All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by ER/TY 1263 BG TV Quality, the Netherlands...
EN 2 Q552.2L LA Revision List 1. Revision List Manual xxxx xxx xxxx.0 • Chapter 5: modified SSB replacement procedure; see • First release. section 5.9.13. • Chapter 6: added white tone values; see section 6.3.1. • Chapter 9: added wiring diagram Berlinale 40".
Technical Specifications, Diversity, and Connections Q552.2L LA EN 3 Connections REAR CONNECTORS SIDE CONNECTORS 3 13 (optional) BOTTOM REAR CONNECTORS (optional) (1) ARC HDMI (optional) 19110_051_110421.eps 110716 Figure 2-1 Connection overview Note: The following connector colour abbreviations are used - TD+ Transmit signal (acc.
EN 4 Q552.2L LA Technical Specifications, Diversity, and Connections 7 - HDMI 1: Digital Video - In, Digital Audio with ARC - In/ 2.3.3 Side Connections 10 - SD-Card: Secure Digital Card - In/Out (optional) 10000_017_090121.eps 090428 Figure 2-4 HDMI (type A) connector...
Spare Parts the following points: • Route the wire trees correctly and fix them with the For the latest spare part overview, consult your Philips Spare mounted cable clamps. Part web portal. • Check the insulation of the Mains/AC Power lead for external damage.
EN 6 Q552.2L LA Precautions, Notes, and Abbreviation List result in sets which have the same CTN (Commercial Type 6 = play 16 : 9 format, 12 = play 4 : 3 Number; e.g. 28PW9515/12) but which have a different B.O.M.
Page 7
Precautions, Notes, and Abbreviation List Q552.2L LA EN 7 Digital Noise Reduction: noise The SDI signal is self-synchronizing, reduction feature of the set uses 8 bit or 10 bit data words, and has DRAM Dynamic RAM a maximum data rate of 270 Mbit/s,...
Page 8
SOPS Self Oscillating Power Supply Serial Peripheral Interface bus; a 4- wire synchronous serial data link standard S/PDIF Sony Philips Digital InterFace SRAM Static RAM Service Reference Protocol Small Signal Board Spread Spectrum Clocking, used to reduce the effects of EMI...
Page 15
Mechanical Instructions Q552.2L LA EN 15 Tape (150 m.m.) 5 × Tape (80 m.m.) 16 × Clamp (11 m.m.) 2 × Stick-on Clamp 1 × 19111_015_110519.eps 110519 Figure 4-7 Cable dressing 46PFL7606D/7x (Emmy) back to 2012-Mar-16 div. table...
Page 16
EN 16 Q552.2L LA Mechanical Instructions 19112_101_110712.eps 110712 Figure 4-8 Cable dressing 47PFL8606D/7x (Sundance) Service Positions For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop tools.
Page 17
Mechanical Instructions Q552.2L LA EN 17 Assy/Panel Removal Berlinale styling Warning: Disconnect the mains power cord before removing (xxPFL5806D/78) the rear cover. Instructions below apply to the 32PFL5606H/12, but will be 1. Remove screw caps [1] that cover VESA screw holes.
Page 18
EN 18 Q552.2L LA Mechanical Instructions 4.3.5 Stand bracket removal 4.3.8 IR/LED/Keyboard Refer to Figure 4-10 for details. Refer to Figure 4-12 for details. Caution: it is mandatory to remount all different screws at their 1. Remove the stand bracket as described earlier.
Page 19
Mechanical Instructions Q552.2L LA EN 19 4.3.9 LED Panel Refer to Figure 4-14 for details. 1. Remove the SSB as described earlier. 2. Remove the PSU as described earlier. 3. Remove the stand as described earlier. 4. Remove the stand bracket as described earlier.
Page 20
EN 20 Q552.2L LA Mechanical Instructions 4.4.3 Mains Switch Refer to Figure 4-17 for details. 19100_047_110216.eps 110216 Figure 4-17 Mains switch The mains switch is mounted on a plastic subframe and can be 19101_007_110407.eps removed without removing the subframe. 110407 1.
Page 21
Mechanical Instructions Q552.2L LA EN 21 4.4.7 LCD Panel 7. Remove the keyboard control-, and IR & LED board as described earlier. 8. Remove all remaining cables and subframes. Refer to Figure 4-22 Figure 4-24 for details. 9. Use a screwdriver to release the catches [3] that secure the panel.
