hit counter code
Toshiba Z10t-A User Manual
Hide thumbs Also See for Z10t-A:
Table of Contents

Advertisement

Quick Links

User's Manual
Z10t-A/WT310

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba Z10t-A

  • Page 1 User's Manual Z10t-A/WT310...
  • Page 2: Table Of Contents

    Table of Contents Chapter 1 TOSHIBA Legal, Regulatory and Safety Copyright, Disclaimer and Trademarks ..........1-1 Regulatory Information ................. 1-2 Video Standard Notice ................1-7 OpenSSL Toolkit License Issues ............1-7 FreeType License Issues ..............1-10 ENERGY STAR® Program ..............1-13 Disposing of the computer and the computer's batteries ....
  • Page 3 Special features ..................5-5 TOSHIBA Password Utility ..............5-7 TOSHIBA System Settings ..............5-9 TOSHIBA Media Player by sMedio TrueLink+ ........5-10 TOSHIBA Tablet Access Code Logon Utility ........5-11 ArcNote for Toshiba ................5-12 Camera 365 for Toshiba ..............5-16 TOSHIBA PC Health Monitor ..............
  • Page 4: Chapter 1 Toshiba Legal, Regulatory And Safety

    TOSHIBA computers. Copyright, Disclaimer and Trademarks Copyright © 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC.
  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s HDMI(micro) port, Universal Serial Bus (USB 3.0) port...
  • Page 7: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9: Following Information Is Only For Turkey

    The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
  • Page 10: Video Standard Notice

    For more detailed information about recycling of this product, please visit our website (http://www.toshiba- india.com) or contact call center (1800-200-8674). These symbols may not stick depending on the country and region where you purchased.
  • Page 11 ------------------------ /*===================================================== Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 12 ---------------------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
  • Page 13: Freetype License Issues

    USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 14 Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text: """ Portions of this software are copyright (C) <year> The FreeType Project (www.freetype.org).
  • Page 15 source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: Redistribution of source code must retain this license file (`FTL.TXT') unaltered;...
  • Page 16: Energy Star Program

    ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...
  • Page 17 Provide adequate ventilation Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode). In this condition, observe the following: Never cover your computer or AC adaptor with any object.
  • Page 18: Cleaning The Computer

    Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
  • Page 19: Safety Icons

    Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer (The keyboard dock, however, can be moved when connected). Close the display panel (not applicable in tablet mode). Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down - a failure to follow this instruction may result in minor heat injury.
  • Page 20 Please read. A note is a hint or advice that helps you make best use of your equipment. User's Manual 1-17...
  • Page 21: Chapter 2 Getting Started

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 22: Conventions

    Series Model Name Operating Mode Supported Z10t-A Laptop mode: when TOSHIBA Keyboard Dock is docked Tablet mode: when TOSHIBA Keyboard Dock is undocked WT310 Tablet mode only Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures.
  • Page 23: Using Your Computer For The First Time

    This section provides basic information to start using your computer. It covers the following topics: Connecting TOSHIBA Keyboard Dock Connecting the AC adaptor Turning on the power Initial setup Getting to know Windows Use a virus-check program and make sure it is updated regularly.
  • Page 24: Toshiba Keyboard Dock

    To use the computer in laptop mode, you need to connect the TOSHIBA Keyboard Dock to the computer by following the steps below: Hold the computer with two hands on both the left and right sides.
  • Page 25 Figure 2-2 Opening the computer body 1. Computer body Product appearance depends on the model you purchased. Use reasonable care when opening and closing computer body. Opening it vigorously or slamming it shut could damage the computer. Be careful not to open the computer body too far as this could put stress on the hinges and cause damage.
  • Page 26: Connecting The Ac Adaptor

    DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 27 Never plug the AC adaptor into a power source that does not correspond to both the voltage and the frequency specified on the regulatory label of the unit. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury. Always use or purchase power cables that comply with the legal voltage and frequency specifications and requirements in the country of use.
  • Page 28: The Computer (Laptop Mode)

    Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. Connect the AC adaptor’s DC output plug to the DC IN 19V jack. Figure 2-6 Connecting the DC output plug to the computer (laptop mode) 1.
  • Page 29: Initial Setup

    After you turn on the power for the first time, do not turn it off until you have set up the operating system. Volume cannot be adjusted during Windows Setup. Press the computer's power button. Figure 2-8 Turning on the power (laptop mode) 1.
  • Page 30: Getting To Know Windows

