVE 3 Four tapping screws (+BV3(3-CR) B3 × 8) 1 Remove the harness that is fixed on the clamp. Clamp 4 Remove the DVD section in the direction of the arrow A . 2 Harness (PD-122) (CN4, 4P) 5 Harness...

  • Page 39: Front Panel Section

    All manuals and user guides at all-guides.com 2-7. FRONT PANEL SECTION 1 Seven craws 2 Front panel section 2-8. DOOR 2 Door 1 Four craws...

  • Page 40: Board, Fl-141 Board

    All manuals and user guides at all-guides.com 2-9. FR-216 BOARD, FL-141 BOARD 7 Harness (AL-70) (CN105, 11P) 8 FL-141 board 6 Three tapping screws (+BV3(3-CR) B3 × 8) (CN102, 9P) (CN002, 9P) 2 Flexible flat cable (FAR-4) (CN001, 17P) 1 Flexible flat cable (FLR-4) 5 FR-216 board 4 Four...

  • Page 41: Board

    All manuals and user guides at all-guides.com 2-11. AV-84 BOARD 1 Harness (AL-070) (CN801, 11P) 2 Connector (CN3, 13P) 4 Seven tapping screws (+BV3(3-CR) B3 × 8) 3 Flexible flat cable (FRA- 4) (CN603, 17P) 7 Flexible flat cable (FRA- 4) (CN502, 13P) 8 Flexible flat cable 6 Flexible flat cable (FRA- 6) (CN503, 25P)

  • Page 42: Circuit Boards Location

    All manuals and user guides at all-guides.com 2-12. CIRCUIT BOARDS LOCATION Power block FL-141 board AV-84 board RD-50 board FR-216 board 2-10E...

  • Page 43: Block Diagrams

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/2) AV-82 BOARD (1/2) LINE 1 IN LINE 3 IN IC701 VIDEO IN SELECT TU VIDEO CVBS IN1 S VIDEO Q703 CN501(1/2) C IN3...

  • Page 44: Overall Block Diagram (2/2)

    All manuals and user guides at all-guides.com RDR-GX300 3-2. OVERALL BLOCK DIAGRAM (2/2) RD-46 BOARD CN-199 BOARD IC702 IC803 IC901 IC1101 (1/2) 512Fs 256Fs CN1101 CN1802 CN1801 AV ENCODER CN1904(1/2) OS 0 56-59 84,86,91 ENC DT 0 ATP D0 56-59...

  • Page 45: Power Block Diagram (1/3)

    All manuals and user guides at all-guides.com RDR-GX300 3-3. POWER BLOCK DIAGRAM (1/3) TU401 AV-82 BOARD Q415 3W REG CN101 UNSW 3.3V IC401 SW 3.3V IC404 Q414 UNSW 6V TU 5V POWER SW 12V BLOCK UNSW 12V UNSW -8V XP FAIL...

  • Page 46: Power Block Diagram (2/3)

    All manuals and user guides at all-guides.com RDR-GX300 3-4. POWER BLOCK DIAGRAM (2/3) CN103 CN1801 D1801 UNSW 6V UNSW 5V NOT USE IC1804 SW 5V SW 5V IC108 IC103 IC104 IC111 IC112 IC106 IC109 BUFFER EEP ROM BUFFER CLOCK 256Mbit SDRAM UNSW 3.3V...

  • Page 47: Power Block Diagram (3/3)

    All manuals and user guides at all-guides.com RDR-GX300 3-5. POWER BLOCK DIAGRAM (3/3) SWITCHING REGULATOR(POWER BLOCK) F101 3.15A/250V t101 P811 POWER Q811 D811 L812 L811 tRANSFORMER AC IN 16V REG P511 D511 L511 Q521 CN208 D211 L101,102 CN101 IC101 D311...
  • Page 48 All manuals and user guides at all-guides.com RDR-GX300 MEMO 3-12E...

  • Page 49: Schematic Diagrams

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 4 SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM TU401 VHF/UHF RD-50 BOARD AV-84 BOARD CN501 27P CN1904 27P AI_LRCK AI_LRCK AADXRST AADXRST AI_SDT AI_SDT TUNER DGND DGND AI_BCK AI_BCK DGND DGND DGND...