Page 22
EN 22 Q552.2L LA Mechanical Instructions 4.5.3 Mains Switch Refer to Figure 4-25 for details. 19100_047_110216.eps 110216 Figure 4-25 Mains switch The mains switch is mounted on a plastic subframe and can be removed without removing the subframe. 1. Use a screwdriver and push the switch out of its casing [1].
Page 23
Mechanical Instructions Q552.2L LA EN 23 4.5.5 Small Signal Board (SSB) Refer to Figure 4-27 for details. 19100_053_110216.eps 110216 Figure 4-29 Keyboard control, IR & LED board [2/2] 1. Remove the stand and the plastic support [1]. 2. Unplug the connector [2].
Page 24
EN 24 Q552.2L LA Mechanical Instructions 4.5.8 LCD Panel Refer to Figure 4-31 Figure 4-32 for details. 19100_055_110216.eps 110216 Figure 4-31 LCD panel [1/2] 1. Remove the SSB as described earlier. 2. Remove the PSU as described earlier. 3. Remove the tweeters with their subframes and subwoofer as described earlier.
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 25 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: How to Activate SDM 5.1 Test Points For this chassis there are two kinds of SDM: an analogue SDM 5.2 Service Modes...
Page 26
EN 26 Q552.2L LA Service Modes, Error Codes, and Fault Finding • B= the SW branch version. This is a sequential number (this is no longer the region indication, as the software is now multi-region). • X.Y.W.Z= the software version, where X is the...
Page 27
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 27 fit on the screen, move the “CURSOR UP/DOWN” key to Contents of CSM display the next/previous menu items. The contents are reduced to 3 pages: General, Software • With the “CURSOR LEFT/RIGHT” keys, it is possible to: versions and Quality items.
Page 28
EN 28 Q552.2L LA Service Modes, Error Codes, and Fault Finding How to Exit CSM 7U0X or others FET’s on shortcircuit before activating SDM via Press “MENU” (or "HOME") / “Back” key on the RC-transmitter. the service pads. Stepwise Start-up...
Page 29
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 29 Stand by or Mains is applied Protection Standby Supply starts running. All standby supply voltages become available. st-by µP resets If the protection state was left by short circuiting the Initialise I/O pins of the st-by µP:...
Page 30
EN 30 Q552.2L LA Service Modes, Error Codes, and Fault Finding Reset-system is switched HIGH by the Reset-system is switched HIGH by the AVC at the end of the bootscript AVC at the end of the bootscript AVC releases Reset-Ethernet, Reset-USB and...
Page 31
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 31 Constraints taken into account: - Display may only be started when valid LVDS output clock can be delivered by the AVC. - To have a reliable operation of the EEFL backlight, the backlight should be driven with a maximum PWM duty cycle during the first seconds.
Page 32
EN 32 Q552.2L LA Service Modes, Error Codes, and Fault Finding Semi Standby The assumption here is that a fast toggle (<2s) can only happen during ON->SEMI ->ON. In these states, the AVC is still active and can provide the 2s delay. If the transition ON->SEMI- >STBY->SEMI->ON can be made in less than 2s,...
Page 33
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 33 Active Mute all sound outputs via softmute Wait 100ms Set main amplifier mute (I/O: audio-mute) Force ext audio outputs to ground (I/O: audio reset) And wait 5ms switch off Ambilight...
Page 34
EN 34 Q552.2L LA Service Modes, Error Codes, and Fault Finding Semi Stand by If ambientlight functionality was used in semi-standby (lampadaire mode), switch off ambient light (see CHS ambilight) *) If this is not performed and the set is...
Introduction The error code buffer contains all detected errors since the last ComPair (Computer Aided Repair) is a Service tool for Philips time the buffer was erased. The buffer is written from left to Consumer Electronics products. and offers the following: right, new errors are logged at the left side, and all other errors 1.
Page 36
EN 36 Q552.2L LA Service Modes, Error Codes, and Fault Finding • Via the blinking LED procedure. See section 5.5.3 How to content, as this history can give significant information). This to Clear the Error Buffer. ensure that old error codes are no longer present.
Page 37
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 37 • Error 35 (main NVM). When there is no I • Activate the CSM. The blinking front LED will show only communication towards the main NVM during start-up, the latest layer 1 error, this works in “normal operation”...
