hit counter code
Bosch DIP-7080-00N Installation Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security System
  5. DIVAR DIP-7080-00N
  6. Installation manual

Bosch DIP-7080-00N Installation Manual

Divar ip 7000 2u
Hide thumbs Also See for DIP-7080-00N:
Table of Contents

Advertisement

Quick Links

DIVAR IP 7000 2U
DIP-7080-00N, DIP-7082-8HD
en
Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch DIP-7080-00N

Summary of Contents for Bosch DIP-7080-00N

  • Page 1 DIVAR IP 7000 2U DIP-7080-00N, DIP-7082-8HD Installation Manual...

  • Page 3: Table Of Contents

    General system precautions 4.2.4 Rack mounting considerations Rack mounting instructions 4.3.1 Separating the sections of the rack rails 4.3.2 Installing the inner rails 4.3.3 Installing the outer rails to the rack Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 4 Turning on the system System setup - first steps Introduction Setup instruction Starting the Appliccation Using Configuration Wizard Using Bosch VMS Configuration Client Using Bosch VMS Operator Client Recovering the unit System recovery options RAID disaster recovery 6.2.1 Multiple disks failed – theory 6.2.2...

  • Page 5: Safety Precautions

    AC adaptors. Using any other cables and adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL or CSA-certified cables (that have UL/CSA shown on the code) for any other electrical devices. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 6: Electrical Safety Precautions

    Installation should only be carried out by qualified customer service personnel in accordance with the applicable electrical regulations. Disposal Your Bosch product has been developed and manufactured using high- quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.

  • Page 7: Esd Precautions

    The chassis cover must be in place when the system is operating to assure proper cooling. Out of warranty damage to the system can occur if this practice is not strictly followed. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 8: Important Notices

    Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 9: System Overview

    Running the full Bosch VMS (Video Management System) solution and powered by Bosch VRM (Video Recording Manager) software, the DIVAR IP 7000 is an intelligent IP storage device that eliminates the need for separate NVR (Network Video Recorder) server and storage hardware.

  • Page 10: Chassis

    System interface There are several LEDs on the front and rear of the chassis. The LEDs show the over-all status of the system and the activity and health of specific components. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 11: Control Panel Buttons

    Control panel buttons There are two push-buttons located on the front of the chassis. These are (in order from left to right) a reset button and a power on/off button. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 12: Control Panel Leds

    Power: Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 2.3.3 Drive carrier LEDs Your chassis uses SAS/SATA. SAS/SATA drives Each SAS/SATA drive carrier has two LEDs. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 13 LED to blink on and off when that particular drive is being accessed. – Red: The red LED indicates a SAS/SATA drive failure. If one of the SAS/SATA drives fail, you should be notified by your system management software. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 14: Chassis Setup And Maintenance

    Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 15: Installing Hard Drives

    Use the handle to pull the drive out of the chassis. Notice! Except for short periods of time (swapping hard drives), do not operate the unit with the hard drives removed from the bays. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 16: Installing A Hard Drive

    Secure the hard drive by tightening all 6 screws. Drive carrier SAS/SATA hard drive Replace the drive carrier into the chassis bay. Make sure that the drive carrier handle is completely closed. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 17: Installing A Fixed Hard Drive

    Chassis setup and maintenance | en Notice! We recommend using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. HDD – not delivered from Bosch – are not supported. Information on supported HDDs can be found in the datasheet in the Bosch Online Product Catalog.

  • Page 18: Replacing Or Installing A Dvd-Rw

    The chassis model includes an internal USB transcoder device. Notice! To replace or install the transcoder device, please apply to one of the Bosch RMA helpdesks. Replacing or installing the front port panel The chassis model includes a front port panel.

  • Page 19: Installing The Motherboard

    Motherboard problems will be handled by trained support people only. Installing the air shroud Air shrouds concentrate airflow to maximize fan efficiency. The air shroud does not require screws to set up. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 20: Checking The Air Flow

    Rack installation, page 24. 3.10 Replacing the system fans The system fans provide cooling for the chassis. These fans circulate air through the chassis as a means of lowering the chassis internal temperature. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 21: Power Supply

    The chassis has two redundant power supplies. The power supplies are auto-switching capable. This enables the power supplies to automatically sense and operate at a 100 V to 240 V input voltage. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 22: Replacing The Power Supply

    Replacing the power supply The power supply can be replaced without turning off the system if a redundant power supply is available. Replacement units can be ordered directly from Bosch RMA desk. To replace the power supply: Only for units with one power supply: Turn off the unit and unplug the power cord.