  • Page 50: Schematic Diagrams

    All manuals and user guides at all-guides.com RDR-GX300 4-2. SCHEMATIC DIAGRAMS WAVEFORMS AV-84 BOARD THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) IC603 0 IC802 ws •...

  • Page 51: Waveforms

    All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD (JL127) IC1702 34 IC103 Q1301 E 4.5 Vp-p 780 mVp-p 2.0 Vp-p 29.5 ns 30.3 ns IC1702 78 IC702 7 (S-VIDEO) Q1302 E 1.0 Vp-p 4.4 Vp-p 390 mVp-p 37.0 ns...
  • Page 52 All manuals and user guides at all-guides.com RDR-GX300 AV-84 BOARD(1/8) NO MARK:REC/PB MODE POWER R :REC MODE P :PB MODE -REF.NO.:10000 SERIES- CN101 JL101 JL102 JLxx UNSW18V JL103 SW3.3V SW3.3V JL104 UNSW6V TO(2/8) UNSW6V UNSW6V SWITCHING REGULATOR VIN_GND JL105 JL117...
  • Page 53 All manuals and user guides at all-guides.com RDR-GX300 AV-84 BOARD(2/8) NO MARK:REC/PB MODE AUDIO IN SIGNAL PATH R :REC MODE P :PB MODE REF.NO.:10000 SERIES- VIDEO SIGNAL AUDIO CHROMA Y/CHROMA SIGNAL AU1INR FA_INR R207 AU3INR AU3INL TO(7/8) C217 C209 C210...
  • Page 54 All manuals and user guides at all-guides.com RDR-GX300 SIGNAL PATH AV-84 BOARD(3/8) NO MARK:REC/PB MODE AUDIO OUT VIDEO SIGNAL AUDIO -REF.NO.:10000 SERIES- CHROMA Y/CHROMA SIGNAL CN503 JL515 SPDIFO JL529 DGND JL530 Rch+ R310 4700 RMUTE R320 ± JL531 0.5% 2200...
  • Page 55 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-4 for waveforms. IC404 AV-84 BOARD(4/8) IC404 TK11819MTL R5.2 TUNER 30V REG V-IN R4.7 VHF/UHF -REF.NO.:10000 SERIES- IN/OUT L406 R33.7 R32.0 V-OUT L411 NO MARK:REC/PB MODE...

  • Page 56: 5/8) (System Control)

    All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-4 for waveforms. AV-84 BOARD(5/8) SYSTEM CONTROL -REF.NO.:10000 SERIES- -8.9 -8.8 UNSW-8V Q607 R623 2SD1781K-T146-QR R637 -8.1 CN603 JL636 SW-8V C659 IT_GND R635 R634 R1693...
  • Page 57 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-4 for waveforms. AV-84 BOARD(6/8) NO MARK:REC/PB MODE VIDEO IN R :REC MODE P :PB MODE -REF.NO.:10000 SERIES- UNSW5V C711 Q702 SIGNAL PATH 0.1u R709...

  • Page 58: 7/8) (Video Out)

    All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-4 for waveforms. CN801 S2 SW L2_YCYIN Y2 IN AV-84 BOARD(7/8) AN GND VIDEO OUT L2_YCCIN C2 IN TO(6/8) AN GND -REF.NO.:10000 SERIES- FL-141 BOARD...
  • Page 59 All manuals and user guides at all-guides.com RDR-GX300 AV-84 BOARD(8/8) STB CONTROL R1132 -REF.NO.:10000 SERIES- D1101 Q1104 EC10DA40-TE12 2SB1561T100Q UNSW6V R1110 R1107 UNSW5V 2200 TO(1/8) C1103 IT_GND TU_GND C1102 IC1101 S3C80F9XKA-SO77 R1106 C1101 2200 0.01u P3.1/REM/ T0CK/SCLK C1104 P3.3/T0PWM/ JL1104...

  • Page 60: Relay)

    All manuals and user guides at all-guides.com RDR-GX300 CN-220 BOARD RELAY -REF.NO.:30000 SERIES- CN1801 CN1802 IDE_RST IDE_RST IDE_D7 IDE_D7 IDE_D8 IDE_D8 IDE_D6 IDE_D6 IDE_D9 IDE_D9 IDE_D5 IDE_D5 IDE_D10 IDE_D10 IDE_D4 IDE_D4 IDE_D11 IDE_D11 IDE_D3 IDE_D3 IDE_D12 IDE_D12 IDE_D2 IDE_D2 IDE_D13...