    Getting to know Windows For detailed information on what is new and how to operate Windows, please refer to the Windows Help and Support. Start screen The Start screen is the launching pad for everything you can do in the Windows operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
  • Page 31: Turning Off The Power

    Password authentication is the default sign-in option. Toshiba also provides advanced sign-in options, such as Access Code verification. For more information, please refer to Chapter 5, Utilities. Turning off the power The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode.
  • Page 32: Restarting The Computer

    Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage. Restarting the computer Certain conditions require that you reset the computer, for example if: You change certain computer settings. If you need to restart the computer, there are two ways this can be achieved: In the Settings charm, click Power and then select Restart.
  • Page 33: Executing Sleep Mode

    Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
  • Page 34: Hibernation Mode

    Hibernation Mode The Hibernation Mode feature saves the contents of memory to the Solid State Drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.
  • Page 35 Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below: Click Power Options and then click Choose what the power button does or Choose what closing the lid does.
  • Page 36: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section.
  • Page 37 Figure 3-1 The computer in tablet mode 1. Display screen 15. HDMI(micro) port 2. Web Camera (front) 16. Memory media slot 3. Web Camera LED (front) 17. SIM card slot* 4. Ambient light sensor (not shown) 18. DC IN 19V jack 5.
  • Page 38 Display screen 29.5cm (11.6") LCD screen, configured with the following resolution: FHD, 1920 horizontal x 1080 vertical pixels Please be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen will be somewhat brighter than when it operates on battery power.
  • Page 39 Force Shut down hole Insert a slender object such as a needle into this hole to force a shut down when the computer is hung. Orientation lock Press to lock/unlock automatic rotation of the button screen orientation. Volume up/down Press the button to increase or decrease the buttons volume.
  • Page 40 AC adaptor can cause damage to the computer. Docking interface This interface enables the connection of the keyboard dock and the optional cradle described Optional TOSHIBA Accessories section. Hook holes Designed for engaging the hooks on the keyboard dock and ensuring a firm connection.
  • Page 41: Toshiba Keyboard Dock

    The regulatory information applicable to your computer can be identified here. Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, please refer to the Legal Footnotes section. TOSHIBA Keyboard Dock The following figure shows each important component of the keyboard dock. User's Manual...
  • Page 42 Figure 3-2 Front view of the keyboard dock 1. Touch Pad 7. AccuPoint 2. Touch Pad ON/OFF icon 8. Computer holder 3. TOSHIBA eco icon 9. Hook 4. Touch Pad control buttons 10. Docking connector 5. AccuPoint control buttons 11. Hook 6.
  • Page 43: Accupoint Control

    Touch Pad ON/OFF Double-tap to enable/disable the Touch Pad. icon TOSHIBA eco icon Double-tap to enable/disable TOSHIBA eco Utility. Touch Pad control The two buttons located below the Touch Pad buttons are used like the buttons on a standard mouse -...
  • Page 44 Eject button Begins the computer’s disconnect sequence. Once the eject button is pressed and the computer cannot communicate with external devices connected to the keyboard dock. Undock and re-dock the computer to re-establish communication. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries.
  • Page 45: The Computer (Laptop Mode)

    USB port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. The Computer (laptop mode) The following figure shows the front of the computer when TOSHIBA Keyboard Dock is connected. Figure 3-5 Front view of the computer (display panel closed) Product appearance depends on the model you purchased.
  • Page 46: Internal Hardware Components

    The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Health Monitor utility by clicking Desktop -> Desktop Assist (in taskbar) -> Support & Recovery -> PC Health Monitor, and then click PC Information.
  • Page 47 The capacity of the Solid State Drive varies depending on the model. To check which type of SSD is included in your model, open the TOSHIBA PC Health Monitor utility by clicking Desktop -> Desktop Assist (in taskbar) -> Support & Recovery -> PC Health Monitor, and then click PC Information.
  • Page 48: Intel Rapid Start Technology

    Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. The display controller also controls the video mode and uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed at a time.
  • Page 49: Intel Smart Connect Technology

    You can launch the BIOS setup utility to enable/disable the function and change the specified time setting from Sleep Mode to Hibernation Mode. Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. Select Power Management. Enable/Disable Intel(R) Rapid Start Technology function.
  • Page 50: Power Condition Descriptions