  • Page 23: Replacing The Power Distributor

    Slide the new power distributor module into the power distributor housing. Make that you slide the cables through the bottom of the housing. Reconnect all the power cables, replace the power supply, and insert the plug into the wall. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 24: Rack Installation

    You should inspect the box the chassis was shipped in and note if it was damaged in any way. If the chassis itself shows damage, file a damage claim with the carrier who delivered it and notify the respective Bosch RMA desk. You will also need it placed near at least one grounded power outlet.

  • Page 25: General System Precautions

    A reliable ground must be maintained at all times. To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e. the use of power strips, etc.). Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 26: Rack Mounting Instructions

    To separate the inner and outer rails: Locate the rail assembly in the chassis packaging. Extend the rail assembly by pulling it outward. Press the quick-release tab. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 27: Installing The Inner Rails

    4.3.3 Installing the outer rails to the rack Outer rails attach to the rack and hold the chassis in place. The outer rails extend between 30 inches and 33 inches. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 28: Installing The Chassis Into The Rack

    Before sliding the unit out for servicing make sure that the rack stabilizing mechanism is in place, or the rack is bolted to the floor. Failure to stabilize the rack can cause the rack to tip over. See also: Rack precautions, page 24 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 29: Installing The Chassis Into A Telco Rack

    Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. We recommended using an uninterruptible power supply (UPS). Press the power button on the control panel to turn on the system. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 30: System Setup - First Steps

    IP addresses to the video devices. Consult the local IT administrator to obtain a valid IP address range to be used with DIVAR IP and associated devices. – The default iSCSI settings are optimized for use with Bosch VMS/VRM. User with administrator rights: –...

  • Page 31: Using Configuration Wizard

    IP, you can use the Configuration Wizard. In all other cases we recommend using the Bosch VMS Configuration Client. Notice! To perform administrative tasks, the BVRAdmin account can be entered when Bosch VMS default screen is displayed. To do so, press CTRL+ALT+DEL, then hold down SHIFT while clicking the Switch User option.
  • Page 32 – all advanced configurations beyond a basic setup (maps or alarms, for example) For these tasks refer to the Bosch VMS manual (see Additional documentation and client software, page 60). To achieve a quick configuration using the Configuration Wizard: On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon.
  • Page 33 If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (VRM, Bosch Video Management System, Bosch Video Client, Configuration Manager) use the IP address for the unique assignment of the device. If using...
  • Page 34 | System setup - first steps DIVAR IP 7000 2U Time settings page You configure the time settings of the operating system. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 35 System setup - first steps | en Video settings page This page displays the devices and services that are included in the latest saved configuration. You can import a configuration. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 36 Device selection page This page displays all video devices that are not included in the latest saved configuration. Deselect the devices that should not be added to the configuration, then click Next. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 37 Client must be used in order to set or change device passwords. Password check is performed automatically, when you do not enter a character in a password field for a few seconds or you click outside the password field. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 38 Before selecting a recording profile observe the following: – Recording profile details All video devices use the default recording profile details. To change these use the Bosch VMS Configuration Client. – Stream quality settings All video devices use the default settings for Stream 1 to record.
  • Page 39 The Night schedule is active from 6 p.m. until 8 a.m., Monday through Friday. The Weekend schedule is active 24 hours a day for Saturday and Sunday. To change the schedule use the Bosch VMS Configuration Client. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 40 Notice! If the wizard stops and the message appears, that the internal iSCSI storage is not ready for recording because the LUNs are not formatted, you must format the LUNs using Bosch VMS Configuration Client. To format the LUNs, see Bosch VMS Configuration Manual, Chapter Formatting a LUN.
  • Page 41 DIVAR IP 7000 2U System setup - first steps | en User accounts page You can add users and passwords. Use Configuration Client to add user groups and to change permissions. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 42: Using Bosch Vms Configuration Client

    If the IP addresses of devices that should be added do not fall within the same IP range as the DIVAR IP, we recommend using the Bosch VMS Configuration Client. To assign device IP addresses: On the Bosch VMS default screen, double-click the Configuration Client icon change device network settings. The application starts. Enter the following, then click OK.