  • Page 61: Dv/Line 2 In/Fl Driver)

    All manuals and user guides at all-guides.com RDR-GX300 FL-141 BOARD ND101 FLUORESCENT INDICATOR TUBE LINE 2 IN/INDICATOR DRIVER -REF.NO.:40000 SERIES- NO MARK:REC/PB MODE 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28...

  • Page 62: Led Drive, Function Key

    All manuals and user guides at all-guides.com RDR-GX300 FR-216 BOARD LED DRIVE,FUNCTION KEY R051 R053 2200 -REF.NO.:40000 SERIES- Q002 R054 MSB709-RT1 4700 LEDIM Q001 C063 IC062 DTC114EKA-T146 0.01u Q001,002 LED B+ SWITCH CN001 JL008 JL007 LED DRIVE IT_GND JL009 FLCS...
  • Page 63 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(1/19) CONNECTOR -REF.NO.:20000 SERIES- DGND R1916 C1133 CN1904 TO(19/19) CN1101 40P JL1904 0.1u JL1167 AI_LRCK ADLRCKI SW3.3V C1131 C1132 JL1107 JL1910 C1130 0.1u 0.1u AADXRST R1901 0.1u DASP JL1906 JL1108 ATP_A3...

  • Page 64: 2/19) (Video Decoder)

    All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-5 for waveforms. RD-50 BOARD(2/19) VIDEO DECODER -REF.NO.:20000 SERIES- C730 C735 0.1u C733 0.1u JL710 VIDDT0 VIDDT0 C737 JL711 C731 0.1u VIDDT1 VIDDT1 JL712 VIDDT2...
  • Page 65 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(3/19) (4/19, (6/19, 5/19, AV GLUE (4/19,5/19, 11/19, TO(10/19) 6/19, (18/19) 6/19,8/19,15/19) 15/19) 12/19) -REF.NO.:20000 SERIES- SILNZCVB7 NO MARK:REC/PB MODE SILNZCVB7 R :REC MODE SILNZCVB6 SILNZCVB6 P :PB MODE SILNZCVB5 SILNZCVB5...
  • Page 66 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(4/19) AV ENCODER -REF.NO.:20000 SERIES- R931 NO MARK:REC/PB MODE XAVEWT R :REC MODE XAVERD P :PB MODE XAVECS TO(17/19) RB905 RB901 C912 RB904 C916 4700x4 33x4 33x4 0.1u XAVEWE 0.1u R935...
  • Page 67 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(5/19) :Voltage measurement of the CSP IC and the Transistors MR PROCESS NO MARK:REC/PB MODE with mark, is not possible. R :REC MODE -REF.NO.:20000 SERIES- P :PB MODE MRTRST MRTRST JTAGTMS...
  • Page 68 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-5 for waveforms. RD-50 BOARD(6/19) NO MARK:REC/PB MODE R :REC MODE AV DECODER P :PB MODE -REF.NO.:20000 SERIES- XSWARDA TO(5/19,15/19) XSWAWEA R1289 PLL27M1 XAVDINT TO(12/19)
  • Page 69 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(7/19) SDRAM -REF.NO.:20000 SERIES- NO MARK:REC/PB MODE R :REC MODE P :PB MODE AVDSDDTO AVDSDDTO AVDSDDT1 IC1203 AVDSDDT1 IC1203 HY57V641620HGT-P-TR-V AVDSDDT2 AVDSDDT2 AVDSDDT3 64M SDRAM AVDSDDT3 R2.5/P1.7 AVDSDDT4 AVDSDDT0 AVDSDDT15 AVDSDDT4...
  • Page 70 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-5 for waveforms. RV001 R4349 RD-50 BOARD(8/19) R1304 NO MARK:REC/PB MODE :Voltage measurement of the CSP IC 2200 R1301 2200 and the Transistors with mark,is NAZCA not possible.
  • Page 71 All manuals and user guides at all-guides.com RDR-GX300 IC1304 IC1305 RD-50 BOARD(9/19) SDRAM SDRAM SDRAM IC1304 IC1305 -REF.NO.:20000 SERIES- MT48LC2M32B2 MT48LC2M32B2 RB1327 RB1319 RB1323 RB1331 NO MARK:REC/PB MODE SDR_DQ32 47x4 47x4 47x4 47x4 SDR_DQ0 SDR_DQ47 SDR_DQ15 DQ15 DQ15 VDDQ VSSQ...
  • Page 72 All manuals and user guides at all-guides.com RDR-GX300 IC1601 R1604 2ch DAC XAMUTE XLMUTE RD-50 BOARD(10/19) SIGNAL PATH IC1601 AK4381VT-E2 D1601 1SS355TE-17 AUDY,DAC PLL512L2 MCLK DZFL AUDIO DABCKO -REF.NO.:20000 SERIES- BICK DZFR SIGNAL SDTI DALRCKO NO MARK:REC/PB MODE LRCK R1603...

