• Installed Ethernet Adapter Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above ™ Package Contents Power over Ethernet D-Link AirPremier DWL-3200AP ™ base unit Managed Wireless Access Point Power Cord CD-ROM with Manual Ethernet Cable Power Adapter-DC 48V, 0.4A...
Installing the Hardware Connect one end of an Etherne cable (included with your Step 1 package) to the LAN port on the DWL-300AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. Step 2 Connect another Ethernet cable from the DATA IN port on the PoE base unit to your router/switch or...
Page 4
Mounting Plate Assembly Installing the Hardware DWL-300AP Install Guide Step 1: Insert provided wall anchors in the wall where the mounting plate will be at- tached. Step 2: Use the provided screws to secure the mounting plate on the wall. DWL-300AP Install Guide...
Page 5
Step 3: Attach the remaining screws securely to the back of the DWL-300AP. Step 4: Attach the DWL-300AP to the mounting plate. DWL-300AP Install Guide...
Page 6
Installing the Hardware DWL-300AP Install Guide Step 5: Slide the DWL-300AP down into the grooves on the mounting plate to secure it to the plate. DWL-300AP Install Guide...
Page 7
Your Setup is Complete When you have completed the steps in this Installation Guide and configured your DWL-300AP for your network, your network should look similar to this: DWL-300AP Install Guide...