  • Page 43: Using Bosch Vms Operator Client

    DIVAR IP 7000 2U System setup - first steps | en Using Bosch VMS Operator Client Use Bosch VMS Operator Client to verify the live, recording and playback functionality of DIVAR IP. To verify live image functionality in the Operator Client On the Bosch VMS default screen, double-click the Operator Client icon .

  • Page 44: Recovering The Unit

    "write through" if no UPS is active, and the controller be buffered by a battery, when controller cache is set to "write back". Nevertheless, both caches have a great influence on the RAID performance. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 45 RAID configuration. "New" or "Clear" Configuration deletes the COD, if available. "Save Configuration" saves the new COD. "Initialize" deletes the Disk Data (OS). Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 46: Multiple Disks Failed - Theory

    But the "second failed" disk must be used for hopefully get the offline RAID degraded again. Two tools are useful to analyze what happened: - the Event Viewer in the Controller Bios Utility - the MegaCLI, a Command-Line Utility 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 47 In this example, we choose a start sequence 5800 (from 6412) and all 612 events left. We find a timestamp, that PD (Physical Drive) 6 was removed. PD 4 stops rebuilding. Finally, PD 4 is also removed. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 48 Event Description: Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD Event Data: 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 49 Event Description: VD 00/0 is now DEGRADED Event Data: =========== Target Id: 0 seqNum: 0x000018bc Time: Mon Jul 19 14:12:25 2010 Code: 0x000000fb Class: 2 Locale: 0x01 Event Description: VD 01/1 is now DEGRADED Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 50: Multiple Disks Failed - Practice

    Target Id: 0 Target Id: 1 6.2.2 Multiple disks failed – practice Press "C" to enter Utility. Click "start" and "scan disks". You get to the "foreign configuration import" screen. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 51 All disks are seen, but configuration is marked as not importable; click Cancel and view Configuration 2. It is the same; this means, a complex situation requires manual interaction. Click to clear all configurations, ignore the warning. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 52 In this example, disk in Slot 4 was first fail, Slot 7 second fail. Click on "second fail" PD7 in the Logical View and you get in the Physical drive menu. Choose "replace missing PD" and the correct row for Slot 7 drive and click "go". Ignore the warning. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 53 Now in logical view we see disk online and a degraded RAID. Click on disk 4 to get in the PD menu. Click on correct row, on "Global" or "dedicated Hot Spare" and on "go". Click on home; in the Logical View, the rebuild is starting. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 54: Foreign Configuration Disk Appears In The Windows Gui After Booting

    GUI. Click "scan foreign configuration". In the next window, click "clear foreign configuration". An unconfigured good drive is displayed. Right-click this drive and choose a hotspare type. You see the rebuild is starting at once. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 55: Megacli Commandline Utility