    ® For further information on setting up Intel Smart Connect Technology, please refer to the utility help. ® When Intel Smart Connect Technology is enabled, the computer may be turned on automatically. When you carry your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer.
  • Page 51: Battery Indicator

    Power on Power off (no operation) AC adaptor Remaining • Operates battery capacity • LED: off connected is above low battery trigger point Remaining • Operates battery capacity • LED: flashes is below low amber battery trigger point Remaining Computer shuts battery capacity down is exhausted...
  • Page 52 Flashing white Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor or battery) to maintain this condition. No light Under any other conditions, the indicator does not light. User's Manual 3-17...
  • Page 53: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer and highlights the precautions that should be taken when using it. Operating in Tablet Mode When operating the computer in tablet mode, follow the instructions below. Figure 4-1 Operating the computer Hold the computer firmly on your forearm.
  • Page 54: Changing The Screen Orientation

    Landscape mode. The computer is in laptop mode. The computer is connected to the optional cradle described in Optional TOSHIBA Accessories section. Avoid having direct contact with the other edges of the hand held device while the wireless device is turned on and transmitting.
  • Page 55: Using The Touch Screen

    Calibrating digital compass If you have downloaded a compass application to use this feature, please note that the performance of any compass feature will vary depending on environmental conditions. For example, any source using electromagnetic or radio waves. Before using any compass feature the compass needs to be calibrated for accuracy.
  • Page 56: Using The Touch Pad

    Do not use a protecting sheet for the touch screen as it may decrease its sensitivity to gestures. Using the Touch Pad The Touch Pad located on the TOSHIBA Keyboard Dock may support the following gestures: Tap once on the Touch Pad to activate an item, such as an app.
  • Page 57: Toshiba Pointing Devices

    Some of the Touch Pad operations described in this section are only supported in certain applications. TOSHIBA Pointing Devices AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer.
  • Page 58: Accupoint Precautions

    AccuPoint precautions Certain conditions can affect the on-screen pointer when using AccuPoint. For example, the pointer may travel contrary to AccuPoint operation or an error message may appear, if You touch the AccuPoint during power-up. You apply constant, soft pressure during power-up. There is a sudden temperature change.
  • Page 59 Figure 4-7 Stylus Pen Figure 4-8 Reserve Pen 1. Pen point 3. Eraser 2. Pen button Pen point Provides the same function as left clicking the mouse once. Pen button Press and hold this button and touch the tip of the pen on an object.
  • Page 60 The pen tip of the Reserve Pen cannot be replaced if it is worn. You can purchase a new one from a TOSHIBA authorized dealer. You can change the pen settings in Pen and Touch. To access it, click Desktop ->...
  • Page 61: Removing The Reserve Pen

    TOSHIBA is not liable for any problems arising on the products due to the use of the pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users. Removing the Reserve Pen To remove the Reserve Pen, slowly pull the Reserve Pen to remove it from the Reserve Pen slot.
  • Page 62: Replacing The Pen Tip

    Single tap Lightly tap the tip of the pen on an object and lift it immediately to execute an action. A single tap is similar to left clicking the mouse once. Double tap Lightly tap the tip of the pen twice on an object and lift it immediately to execute an action.
  • Page 63: The Keyboard

    Stylus Pen. When these refills have run out, you can purchase a new pen set from a TOSHIBA authorized dealer. A short and worn pen point is difficult to pull out. Replace the pen point with a refill before it becomes too short to remove.
  • Page 64: Function Key

    Function Key The function keys (F1 ~ F12) are the twelve keys at the top of your keyboard. The following specific functions are executed when the function keys are pressed in combination with the FN key. Key Combination Function FN + F1 Enters ''Lock computer mode''.
  • Page 65: Windows Special Keys

    Some functions will show the toast notification at the edges of the screen. Those toast notifications are disabled at factory default. You can enable them in the TOSHIBA Function Key application. To access it, click Desktop -> Desktop Assist (in taskbar) -> Tools &...
  • Page 66: Temporarily Changing Modes

    Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: Hold down FN key and press any other key - this key will operate as if the overlay were off.
  • Page 67: Battery

    Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed.
  • Page 68: Charging Time

    computer will enable Hibernation Mode so that you do not lose any data, and automatically turn itself off. You must recharge a battery pack when it becomes discharged. Procedures To recharge a battery pack, connect the AC adaptor to the DC IN 19V jack and plug the other end into a working outlet - the Battery indicator will glow amber while the battery is being charged.
  • Page 69: Monitoring Battery Capacity