  • Page 73: 11/19) (Jtag)

    All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(11/19) NO MARK:REC/PB MODE JTAG -REF.NO.:20000 SERIES- JL1406 SILTDO JL1407 MRTDO JL1408 TO(3/19) JTAGTCK JL1409 JTAGTMS JL1410 JTAGTRST JL1411 MRTDO SIGNAL PATH JL1412 AUDTDO JL1413 TO(5/19) JTAGTCK JL1414 AUDIO JTAGTMS JL1415...
  • Page 74 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-5, 4-6 for waveforms. :Voltage measurement of the CSP IC and the Transistors with mark,is RD-50 BOARD(12/19) not possible. EPG_SCL EPG_SCL EPG_SDA EPG_SDA NO MARK:REC/PB MODE...
  • Page 75 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(13/19) IC108 SDRAM,NAND FLASH -REF.NO.:20000 SERIES- 256M SDRAM NO MARK:REC/PB MODE R :REC MODE P :PB MODE IC108 MT48LC16M16A2P-75-Y16Y SHHA2 SHHA2 SHHA3 SHHA3 SHHD0 SHHD15 DQ15 SHHA4 SHHA4 VCCQ VSSQ IC402...
  • Page 76 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(14/19) NO MARK:REC/PB MODE SWA/UNSW BUFFER-1 SWAHD0 SWAHD0 -REF.NO.:20000 SERIES- SWAHD1 RB301 RB303 SWAHD1 IC304 10kx4 10kx4 IC303 SWAHD2 SN74LVC16245ADGGR SN74LVC16245ADGGR SWAHD2 SHHD0 RB316 SHHD0 RB314 10kx4 SWAHD3 10kx4 SWAHD3 SHHD1...
  • Page 77 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(15/19) SWA/UNSW BUFFER-2 -REF.NO.:20000 SERIES- NO MARK:REC/PB MODE R :REC MODE IC308 IC301 IC305 IC308 P :PB MODE SN74LVC16244ADGGR IC301 IC305 SN74LVC16244ADGGR SN74LVC16244ADGGR SHHA2 SHHA2 RB332 UNSW BUFFER 10kx4 SHHA3 2OE2...
  • Page 78 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(16/19) FLASH ROM UNHA18 -REF.NO.:20000 SERIES- IC201 NO MARK:REC/PB MODE MBM29Z0003PCN-KE1 IC201 R :REC MODE P :PB MODE UNHD0 UNHA24 128M FLASH UNHD0 UNHD1 UNHA17 UNHD1 UNHD2 UNHA16 UNHD2 BYTE UNHD3...
  • Page 79 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(17/19) GPS3(HOST GLUE) -REF.NO.:20000 SERIES- NO MARK:REC/PB MODE R :REC MODE P :PB MODE XSILCS XSILCS XSILWT XSILWT TO(3/19) XSILINT R587 XSILINT XSWGT2 R583 R580 XSWGT2 R598 TO(15/19) XNZCCS XSWGT0 XNZCCS...
  • Page 80 All manuals and user guides at all-guides.com RDR-GX300 For Schematic Diagram • Refer to page 4-5, 4-6 for waveforms. IC1703 RD-50 BOARD(18/19) IC1701 512FS BUFFER 27M BUFFER -REF.NO.:20000 SERIES- IC1701 IC1703 C1709 SN74LVC08APWR SN74LVC08APWR 0.1u NO MARK:REC/PB MODE R :REC MODE...
  • Page 81 All manuals and user guides at all-guides.com RDR-GX300 RD-50 BOARD(19/19) IC1804 NO MARK:REC/PB MODE POWER R :REC MODE 5V REG P :PB MODE -REF.NO.:20000 SERIES- R5.9 P1.0 CN1801 FL1801 JL1813 FB1801 JL1802 UNSW5V UNSW6V SW3.3V SW3.3V TO(1/19,2/19, D1801 AGND EC10DA40-TE12...
  • Page 82 All manuals and user guides at all-guides.com RDR-GX300 SWITCHING REGULATOR (SRV1469UC) P301 POWER SUPPLY C112 T101 -REF.NO.:30000 SERIES 1000p Q303 Q301 POWER TRANSFORMER L301 2SJ438 R305 2SJ525 10uH 12V REG SW12V REG SW12V D301 R301 R307 S3L20u D303 HDD DISK 1.5k...