Page 38
EN 38 Q552.2L LA Service Modes, Error Codes, and Fault Finding 5.9.1 Ambilight becomes available (+12V is enabled by STANDBY signal when "low"). Supply voltages +3V3, +2V5, +1V8, +1V2 and +5V-TUN are switched "on" by signal ENABLE-3V3 when "low", provided Due to degeneration process of the LED’s fitted on the ambi...
Page 39
Service Modes, Error Codes, and Fault Finding Q552.2L LA EN 39 5.9.6 Exit “Factory Mode” • Some failures are indicated by error codes in the logging, check with error codes table (see Table “5-2 Error code overview”).e.g. => <<<ERROR>>>PLFPOW_MERR.C : When an “F”...
Page 40
EN 40 Q552.2L LA Service Modes, Error Codes, and Fault Finding 5.9.13 SSB Replacement For a more general overview of steps to follow, refer to figure 5-13 SSB replacement flowchart. Follow the instructions in the flowchart in case a SSB has to be exchanged.
Page 41
Before starting: - prepare a USB memory stick with the latest software - download the latest Main Software (Fus) from www.p4c.philips.com - unzip this file - create a folder ”upgrades” in the root of a USB stick (size > 50 MB) and save the autorun.upg file in this "upgrades"...
Page 42
EN 42 Q552.2L LA Service Modes, Error Codes, and Fault Finding Set is st art in g u p in F act o ry m o d e Set is starting up in F actory m ode? Noisy picture with bands/lines is visible and the An “F”...
Page 43
1. Disconnect the TV from the Mains/AC Power. 1. Set the correct option codes (see sticker inside the TV). 2. Press the “OK” button on a Philips TV remote control or a 2. Update the TV software => see the eUM (electronic User Philips DVD RC-6 remote control (it is also possible to use Manual) for instructions.
Page 44
How to start the “back-up software upgrade application” manually: 1. Disconnect the TV from the Mains/AC Power. 2. Press the “CURSOR DOWN”-button on a Philips TV remote control while reconnecting the TV to the Mains/AC Power. 3. The back-up software upgrade application will start.
Alignments Q552.2L LA EN 45 6. Alignments Index of this chapter: • LATAM models: an NTSC M TV-signal with a signal 6.1 General Alignment Conditions strength of at least 1 mV and a frequency of 61.25 MHz 6.2 Hardware Alignments (channel 3).
EN 46 Q552.2L LA Alignments • When finished press OK on the RC, then press STORE (in Option Settings the SAM root menu) to store the aligned values to the NVM. • Restore the initial picture settings after the alignments.
Page 47
Alignments Q552.2L LA EN 47 6.4.6 Option Bit Overview Caution When manipulating option codes, know what you’re doing. Wrong option codes could damage the set. For test purposes, please find below an overview of the Option Prescribed option codes below are an example, not valid for all Codes on bit level.
Page 48
1 = ON (automatic software upgradable via internet) Bit 3 Online Service 0 = OFF 1 = ON (connection to internet provider Philips) Bit 2 WiFi 0 = OFF 1 = ON (wireless connection to ethernet; no link with “Ethernet option”...
Page 49
Alignments Q552.2L LA EN 49 Option & Bit Dec. Value Option Name Prescribed Value Description Bit 10 1024 DVB-S 0 = OFF 1 = ON (ATSC/DVB should be ON) Bit 9 DVB-C 0 = OFF 1 = ON (ATSC/DVB should be ON)
Page 50
EN 50 Q552.2L LA Alignments Option & Bit Dec. Value Option Name Prescribed Value Description Bit 0 (LSB) 0 = no fan 1 = fan(s) present) Option 8 (prescribed value 00012 Bit 15 (MSB) 32768 Test 8 Bit 14 16384...
Page 51
Alignments Q552.2L LA EN 51 Main Menu Sub-menu 1 Sub-menu 2 Sub-menu 3 Description Alignment White point Colour temperature Normal 3 different modes of colour temperature can be selected Warn Cool White point red LCD White Point Alignment. For values, see Table 6-3 White tone default setting 32"...