    Charge the battery until the Battery indicator glows white. Repeat these steps two or three times until the battery recovers normal capacity. Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Taskbar Via the Battery Status in the Windows Mobility Center window You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
  • Page 70: Wireless Wan Device

    Batteries exhausted time When you turn off the power of your computer with batteries fully charged, the batteries will be exhausted within the following approximate period. Battery type Sleep Mode Shut Down Mode Battery pack (43Wh, 6 cell) about 10 days about 100 days RTC battery about 30 days...
  • Page 71 Locate the SIM card slot. To pop the SIM card tray partially open, insert a slender object (about 10mm) such as a straightened paper clip into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-14 Open the SIM card tray 1.
  • Page 72: Gps Function

    Do not touch the connectors on the SIM card or on the computer. Debris on the connectors may cause access problems. Removing a SIM Card To remove the SIM card, follow the steps as detailed below: Shut down the computer - make sure the Power indicator is off. To pop the SIM card tray partially open, insert a slender object (about 10mm) such as a straightened paper clip into the eject hole.
  • Page 73: Lan Cable Types

    The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation.
  • Page 74: Memory Media

    Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-16 Connecting the LAN cable 1. LAN jack 2. LAN cable Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.
  • Page 75: Media Care

    MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or playback protected material on another computer or other device, and you may not reproduce any copyrighted material except for your personal enjoyment.
  • Page 76: Inserting Memory Media

    Do not touch the metal part of a card or expose it to liquids or let it get dirty. After using card, return it to its case. The card is designed so that it can be inserted only one way. Do not try to force the card into the slot.
  • Page 77: Removing Memory Media

    Figure 4-18 Removing the dummy card 1. Memory media slot 2. Dummy card Turn the memory media so that the contacts (metal areas) face up. Insert the memory media into the memory media slot on the side of the computer. Figure 4-19 Inserting memory media 1.
  • Page 78: External Display

    Point to memory media and click the left Touch Pad control button. Push the memory media until you hear a click to partially release it. Grasp the memory media and remove it. Insert the dummy card back into the slot. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.
  • Page 79 Figure 4-20 Connecting the RGB cable to the External RGB monitor port 1. External RGB monitor port 2. RGB cable There are no fastening screws for an external monitor cable on the External RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used.
  • Page 80 Figure 4-21 Connecting the HDMI port on the computer 1. HDMI (micro) port 2. HDMI cable (Type D connector) Figure 4-22 Connecting the HDMI port on the keyboard dock 1. HDMI port 2. HDMI cable (Type A connector) Please do not plug/unplug an HDMI display device under the following conditions: The system is starting up.
  • Page 81: Optional Toshiba Accessories

    You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: User's Manual 4-29...
  • Page 82: Sound System And Video Mode

    USB & HDMI ports LAN jack Stylus Pen Stylus Pen can be purchased from your TOSHIBA dealer for use as spare items (spare pen tips and a tip draw-out tool are included). Reserve Pen Reserve Pen can be purchased from your TOSHIBA dealer.
  • Page 83: Realtek Hd Audio Manager

    If you feel the microphone volume level is inadequate, move the Microphone Boost slider to a higher level. Audio Enhancements In order to apply the sound effects for your current speaker, follow the steps below. Click Desktop and right click on the Speakers icon on the Taskbar, and then select Playback devices from the sub menu.
  • Page 84: Video Mode

    DTS Studio Sound DTS Studio Sound is a premium audio enhancement suite that utilizes revolutionary audio technology to provide the most immersive and realistic listening experience ever offered for a two speaker playback environment. DTS Studio Sound provides the following features: Advanced audio rendering to match 2D and 3D video content for enveloping surround sound Accurate placement of audio cues for immersive surround sound from...
  • Page 85: Chapter 5 Utilities And Advanced Usage