    MegaCli -AdpSetProp -CopyBackDsbl -val -aN|-a0,1,2|-aALL val - 0=Enable Copyback. 1=Disable Copyback. MegaCli -AdpSetProp -EnableJBOD -val -aN|-a0,1,2|-aALL val - 0=Disable JBOD mode. 1=Enable JBOD mode. MegaCli -AdpSetProp -DsblCacheBypass -val -aN|-a0,1,2|-aALL val - 0=Enable Cache Bypass. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 56 MegaCli -AdpDiag [val] -aN|-a0,1,2|-aALL val - Time in second. MegaCli -AdpBatTest -aN|-a0,1,2|-aALL MegaCli -PDList -aN|-a0,1,2|-aALL MegaCli -PDGetNum -aN|-a0,1,2|-aALL MegaCli -pdInfo -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL MegaCli -PDOnline -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL MegaCli -PDOffline -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 57 MegaCli -CfgLdDel -LX|-L0,2,5...|-LALL -aN|-a0,1,2|-aALL MegaCli -CfgSscdDel -LX|-L0,2,5...|-LALL -aN|-a0,1,2|-aALL MegaCli -CfgFreeSpaceinfo -aN|-a0,1,2|-aALL MegaCli -CfgSpanAdd -r10 -Array0[E0:S0,E1:S1] -Array1[E0:S0,E1:S1] [- ArrayX[E0:S0,E1:S1] ...] -aN MegaCli -CfgSpanAdd -r50 -Array0[E0:S0,E1:S1,E2:S2,...] -Array1[E0:S0,E1:S1,E2:S2,...] [-ArrayX[E0:S0,E1:S1,E2:S2,...] ...] [WT|WB] [NORA|RA|ADRA] [Direct|Cached] Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 58 MegaCli -EnclFwDownload -Encl N -Esm A|B -f <filename> -aN|-a0,1,2|-aALL MegaCli -PdFwDownload [-SataBridge] -PhysDrv[0:1,1:2,...] -f <filename> -aN|-a0,1,2|-aALL MegaCli -SetFacDefault -Encl N -Esm A|B -f <filename> -aN|-a0,1,2|-aALL MegaCli -PDCpyBk -Start -PhysDrv[E0:S0,E1:S1] -aN|-a0,1,2|-aALL 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 59 The following options may be given at the end of any command above: [-Silent] [-AppLogFile filename] [-NoLog] [-page [N]] [-] is optional. N - Number of lines per page. Exit Code: 0x00 Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 60: Additional Documentation And Client Software

    DIVAR IP 7000 2U Additional documentation and client software Documentation for Bosch Security System products can be found as follows: www.boschsecurity.com > select your region and your country > select Product Catalog > start a search for your product > select the product in the search results to show the existing documents.

  • Page 61: Appendices

    – All systems have a SATA DOM connected to Serial ATA ports (I-SATA-5) with a small power connector (DOM PWR). – SATA-DOM: Is plugged in connector I-SATA-5 on the motherboard. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 62: Motherboard Component Overview

    JI2C1/JI2C2 SMB to PCI Slots JPG1 Onboard VGA Enable Pins 1-2 (Enabled) 11,12 JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled) JPT1 TPM Enable Pins 1-2 (Enabled) BMC Jumper Pins 1-2 (Enabled) 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 63 Trusted Platform Module (TPM) Header Onboard Video Port X8SIL/X8SIL-F/X8SIL-V LED indicators Number Description Color/State Status Onboard Standby PWR LED Green: Solid on PWR On Indicator IPMI Heartbeat LED (X8SIL-F Yellow: Blinking IPMI: Normal Only) Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 64: Motherboard Features

    One (1) floppy drive interface (up to 1.44 MB) USB Devices (X8SIL Only) Two (2) USB ports on the rear IO panel One (1) Type A internal connector I/O Devices (Continued) USB Devices (X8SIL-F/X8SIL-V Only) 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...
  • Page 65 PECI (Platform Environment Configuration Interface) 2.0 support System resource alert via Supero Doctor III SuperoDoctor III, Watch Dog, NMI Chassis Intrusion Header and Detection CD Utilities BIOS flash upgrade utility Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 66: Block Diagram

    F/X8SIL-V motherboard to offer a high-speed Direct Media Interface (DMI) for chip-to-chip true isochronous communication with the processor. This feature allows the X8SIL/X8SIL-F/X8SIL- V to achieve up to 10 Gb/s of software-transparent data transfer on each direction, achieving 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 67: Pc Health Monitoring

    Pressing the power button again to wake-up the whole system. During the SoftOff state, the ATX power supply provides power Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...

  • Page 68: Power Supply

    Unlike fiber-optic networks that require special cabling, iSCSI can run over long distance using existing networks. 2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 69: Overview Of The Nuvoton Bmc Controller

    WPCM450 (Manufacturer P/N WPCM450RA0BX) also has all the features as described above plus IPMI 2.0 support. This particular chip is installed in the X8SIL-F and X8SIL-V models. However, IPMI is supported only on the X8SIL-F motherboard. Bosch Sicherheitssysteme GmbH Installation Manual 2013.09 | V2 | DOC...
  • Page 72 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2013...

This manual is also suitable for:

Dip-7082-8hd

Table of Contents