Page 52
EN 52 Q552.2L LA Alignments Main Menu Sub-menu 1 Sub-menu 2 Sub-menu 3 Description Download from USB Channel list To download several settings from the USB stick to the TV Personal settings Option codes Alignments Identification data All (options included)
Introduction 7.1.2 TV550 Architecture Overview The Q552.2L LA is part of the TV550 platform and uses the (same) PNX855xx chipset. For details about the chassis block diagrams refer to chapter 9. The major deltas versus its predecessor Q551 are: Block Diagrams.
Page 54
EN 54 Q552.2L LA Circuit Descriptions 7.1.3 SSB Cell Layout 19110_052_110421.eps 110421 Figure 7-2 SSB layout cells (top view) back to 2012-Mar-16 div. table...
Circuit Descriptions Q552.2L LA EN 55 Power Supply Connector 1308 1316 - 1319 1M95 7.2.1 Connector Overview, Block Diagram and Fault Finding Descr. Mains Display Description PSU to SSB CN2 - CN3 Anode 2+ LED input +12V Table 7-1 Connector overview non-Ambilight sets n.c.
Page 56
EN 56 Q552.2L LA Circuit Descriptions Check First step Second step Normal operation Check the fuse (F101) Apply the mains voltage (AC Check the Standby voltage Check the entire block (PC102, V , etc.) at C306: measure 3.3 V Check the PFC voltage at C644...
Page 57
Circuit Descriptions Q552.2L LA EN 57 + 5V 5-TUN 196 m A + 5V + 5V 5-TUN + 5V -TUN + 5V + 5V -TUN 2179 m A 196 m A dc -dc s tabiliz er + 12V + 3V 3...
Page 58
EN 58 Q552.2L LA Circuit Descriptions • RT control • Improved MPEG artefact reduction compared with • HPD control PNX8543 • Sync detection • Security for customers own code/settings (secure flash). • TMDS output control • CEC control The TV550 combines front-end video processing functions, •...
Page 59
Circuit Descriptions Q552.2L LA EN 59 from the back of the set) acts as a Master and the module on the left acts as a Slave. The NVM is located on the Master Ambilight module. This PNX85500 CPLD AmbiLight AmbiLight...
EN 60 Q552.2L LA IC Data Sheets 8. IC Data Sheets This chapter shows the internal block diagrams and pin electrical diagrams (with the exception of “memory” and “logic” configurations of ICs that are drawn as “black boxes” in the ICs).
Page 61
IC Data Sheets Q552.2L LA EN 61 Diagram 10-6-10 Temp sensor & headphone B01J, LM75BDP (IC 7FD1) Block diagram LM75B BIAS POINTER CONFIGURATION REFERENCE REGISTER REGISTER TEMPERATURE COUNTER BAND GAP REGISTER 11-BIT TEMP SENSOR SIGMA-DELTA A-to-D TIMER REGISTER CONVERTER OSCILLATOR...
Page 62
EN 62 Q552.2L LA IC Data Sheets Diagram 10-7-1 NANDflash - conditional access B02A, PNX855xx (IC7S00) Block diagram PNX8550x MEMORY CONTROLLER TS input MPEG SYSTEM CI/CA LVDS for TS out/in for PRIMARY PROCESSOR flat panel display VIDEO PCMCIA LVDS (single, dual or...
Page 63
IC Data Sheets Q552.2L LA EN 63 Diagram 10-8-1 Audio B03A, TPA312xD2PWP (IC7D10) Block diagram TPA3120D2 0.22 F 22 H 470 F ROUT 0.68 F PGNDR 0.68 F PGNDL LOUT BYPASS 22 H 470 F AGND 0.22 F PVCCL AVCC...
Page 64
EN 64 Q552.2L LA IC Data Sheets Diagram 10-8-2 DC/DC B03B, TPS53126PW (IC7U03) Block diagram Pinning information VBST1 DRVH1 DRVL1 PGND1 VFB1 TRIP1 VREG5 TEST1 V5FILT TEST2 VFB2 TRIP2 PGND2 DRVL2 DRVH2 VBST2 18310_300_090319.eps 100416 Figure 8-5 Internal block diagram and pin configuration...
Page 65
IC Data Sheets Q552.2L LA EN 65 Diagram 10-8-5 DC/DC B03E, ST1S10PH (IC 7UD0) Block diagram ST1S10PH Pinning information DFN8 (4 × 4) PowerSO-8 I_18010_083.eps 110601 Figure 8-6 Internal block diagram and pin configuration back to 2012-Mar-16 div. table...
