D-Link DCS-6513 User Manual
Full hd wdr day & night outdoor dome network camera
Hide thumbs
Also See for DCS-6513:
- User manual (75 pages) ,
- Quick install manual (17 pages) ,
- Features & specifications (4 pages)
Related Manuals for D-Link DCS-6513
Summary of Contents for D-Link DCS-6513
-
Page 1: User Manual
Version 1.0 | February 25, 2013 User Manual Full HD WDR Day & Night Outdoor Dome Network Camera DCS-6513... -
Page 2: Manual Revisions
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. -
Page 3: Table Of Contents
Using the Configuration Interface ........30 Safety Statements ..............75 Live Video ................31 Contacting Technical Support ..........77 Setup ..................33 Warranty ..................78 Setup Wizard ..............33 Registration ..................85 Network Setup ..............39 Dynamic DNS ..............42 Image Setup ..............43 Audio and Video ..............45 D-Link DCS-6513 User Manual... -
Page 4: Product Overview
Section 1: Product Overview Product Overview Package Contents DCS-6513 Full HD WDR Day & Weather Shield Night Outdoor Dome Network Camera Power adapter 37mm Screws for Weather Shield CD-ROM with User Manual and software Cable Cover Extension Adapter Rubber Plug... -
Page 5: Introduction
The DCS-6513 has an IP67 certified weatherproof housing designed for both indoor and outdoor applications. The built-in removable IR-cut filter and IR LEDs gives the DCS-6513 the capability to view up to 60 feet at night. The DCS-6513 also incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling. -
Page 6: Features
The DCS-6513 monitors and automatically regulates its temperature to ensure optimal performance even in extreme conditions. It balances fan use against a built in heater based on a range of preset thermostatic settings. This gives the DCS-6513 the ability to perform in the most demanding of environments. -
Page 7: Hardware Overview
Infrared LEDs illuminate the camera's field of view at night Power/Status LED Indicates the camera's current status The camera is housed in an IP67 certified weatherproof casing, which protects Protective Casing it against rain and dust. This case is also IK10 certified vandal-resistant. D-Link DCS-6513 User Manual... -
Page 8: Cable Harness
Connects to a speaker. DI/DO Connector I/O connectors for external devices. 12V DC output. Reset Button Press and hold the recessed button for ten seconds to reset the camera. 24V Power Connector Connects to 24V AC power supply. D-Link DCS-6513 User Manual... -
Page 9: Internal
To camera. eject the SD card, push the SD card into the slot. SD Card Slot Insert an SD card for local storage of recorded images and video D-Link DCS-6513 User Manual... -
Page 10: Mounting
6. Drill four separate 6mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes. 7. Attach the surface bracket to the ceiling using the screws provided. Figure 2.1 D-Link DCS-6513 User Manual... - Page 11 (Figure 2.2) 2. Push the dome body up over the base of the camera. 3. Attach the dome to the base of the camera using the three long screws and the provided security screw. Figure 2.2 D-Link DCS-6513 User Manual...
-
Page 12: Style 2 - Exposed Cable Installation
Exposed Cable Installation Style 2 - Exposed Cable Installation 1. Disassemble the camera enclosure (see page 9). 2. Remove the small screw to release the faceplate on the side of the base of the camera. Figure 2.3 D-Link DCS-6513 User Manual... - Page 13 3. Thread the cables through the waterproof plugs on the side of the base of the camera. Attach the cables to the corresponding cable connectors (see page 10). Figure 2.4 4. Attach the dual-holed plate to the base of the camera. (Figure 2.4) D-Link DCS-6513 User Manual...
- Page 14 5. Attach the surface bracket to the ceiling using the screws provided. 6. Place the dome body onto the base of the camera. (Figure 2.6) 7. Attach the dome to the base of the camera using the three long screws and the provided security screw. Figure 2.6 D-Link DCS-6513 User Manual...
-
Page 15: Pendant Mount
8. Insert the screw into the base of the pendant bracket at the top of the bracket cap to secure the bracket cap into place. Pendant Bracket Bracket Figure 3.2 D-Link DCS-6513 User Manual... - Page 16 Section 2: Assembly and Installation 1. Connect the Ethernet cable and the power cable, then thread them through the pendant bracket. 2. Place the dome body onto the base of the camera. (Figure 3.3) Figure 3.3 D-Link DCS-6513 User Manual...
- Page 17 Section 2: Assembly and Installation 1. Attach the dome to the base of the camera using the three long screws and the provided security screw. D-Link DCS-6513 User Manual...