  • Page 83: Ic Pin Function Description

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC603: M603H2MC-511FPUO (AV-84 BOARD)) Pin No. Pin Name Function TU_S/B_D Tuner Stereo detection L: Stereo SIRCS IN Remote control signal input JUSTCLK...
  • Page 84 All manuals and user guides at all-guides.com Pin No. Pin Name Function TXT_EN SYNC_C_SW Fixed to digital GND SYNC_S/V_SW LIS/V switching signal while waiting for synchronized recording Analog power 6 V TU_FMONO Forced monaural signal output / clock adjustment 1 KHz output RESET_5V RESET 5 V signal output IT_XRESET...
  • Page 85 All manuals and user guides at all-guides.com Pin No. Pin Name Function KEY5 – Not used BS_C/N_DET BSC / N detection (MAX: 2.9 V normal signal: 2.2 V) AVSS – Analog GND TU_GAIN_MAX Tuner AGC input VREF – Analog power 5 V AVCC –...
  • Page 86 All manuals and user guides at all-guides.com MEMO 5-4E...

  • Page 87: Board))

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 6 SERVICE MODE This is the diagnostics to define the faulty position. The diagnostics can be executed using the remote commander (Remote Control Mode 3) and monitor. To execute the service mode, connect the VIDEO OUT (L2 OUT) connector to the monitor.

  • Page 88: Screen Transition In The Service Mode

    All manuals and user guides at all-guides.com 6-2. Screen Transition in the Service Mode Main menu DEVICE TEST menu DEVICE TEST menu << MAIN MENU >> << DEVICE TEST MENU 1/2 >> << DEVICE TEST MENU 2/2 >> 1) DEVICE TEST 0) AUTO CHECK 1) NAND FLASH 2) PATH TEST...

  • Page 89: Service Mode Menu Items And Description

    All manuals and user guides at all-guides.com 6-3. Service Mode Menu Items and Description << MAIN MENU >> When the key “1” is pressed down, the monitor display moves 1) DEVICE TEST to the device check menu screen. 2) PATH TEST When the key “2”...

  • Page 90: Path Check Menu (1/2)

    All manuals and user guides at all-guides.com 6-6. Path Check Menu (1/2) << PATH TEST MENU 1/2 >> 1) When the key “0” is pressed down, the path check is 0) AUTO CHECK automatically executed. 1) NAZCA 2) When the key “1” is pressed down, the NAZCA path check is executed.

  • Page 91: Device Auto Check Screen Transition

    All manuals and user guides at all-guides.com 6-9. Device AUTO Check Screen Transition << DEVICE TEST MENU 1/2 >> Select the item of AUTO CHECK from menu. 0) AUTO CHECK Device check is executed automatically, from no.1 in numeric order. When all devices are checked, number of OK/NG items and names of the NG devices are displayed as the RESULT.

  • Page 92: Path Individual Check (Pasted Screen Check (Visual Check) And Data Check (Digital Video Data Auto-Check) )

    All manuals and user guides at all-guides.com 6-11. Path Individual Check << PATH TEST MENU 1/2 >> (Pasted Screen Check (visual check) and data check (digital video data auto-check) ) 1) NAZCA Screen Transition 1) Select the NAZCA item from the menu. ·...

  • Page 93: Adjustment

    All manuals and user guides at all-guides.com RDR-GX300 SECTION 7 ADJUSTMENT 2. S-Video Output S-Y Check 7-1. Video System Adjustment <Purpose> This check confirms that the S-video output. If it adjusted incorrectly, Preparing for Adjustment color will be to dark or too thin.