Page 66
EN 66 Q552.2L LA IC Data Sheets Diagram 10-8-5 DC/DC B03E, LD1117DT25 (IC 7UD2) Block diagram LD1117DT Pinning information DPAK F_15710_166.eps 100402 Figure 8-7 Internal block diagram and pin configuration back to 2012-Mar-16 div. table...
Page 67
IC Data Sheets Q552.2L LA EN 67 Diagram 10-9-3 Ethernet & Service B04C, LAN8710A-EZKH (IC 7E10) Block diagram MODE0 HP Auto-MDIX Auto- 10M Tx MODE1 MODE Control Negotiation Logic Transmitter TXP / TXN MODE2 Reset Transmit Section RXP / RXN...
Page 68
EN 68 Q552.2L LA IC Data Sheets Diagram 10-9-4 HDMI B04D, SII9x87B (IC 7EC1) Block diagram Pinning information 18770_303_100217.eps 100217 Figure 8-9 Internal block diagram and pin configuration back to 2012-Mar-16 div. table...
Page 69
IC Data Sheets Q552.2L LA EN 69 8.10 Diagram 10-9-5 Headphone B04E, TPA6111A2DGN (IC 7EE1) Block diagram IN 1− − TPA6111A2 IN 2− − SHUTDOWN Bias Control Pinning information D OR DGN PACKAGE (TOP VIEW) IN1− BYPASS IN2− SHUTDOWN 18770_309_100217.eps...
Page 70
EN 70 Q552.2L LA IC Data Sheets Personal Notes: 10000_012_090121 back to 2012-Mar-16 div. table...
Block Diagrams Q552.2L LA EN 75 Block Diagram Video VIDEO B01F B01K B06B TUNER TUNER BRASIL PNX85500 VIDEO OUT - LVDS 1G50 7S00 PNX85537EB 7FE0 B02A VIDEO STREAM B02F LVDS TC90517FG 1T01 FA2327 TS-FE-VALID TNR_SER1_MIVAL TS-FE-SOP MAIN HYBRID LOUT1 TNR_SER1_SOP...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 80 10. Circuit Diagrams and PWB Layouts 10.1 A 272217190323 - 272217190353 PSL 10-1-1 Power Supply Unit with Integrated LED Driver Power Supply Unit with Integrated Led Driver TP238 TP237 LED_CN3_A JW24...
Page 81
Circuit Diagrams and PWB Layouts Q552.2L LA EN 81 10-1-2 Layout top 2722 171 90323 2011-05-02 Layout top 2722 171 90353 PLDE-P008A PLDE-P008A_CKD 19132_007_111219.eps 111219 back to 2012-Mar-16 div. table...
Page 82
Circuit Diagrams and PWB Layouts Q552.2L LA EN 82 10-1-3 Layout bottom 2722 171 90323 2011-05-02 Layout bottom 2722 171 90353 PLDE-P008A PLDE-P008A_CKD 19132_008_111219.eps 111219 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 83 10.2 A 272217190324 - 272217190402 PSL 10-2-1 Power Supply Unit with Integrated LED Driver Power Supply Unit with Integrated Led Driver • • • • TP238 • • • • •...
Page 84
Circuit Diagrams and PWB Layouts Q552.2L LA EN 84 10-2-2 Layout top 2722 171 90324 2010-12-09 Power Supply Unit with 2722 171 90402 Integrated Led Driver PLDG-P010A PLDG-P010A_CKD 19115_002_120308.eps 120308 back to 2012-Mar-16 div. table...
Page 85
Circuit Diagrams and PWB Layouts Q552.2L LA EN 85 10-2-3 Layout bottom 2722 171 90324 2010-12-09 Power Supply Unit with 2722 171 90402 Integrated Led Driver PLDG-P010A PLDG-P010A_CKD 19115_003_120308.eps 120308 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 86 10.3 A 272217190352 PSL 10-3-1 Power Supply Unit with Integrated LED Driver Power Supply Unit with Integrated Led Driver LED_CN3_A D402 R454 SB3200 • • • • TP121 • • •...