-
Page 18: Wall Mount
8. Insert the screw into the base of the wall mount bracket at the top of the bracket cap to secure the bracket cap into place. Bracket Cap 9. Connect the Ethernet cable and the power cable and thread them through the wall mount bracket. Figure 4.2 D-Link DCS-6513 User Manual... - Page 19 10. Place the dome body onto the base of the camera. (Figure 4.3) 11. Attach the dome to the base of the camera using the three long screws and the provided security screw. Wall Mount Figure 4.3 Dome Camera Figure 4.4 D-Link DCS-6513 User Manual...
-
Page 20: Weather Shield Installation
Weather Shield Installation The DCS-6513 comes with an optional weather shield to protect your network camera against damage from adverse weather. If you are installing the DCS-6513 in a location where it will be exposed to harsh weather, it is recommended that you install the weather shield. - Page 21 Section 2: Assembly and Installation Connection Using 12V DC Power Adapter 1. Connect the network camera to a switch via an Ethernet cable. 2. Connect the supplied power cable from the camera to a power outlet. D-Link DCS-6513 User Manual...
- Page 22 Section 2: Assembly and Installation Connection Using 24V AC Power Wiring 1. Connect the network camera to a switch using an Ethernet cable. 2. Connect the supplied power cable from the camera to a power source. D-Link DCS-6513 User Manual...
- Page 23 Connection with a PoE Switch 1. If you are using a PoE switch, connect the IP camera to the switch via an Ethernet cable, which will provide transmission of both power and data over a single cable. D-Link DCS-6513 User Manual...
-
Page 24: Adjusting The Lens 3-Axis Gimbal
Tighten the tilt screws once completed. Turn the lens to adjust the IP camera’s image until the desired orientation is achieved and then tighten the image adjustment screw once completed. D-Link DCS-6513 User Manual... -
Page 25: Software Installation
Accept the End User Licence Agreement and follow the on-screen prompts to install the camera. Step 4 Select your camera from the list and then click Wizard. If you have multiple cameras, you can identify them by the MAC ID printed on the label on the back of your camera. D-Link DCS-6513 User Manual... - Page 26 Select Static IP if you want to manually enter the network settings of your camera or DHCP if you want your router or DHCP server to automatically assign the camera its network settings. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. Click Next to continue. D-Link DCS-6513 User Manual...
- Page 27 Section 2: Assembly and Installation Step 7 Confirm your camera's settings and click Restart. The LED on the front of the DCS-6513 will blink and then turn solid green once it successfully connects to your network. Step 8 Your DCS-6513 camera is now set up. Click Exit to exit the wizard. You can skip to "Configuration"...
-
Page 28: D-Viewcam Setup Wizard
D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. - Page 29 Section 2: Assembly and Installation Step 3 Click Finish to complete the installation. Step 4 To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. Step 5 For more detailed operation of using D-ViewCam software, please refer to the D-ViewCam manual.
-
Page 30: Configuration
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-6513. At the end of the Wizard, click Link, or enter the IP address of your camera into a web browser such as Firefox. -
Page 31: Live Video
Stops the camera ePTZ motion Preset Path Starts the camera's motion along the predefined path ePTZ Speed: You may select a value between 0 and 10, where 1 is the slowe st and 10 is the fastest. D-Link DCS-6513 User Manual... - Page 32 Listen/Stop Audio In (from microphone) Full screen mode Start/Stop Audio Out (to speaker) Take a Snapshot Start/Stop Digital Output Go To: If any presets have been defined, selecting a preset from this list will (Preset List) display it. D-Link DCS-6513 User Manual...
-
Page 33: Setup
To quickly configure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to "Motion Detection" on page D-Link DCS-6513 User Manual... -
Page 34: Internet Connection Setup Wizard
Section 3: Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Note: Only use this wizard if you are connecting the Camera directly to a broadband modem or a switch with multiple accounts from your ISP. - Page 35 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-6513 User Manual...
- Page 36 Configure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. Verify that the settings are correct and click Apply to save them. The settings will be saved to the DCS-6513 and the camera will restart. D-Link DCS-6513 User Manual...
-
Page 37: Motion Detection Setup Wizard
Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. D-Link DCS-6513 User Manual... - Page 38 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-6513 User Manual...
-
Page 39: Network Setup
Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. D-Link DCS-6513 User Manual... - Page 40 PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of your camera. D-Link DCS-6513 User Manual...
- Page 41 IP address, specify an optional router and an optional primary DNS. The DCS-6513 allows you to multicast each of the Enable Multicast for stream available streams via group address and specify the TTL value for each stream.
-
Page 42: Dynamic Dns
DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-6513 User Manual... -
Page 43: Image Setup
The Low Noise option will focus on creating a high- quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. D-Link DCS-6513 User Manual... - Page 44 WDR Level: Specify a value from 0 to 10 to specify how much WDR to apply to the image, or select None. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-6513 User Manual...