  • Page 94: S-Video Output S-C Level Check

    All manuals and user guides at all-guides.com 3. S-Video Output S-C Level Check 5. Component Video Output B-Y Chec <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video NTSC standard.

  • Page 95: Repair Parts List

    Ref. No. Part No. Description Remarks X-2021-258-1 COVER ASSY, TRAY 1-827-794-11 CABLE, FLEXIBLE FLAT (FRA-6) 3-066-225-11 SONY BADGE (5-A) 1-829-256-11 CABLE, FLEXIBLE FLAT (FRA-5) A-1055-246-A PANEL BLOCK ASSY, FRONT 1-829-221-11 CABLE, FLEXIBLE FLAT (FRA-7) 3-070-883-41 SCREW, TAPPING 1-478-722-11 REMOTE COMMANDER (RMT-D205A)

  • Page 96: Dvd Drive

    All manuals and user guides at all-guides.com 8-1-2. DVD DRIVE supplied supplied Chassis block (See page 8-3) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-088-023-01 +B3 (3-CR) 8-457-599-50 DRIVE, DVD DW-U15A-S2 3-077-331-01 +BV3 (3-CR) 1-827-795-11 CABLE, FLEXIBLE FLAT (FRD-3) 4-662-796-01 CLIP, COACHING...

  • Page 97: Chassis Block

    All manuals and user guides at all-guides.com 8-1-3. CHASSIS BLOCK supplied supplied supplied supplied supplied 115 103 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks O 102 A-1056-648-A FR-216 (UB) COMPL O 109 A-1056-644-A AV-84 (UB) COMPL 3-077-331-01 +BV3 (3-CR) 1-787-118-11 FAN, D.C.