Page 87
Circuit Diagrams and PWB Layouts Q552.2L LA EN 87 10-3-2 Layout top 2010-10-19 Power Supply Unit with 2722 171 90352 Integrated Led Driver PLDC-P005A_CKD 19115_008_120309.eps 120309 back to 2012-Mar-16 div. table...
Page 88
Circuit Diagrams and PWB Layouts Q552.2L LA EN 88 10-3-3 Layout bottom 2010-10-19 Power Supply Unit with 2722 171 90352 Integrated Led Driver PLDC-P005A_CKD 19115_009_120309.eps 120309 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 89 10.4 A 272217190355 - 272217190359 PSL 10-4-1 Power Supply Unit with Integrated LED Driver Power Supply Unit with 200UH TP57 TP58 TP51 VLED LED_CN1_A L401 Integrated Led Driver D401 RF101L4S R416...
Page 90
Circuit Diagrams and PWB Layouts Q552.2L LA EN 90 10-4-2 Layout top 2722 171 90355 2011-03-08 Layout top 2722 171 90359 PLDE-P016A_CKD PLDE-P016A_CBU 19132_010_111219.eps 111219 back to 2012-Mar-16 div. table...
Page 91
Circuit Diagrams and PWB Layouts Q552.2L LA EN 91 10-4-3 Layout bottom 2722 171 90355 2011-03-08 Layout bottom 2722 171 90359 PLDE-P016A_CKD PLDE-P016A_CBU 19132_011_111219.eps 111219 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 92 10.5 A 272217190379 - 272217190401 PSL 10-5-1 Power Supply Unit with Integrated LED Driver Power Supply Unit with Integrated Led Driver CN2_1316 D402 TP238 L402 ANODE_L SB3200 DO-201 ANODE_L1 JW60 JW59...
Page 93
Circuit Diagrams and PWB Layouts Q552.2L LA EN 93 10-5-2 Layout top 2722 171 90379 2010-11-06 Power Supply Unit with 2722 171 90401 Integrated Led Driver PLDH-P018A PLDH-P018A_CKD 19115_005_120308.eps 120308 back to 2012-Mar-16 div. table...
Page 94
Circuit Diagrams and PWB Layouts Q552.2L LA EN 94 10-5-3 Layout bottom 2722 171 90379 2010-11-06 Power Supply Unit with 2722 171 90401 Integrated Led Driver PLDH-P018A PLDH-P018A_CKD 19115_006_120308.eps 120308 back to 2012-Mar-16 div. table...
Page 108
Circuit Diagrams and PWB Layouts Q552.2L LA EN 108 10-7-3 Digital video in PNX85500: Digital video in B02C B02C 7S00-6 PNX85500 HDMI_DV HDMIA-RX2+ RX0_A HDMIA-RX2- HDMIA-RX1+ RX1_A HDMIA-RX1- DDCA-SCL DDC_A DDCA-SDA HDMIA-RX0+ IS10 RX2_A HDMIA-RX0- HOT_PLUG_A HDMIA-RXC+ RXC_A HDMIA-RXC- +3V3...
Page 149
Circuit Diagrams and PWB Layouts Q552.2L LA EN 149 10-15-3 Digital video in PNX85500: Digital video in B02C B02C 7S00-6 PNX85500 HDMI_DV HDMIA-RX2+ HDMIA-RX2- RX0_A HDMIA-RX1+ RX1_A HDMIA-RX1- DDCA-SCL DDC_A DDCA-SDA HDMIA-RX0+ IS10 RX2_A HDMIA-RX0- HOT_PLUG_A HDMIA-RXC+ HDMIA-RXC- RXC_A +3V3...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 179 10.24 E 27221719028x IR/LED/Key Board 10-24-1 Leading Edge Module Leading Edge Module 2010-08-24 Leading Edge Module 2722 171 9028 19101_058_110505.eps 110505 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 180 10.25 E 272217190288 IR/LED/Key Board 10-25-1 Leading Edge Module Leading Edge Module +3.3V +3.3V Proxim ity PIC16LF1933 100uH 4.7uF/16V ICSPDAT CPS5 100R VPP/M CLR/RE3 RB7/ICSPDAT ICSPCLK SEG12/Vcap(2)/SS(1)/SRNQ(1)/C2OUT(1)/C12IN0-/AN0/RA0 RB6/ICSPCLK BUZZER SEG7/C12IN1-/AN1/RA1 CPS4...
