Replacement Procedures
4.12 Cover assembly
Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-19 to
4-21).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
• M2.5×6.0
• M2.5×6.0B
• M2.5x4.0
Touchpad FFC
Figure 4-19 Removing the screws cable from connect (front)
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 44
FLAT BIND screw Front
FLAT BIND screw Back
FLAT BIND screw
Top LENS
x3
x18
x1
Front 2.5*6 x3
Fingerprint