  • Page 98: Electrical Parts List

    All manuals and user guides at all-guides.com AV-84 8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name. specified in the diagrams or the components •...
  • Page 99 All manuals and user guides at all-guides.com AV-84 C617 1-165-176-11 CERAMIC CHIP 0.047uF 10.00% 16V C805 1-162-970-11 CERAMIC CHIP 0.01uF 10.00% 25V C618 1-162-970-11 CERAMIC CHIP 0.01uF 10.00% 25V C806 1-162-970-11 CERAMIC CHIP 0.01uF 10.00% 25V C620 1-162-920-11 CERAMIC CHIP 27PF 5.00% 50V C809...
  • Page 100 Remarks IC607 8-759-242-70 IC TC7WU04F(TE12R) Q607 8-729-921-73 TRANSISTOR 2SD1781K-T146-QR IC701 6-705-005-01 IC LA73031V-TLM-E Q701 8-729-024-88 TRANSISTOR MUN2212T1 IC801 8-759-667-17 IC L79M05TLL-SONY-TL-E Q702 8-729-045-17 TRANSISTOR 2SB1561T100Q IC802 6-704-839-01 IC LA73056-TLM-E Q703 8-729-010-05 TRANSISTOR MSB709-RT1 IC1101 6-804-428-01 IC S3C80F9XKA-SO77 Q704 8-729-010-05 TRANSISTOR MSB709-RT1 <...
  • Page 101 All manuals and user guides at all-guides.com AV-84 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R308 1-216-845-11 METAL CHIP 100K 1/10W R479 1-216-837-11 METAL CHIP 1/10W R309 1-216-830-11 METAL CHIP 5.6K 1/10W R480 1-216-864-11 SHORT CHIP R310 1-218-863-11 METAL CHIP 4.7K...
  • Page 102 All manuals and user guides at all-guides.com AV-84 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R679 1-216-817-11 METAL CHIP 1/10W R859 1-216-022-11 RES-CHIP 1/10W R680 1-216-809-11 METAL CHIP 1/10W R860 1-216-022-11 RES-CHIP 1/10W R685 1-216-817-11 METAL CHIP 1/10W R861 1-216-022-11 RES-CHIP...
  • Page 103 All manuals and user guides at all-guides.com AV-84 CN-199 FL-141 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1654 1-216-864-11 SHORT CHIP CN-199 (J) COMPL (NOT SUPPLIED) R1655 1-216-833-11 METAL CHIP 1/10W ***************************** R1656 1-216-864-11 SHORT CHIP R1657 1-216-864-11 SHORT CHIP CN1801 1-818-021-11 PIN, CONNECTOR 40P...
  • Page 104 All manuals and user guides at all-guides.com FL-141 FR-216 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks JR106 1-216-296-11 SHORT CHIP A-1056-648-A FR-216 (UB) COMPL JR107 1-216-296-11 SHORT CHIP **************** JR108 1-216-295-91 SHORT CHIP JR109 1-216-295-91 SHORT CHIP <...
  • Page 105 All manuals and user guides at all-guides.com FR-216 POWER BLOCK Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < TRANSISTOR > < CONNECTOR > Q001 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q002 8-729-010-05 TRANSISTOR MSB709-RT1 1-778-318-21 CONNECTOR < RESISTOR > <...
  • Page 106 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C340 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V C341 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V A-1070-809-A RD-50 (UBS) COMPL (REUSE) C342 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V...
  • Page 107 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C733 1-162-915-11 CERAMIC CHIP 10PF 0.50PF 50V C1116 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C734 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V C1117 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 108 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C1330 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V C1711 1-162-916-11 CERAMIC CHIP 12PF 5.00% 50V C1332 1-107-826-11 CERAMIC CHIP 0.1uF 10.00% 16V C1712 1-162-916-11 CERAMIC CHIP 12PF...
  • Page 109 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > IC1704 8-759-679-55 IC SN74LVC08APWR IC1802 6-705-292-01 IC PQ018EH02ZPH IC103 6-705-379-01 IC HD6417306BL200V IC1803 6-704-923-01 IC PQ015EZ01ZPH IC104 8-759-573-97 IC SN74LVC541APWR IC1804 6-703-756-01 IC PQ1L503M2SPQ...
  • Page 110 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R182 1-218-965-11 RES-CHIP 1/16W R503 1-218-965-11 RES-CHIP 1/16W R183 1-218-965-11 RES-CHIP 1/16W R504 1-218-965-11 RES-CHIP 1/16W R184 1-218-965-11 RES-CHIP 1/16W R510 1-218-965-11 RES-CHIP 1/16W...
  • Page 111 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R829 1-218-935-11 RES-CHIP 1/16W R1168 1-218-965-11 RES-CHIP 1/16W R830 1-218-935-11 RES-CHIP 1/16W R1169 1-218-962-11 RES-CHIP 5.6K 1/16W R831 1-218-935-11 RES-CHIP 1/16W R1170 1-218-935-11 RES-CHIP...
  • Page 112 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1340 1-218-965-11 RES-CHIP 1/16W R1738 1-218-961-11 RES-CHIP 4.7K 1/16W R1341 1-218-958-11 METAL CHIP 2.7K 0.50% 1/16W R1739 1-218-938-11 RES-CHIP 1/16W R1342 1-218-958-11 METAL CHIP 2.7K...
  • Page 113 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3160 1-218-961-11 RES-CHIP 4.7K 1/16W R3272 1-218-965-11 RES-CHIP 1/16W R3163 1-218-938-11 RES-CHIP 1/16W R3273 1-218-965-11 RES-CHIP 1/16W R3165 1-218-938-11 RES-CHIP 1/16W R3274 1-218-965-11 RES-CHIP...
  • Page 114 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R4320 1-218-937-11 RES-CHIP 1/16W RB310 1-234-714-11 RES, NETWORK 56X4 (1005) R4321 1-218-937-11 RES-CHIP 1/16W RB311 1-234-714-11 RES, NETWORK 56X4 (1005) R4322 1-218-937-11 RES-CHIP 1/16W...
  • Page 115 All manuals and user guides at all-guides.com RD-50 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB905 1-242-963-21 RES, NETWORK 33X4 (1005) ACCESSORIES RB906 1-234-378-21 RES, NETWORK 10KX4 (1005) ************ RB1101 1-242-963-21 RES, NETWORK 33X4 (1005) RB1102 1-242-963-21 RES, NETWORK 33X4 (1005) 2-024-212-11 MANUAL, INSTRUCTION (ENGLISH)
  • Page 116 All manuals and user guides at all-guides.com MEMO 8-22E...
  • Page 117 All manuals and user guides at all-guides.com RDR-GX300 Sony Corporation 2004G1600-1 Home Electronics Network Company 9-874-819-11 ©2004.7 — 156 — Published by Quality Assurance Dept.

Table of Contents