Page 181
Circuit Diagrams and PWB Layouts Q552.2L LA EN 181 10-25-2 Layout Layout top Layout bottom 2011-04-21 Leading Edge Module 2722 171 9034 Berlinale layout 19131_020_110616.eps 110616 back to 2012-Mar-16 div. table...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 184 10.28 AL1 820400091574 10-28-1 LiteOn 5 LED 12V 50% LiteOn 5 LED 12V 50% AL1A AL1A +3V3 2B11 100n 7B26-1 TLC5946RHB 1M83 3B00-1 FB01 BLANK PWM-R1 BLANK PWM-CLOCK-BUF 150R PWM-G1 +12V...
Page 185
Circuit Diagrams and PWB Layouts Q552.2L LA EN 185 10-28-2 LiteOn 5 LED 12V 50% LiteOn 5 LED 12V 50% AL1B AL1B 7100 7101 LTW-008RGB2-PH1 LTW-008RGB2-PH1 BLUE BLUE PWM-B2 PWM-B2-R GREEN GREEN PWM-G2 PWM-G2-R PWM-R2 PWM-R2-R 2011-01-21 AL 2K11 LiteOn...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 186 10.29 AL3 820400091353 10-29-1 LiteOn 1 LED RGB Master 24V LiteOn 1 LED RGB Master 24V AL3A AL3A 7005 LTW-008RGB2 3C01-1 BLUE BLUE 220R 3C01-2 3C02 GREEN GREEN 220R 3C03-1 3C03-2...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 189 10.32 AL3 820400091583 10-32-1 LiteOn 4 LED 12V 50% LiteOn 4 LED 12V 50% AL3A AL3A 1M84 SPI-CLOCK PWM-B4 SPI-DATA-OUT SPI-DATA-RETURN PWM-G4 +3V3 PWM-CLOCK PWM-R4 SPI-CSn LATCH +3V3 BLANK PROG TEMP-SENSOR +12V FH34SRJ-26S-0.5SH(50)
Page 190
Circuit Diagrams and PWB Layouts Q552.2L LA EN 190 10-32-2 LiteOn 4 LED 12V 50% LiteOn 4 LED 12V 50% AL3B AL3B 7200 3C11 7201 7202 LTW-008RGB2-PH1 LTW-008RGB2-PH1 LTW-008RGB2-PH1 BLUE cc10 BLUE BLUE PWM-B3 9C10 GREEN GREEN GREEN PWM-G3 +12V...
Page 191
Circuit Diagrams and PWB Layouts Q552.2L LA EN 191 10-32-3 LiteOn 4 LED 12V 50% LiteOn 4 LED 12V 50% AL3C AL3C 3C31 7102 LTW-008RGB2-PH1 PWM-B2-R cc30 BLUE 9C30 PWM-G2-R GREEN +12V PWM-R2-R 3C33-1 220R 3C33-2 220R 2010-12-02 AL 2K11 LiteOn...
Circuit Diagrams and PWB Layouts Q552.2L LA EN 192 10.33 AL3 820400091592 10-33-1 LiteOn 7 LED 12V 50% LiteOn 7 LED 12V 50% AL3A AL3A 7300 7301 7302 1M84 LTW-008RGB2-PH1 LTW-008RGB2-PH1 LTW-008RGB2-PH1 3C03 SPI-CLOCK BLUE BLUE BLUE PWM-B4 SPI-DATA-OUT +12V...
Page 193
Circuit Diagrams and PWB Layouts Q552.2L LA EN 193 10-33-2 LiteOn 7 LED 12V 50% LiteOn 7 LED 12V 50% AL3B AL3B 7200 7201 7202 LTW-008RGB2-PH1 LTW-008RGB2-PH1 LTW-008RGB2-PH1 3C14 PWM-B3 BLUE BLUE BLUE 9C12 PWM-G3 GREEN GREEN GREEN +12V cc12...
Page 194
Circuit Diagrams and PWB Layouts Q552.2L LA EN 194 10-33-3 LiteOn 7 LED 12V 50% LiteOn 7 LED 12V 50% AL3C AL3C 7102 3C15 LTW-008RGB2-PH1 BLUE PWM-B2-R 9C32 GREEN PWM-G2-R +12V cc32 PWM-R2-R 3C33-3 220R 3C33-4 220R FC17 FC50 FC18...