-
Page 45: Audio And Video
Maximum frame rate: A higher frame rate provides smoother motion for videos, but requires more bandwidth. Lower frame rates will result in stuttering motion, however, they will require less bandwidth. D-Link DCS-6513 User Manual... - Page 46 This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off: Selecting this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-6513 User Manual...
-
Page 47: Lens Control
Zoom Control Use the slider control to fine tune the camera zoom. Focus Control Use the slider control to fine tune the camera focus. Fine Tune Focus automatically: Allow the camera to adjust the focus automatically. D-Link DCS-6513 User Manual... -
Page 48: Preset
Clicking the Remove button will delete the currently selected preset. Preset Sequence: This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views. D-Link DCS-6513 User Manual... - Page 49 Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-6513 User Manual...
-
Page 50: Motion Detection
Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-6513 User Manual... -
Page 51: Time And Date
Enable this feature to obtain time automatically from an NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-6513 with an Internet time server. Choose the one that is closest to your location. Set the Date and Time Manually: This option allows you to set the time and date manually. -
Page 52: Event Setup
Event Setup In a typical application, when motion is detected, the DCS-6513 sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by various sources, such as motion detection. When an event is triggered, a specified action will be performed. - Page 53 1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the fields accordingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. D-Link DCS-6513 User Manual...
-
Page 54: Add Server
Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-6513 User Manual... -
Page 55: Add Media
9 images are generated after a trigger is activated. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. The moment the trigger is activated. D-Link DCS-6513 User Manual... - Page 56 Set the maximum file size to record for your video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-6513 User Manual...
-
Page 57: Add Event
Triggers an event when the system boots up. Network Lost: Triggers an event when the network connection is lost. Time: Select Always or enter the time interval. Server: Specify the location where the event information should be saved to. D-Link DCS-6513 User Manual... -
Page 58: Add Recording
Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space. It is advised not to save other files in the same folder as recording files. D-Link DCS-6513 User Manual... - Page 59 Time of each file for recording: If this is selected, files will be separated based on the maximum length you specify. File Name Prefix: The prefix name will be added on the file name of the recording file(s). D-Link DCS-6513 User Manual...
-
Page 60: Sd Card
Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-6513 User Manual... -
Page 61: Advanced
N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed." Video Output: Enable/ disable the BNC terminal TV output signal. D-Link DCS-6513 User Manual... -
Page 62: Icr And Ir
The IR light will always be on. Sync: The IR light will turn on when the ICR sensor is on. Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-6513 User Manual... -
Page 63: Https
Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-6513 User Manual... -
Page 64: Access List
Section 3: Configuration Access List Here you can set access permissions for users to view your DCS-6513. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. -
Page 65: Maintenance
Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-6513 User Manual... -
Page 66: System
Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-6513 User Manual... -
Page 67: Firmware Upgrade
Section 3: Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-6513, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. -
Page 68: Status
Section 3: Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-6513 User Manual... -
Page 69: Logs
Section 3: Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-6513 User Manual... -
Page 70: Help
Section 3: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-6513 User Manual... -
Page 71: Di/Do Specifications
Section 4: DI/DO Specifications DI/DO Specifications D-Link DCS-6513 User Manual... -
Page 72: Technical Specifications
ƒ NTP client (D-Link) ƒ QoS ƒ DNS client ƒ CoS ƒ DDNS client (D-Link) ƒ Multicast ƒ SMTP client ƒ ONVIF compliant ƒ FTP client Security Administrator and user group protection HTTP and RTSP digest encryption Password authentication D-Link DCS-6513 User Manual... - Page 73 Operating: -40 to 50 °C (-40 to 122 °F) Storage: -20° to 70° C (-4° to 158° F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certifications CE LVD C-Tick Optional DCS-34-2 Pendant Mount DCS-34-3 Bent Arm Mount Accessories D-Link DCS-6513 User Manual...
- Page 74 Appendix A: Technical Specifications Dimensions D-Link DCS-6513 User Manual...
-
Page 75: Safety Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. D-Link DCS-6513 User Manual... - Page 76 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
-
Page 77: Contacting Technical Support
• Hardware Revision (located on the label on the bottom of the camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. -
Page 78: Warranty
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. - Page 79 D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
- Page 80 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
- Page 81 Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.
- Page 82 Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.
- Page 83 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DCS-6513 User Manual...
-
Page 84: Industry Canada Statement
Appendix D: Warranty For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 85: Registration
Appendix E: Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 February 25, 2013 D-Link DCS-6513 User Manual...