    README.TXT file (if applicable). TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier.
  • Page 86 Assist (in taskbar) -> Tools & Utilities -> Password Utility. ArcNote for Toshiba ArcNote for Toshiba makes it easy to manage your daily information, such as reminders, important minutes and to-do lists, etc. It allows creating and presenting your own contents in all formats and saved them as pieces of note that can be shared with others.
  • Page 87 System Settings. For more information, please refer to the TOSHIBA System Settings section. TOSHIBA Setup TOSHIBA Setup Utility is a BIOS setup utility that Utility provides you a menu-based user interface so that you can easily view and change BIOS settings.
  • Page 88 To access this utility, click Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> eco Utility. For details on TOSHIBA eco utility, see the help file. TOSHIBA Media This software is a multimedia player which can Player by sMedio be used to play back video, music and photo.
  • Page 89: Special Features

    For details on TOSHIBA PC Health Monitor, see the help file. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 90 System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.
  • Page 91: Toshiba Password Utility

    TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click the following items: Desktop ->...
  • Page 92 Please refer to TOSHIBA Setup Utility section for further information. If you forget an HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...
  • Page 93: Supervisor Password

    To run TOSHIBA System Settings, click Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities -> System Settings. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.
  • Page 94: Toshiba Media Player By Smedio Truelink

    TOSHIBA Media Player by sMedio TrueLink+ The apllication may not be preinstalled depending on your purchased model. Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink+: Notes on use This software is a multimedia player which can be used to play back video, music and photo.
  • Page 95: Toshiba Tablet Access Code Logon Utility

    TOSHIBA Media Player Manual. Use the following procedure to open TOSHIBA Media Player Online help: When TOSHIBA Media Player is running, click Help of the Settings charm. TOSHIBA Tablet Access Code Logon Utility You can use the Tablet Access Code Logon Utility to perform user login authentication using a hand-written access code.
  • Page 96: Home Screen

    Disclaimer TOSHIBA does not guarantee that the Tablet Access Code Logon Utility is completely secure or error-free at all times. TOSHIBA is not liable for any failure or damage that might arise out of your use of the Tablet Access Code Logon Utility, even if advised of the possibility thereof.
  • Page 97 By default, a few common categories have been created on first launch. If you want to create new categories, rename or delete saved categories, press and hold one category for a few seconds and then release. A pop-up menu will appear. To browse your notes, tap one of the categories, and then tap a notebook.
  • Page 98 Available editing options are detailed below. Depending on the note format (text, sketches, audio or images), the options may vary. Crop( Drag the handles to select an area to keep in the image. Tap Uncrop( ) will reset the handles. Auto Crop is provided specifically for improving snapshots of whiteboards, printed materials, etc.
  • Page 99: Advanced Options

    Share your notes with others in PDF format via Mail or SkyDrive. Notes on use Do not power off your computer while editing the notes, as it may cause saving failure possibly resulting in data loss. ArcNote for Toshiba doesn't support Portrait mode. User's Manual 5-15...
  • Page 100: Camera 365 For Toshiba

    Using Camera 365 for Toshiba To launch the application, tap Camera 365 for Toshiba in the Apps view. Start capturing By default, photo mode is activated and the back Web Camera is set. You’ll see the real-time preview screen.
  • Page 101 Photo mode Tap to switch between the pre-set camera modes to improve effects and enhance your photo-taking experiences. The option is not available in video mode. Normal mode( Normal mode is set by default. Timer mode( Count down before capturing a photo. 5 seconds is set by default and you can change the countdown time in the app settings.
  • Page 102: Toshiba Pc Health Monitor

    TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health (for models with battery) and the system cooling, informing you of significant system conditions.
  • Page 103: Starting The Toshiba Pc Health Monitor

    Follow the instructions displayed on screen in the message. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings.
  • Page 104: System Recovery

    In the Settings charm, click Power and then select Restart. Hold down the Volume down button until TOSHIBA Setup Utility is loaded. If TOSHIBA Keyboard Dock is connected, the BIOS setup utility can also be launched through the keyboard operation. Save your work.
  • Page 105: Creating Recovery Media

    If your computer is equipped with TOSHIBA Keyboard Dock, please make sure it is connected before restoring the system. Creating Recovery Media This section describes how to create Recovery Media. Be sure to connect the AC adaptor when you create Recovery Media.
  • Page 106 Please make sure to use the default Boot Mode option in the BIOS setup utility before restoring. 1. Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. In the BIOS setup screen, select Advanced -> System Configuration -> Boot Mode -> UEFI Boot(Default).
  • Page 107 Recovery Media. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. Restoring the pre-installed software from the...
  • Page 108: Ordering Recovery Discs From Toshiba

    Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. * Please note that this service is not free-of-charge. Visit https://backupmedia.toshiba.eu on the Internet. Follow the on-screen instructions. You will receive your Recovery Discs within two weeks after placing your order.
  • Page 109: Troubleshooting

    In reality many problems can be solved simply, but a few may require help from TOSHIBA Support - if you find you need to consult others, be prepared to describe the problem in as much detail as possible.
  • Page 110: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.
  • Page 111: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.
  • Page 112: Hardware And System Checklist

    If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the Battery indicator. If the indicator is glowing, the computer is connected to a live external power source.
  • Page 113: Overheating Power Down

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator.
  • Page 114: Real Time Clock

    BIOS setup utility by using the following steps: Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. Set the date in the System Date field. Set the time in the System Time field.
  • Page 115: Internal Display Panel

    (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the...
  • Page 116: Solid State Drive

    As a last resort you should reformat the Solid State Drive and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Memory Media Card For further information, please refer to Operating Basics.
  • Page 117: Touch Pad

    Touch Pad is either To access it, click Desktop -> Desktop Assist (in too sensitive or not taskbar) -> Control Panel -> Hardware and sensitive enough Sound -> Mouse. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual...
  • Page 118: Usb Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device.
  • Page 119: Sound System

    Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Please also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 120: Wireless Lan

    Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Wireless LAN Problem Procedure Cannot access...
  • Page 121: Toshiba Support

    TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 122: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the computer’s technical specifications. Physical Dimensions Physical Dimensions shown below do not include parts that extend beyond the main body. The physical dimensions may vary depending on the model you purchased. Size 299 (w) x 189 (d) x 12.4 (h) millimeters (computer only) (not including parts that extend beyond the main body).
  • Page 123: Ac Power Cord And Connectors

    AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm...
  • Page 124: Information For Wireless Devices

    United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n, b/g/n or Revision a/b/g/n/ac(draft)), as defined and approved by the Institute...
  • Page 125: Wireless Devices And Your Health

    If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please visit http://www.pc.support.global.toshiba.com, if you have any questions about using Wireless LAN or Bluetooth Module. In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy.
  • Page 126: Card Specifications

    TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications...
  • Page 127: Bluetooth Wireless Technology

    Radio Frequency Band 5GHz (5150-5850 MHz) (Revision a and n) Band 2.4GHz (2400-2483.5 MHz) (Revision b/g and n) The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range may travel larger distances.
  • Page 128: Radio Links

    Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other. Radio Regulatory Information The Wireless device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product.
  • Page 129 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 130 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules.
  • Page 131 Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca Taiwan Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio frequency devices.
  • Page 132 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
  • Page 133: Device Authorization

    Radio approvals for wireless devices This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the table below, please contact TOSHIBA Support. Austria Belgium Bulgaria...
  • Page 134: Legal Footnotes

    (41°F to 86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - contact TOSHIBA support for details). CPU performance may also vary from specifications due to design configuration.
  • Page 135: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
  • Page 136: Copy Protection

    Total Available Graphics Memory is the total of, as applicable, Dedicated Video Memory, System Video Memory and Shared System Memory. Shared System Memory will vary depending on system memory size and other factors. Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.
  • Page 137: Index

    Index Documentation list 2-1 Dual Pointing Device Touch Pad 6-9 AC adaptor additional 4-30 connecting 2-6 DC IN 19V jack 3-5, 3-9 Equipment checklist 2-1 ASCII characters 4-14 External monitor problems 6-12 Battery extending life 4-18 monitoring capacity 4-17 real time clock 3-12, 4-15 Hard disk drive save mode 5-6 automatic power off 5-5...
  • Page 138 Memory media slot 4-22 down 6-5 Power 6-5 Moving the computer 1-15 Real Time Clock 6-6 Sound system 6-11 MultiMediaCard TOSHIBA support 6-13 removing 4-25 Touch Pad 6-9 USB device 6-10 USB mouse 6-10 Password power on 5-6 Starting the computer by...
  • Page 139 SD/SDHC/SDXC Card formatting 4-23 note 4-23 Sleep Mode setting 2-12 System automatic 5-6 Sound system problems 6-11 TOSHIBA Desktop Assist 5-1 TOSHIBA Display Utility 5-2 Touch Screen USB device problems 6-10 Video mode 4-32 Video RAM 3-12 Web Camera 3-3...

This manual is also suitable for:

Wt310

Table of Contents