Update the TV software Change TV preferences Access decoder channel Reset the TV to factory settings Automatically install channels Manually install channels Rename channels Rearrange channels Back connectors Side connectors Connect a computer Use Philips EasyLink Use a Kensington lock...
Page 5
Remove fuse cover and fuse. The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. Refit the fuse cover. In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable.
TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility • Never expose the TV to rain or water.
Page 7
• When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or Your product is designed and manufactured antenna cable.
Page 8
flower– www.ecolabel.eu You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-efficient use. This TV was awarded the European Ecolabel for its environmental qualities.
Page 9
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. This section gives you an overview of commonly used TV controls and functions. • Switches the TV to standby if it is on.
Page 10
Selects tasks or options. Switches between channel grid and programme list. UK only: Enables audio commentary for Enables or disables subtitles. the visually handicapped. Toggles the demonstration menu on or Accesses options relating to the current off. activity or selection. Selects a picture format.
Page 11
• Press on the remote control or on the side of the TV. This section helps you perform basic TV • Enter a channel number using the operations. • Press to use the channel grid. • Press on the remote control to return to the previous channel.
Page 12
• Switch on the device before selecting it as a source on the TV. Press » The main index page appears. Select a page as follows: • Press the to enter a page number • Press to view the next or previous page •...
Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Menus help you to install channels, change picture and sound settings and access other • When watching TV or using external devices, press then select features.
Page 14
• : Adjusts the viewing area. (when set to maximum, you might see Press noise or a rough edge of an image.) Select and press • : Adjusts the picture horizontally for PC-VGA or HDMI input. Press to select the following •...
Page 15
: (Not for HD and PC mode) Press Displays 4:3 pictures over Press to select and press the full area of the screen, with sub-titles visible. Part Press to select the following of the top of the picture is settings. clipped off.
Page 16
Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels. Access the teletext features through the Press teletext options menu. » The teletext screen appears. Press »...
Page 17
You can exit a favourite list, and view all installed channels. When watching TV, press » The channel grid appears. When watching TV, press » The channel grid appears. Press to select a channel to remove. Press » The channel options menu appears. Press Select , then press...
• : Sets the time to switch on the TV. • : Selects the You can set timers to switch the TV to standby channel or the connected device. at a specified time. Press to exit. • Set the TV clock before you use timers. •...
Enter your code using » menu appears. Philips continuously tries to improve its Press to select products and we recommend that you update Press to confirm. the TV software when updates are available. » All channels and connected devices are Check www.philips.com/support for availability.
Page 20
Press to select , then press to enter. Select one channel to map to the decoder/descrambler channel and press • Follow this procedure to avoid damage to your USB storage device. to confirm. Select , then press to enter. Wait for five seconds before you Select ), the connector disconnect the USB storage device.
Page 21
Select , then press to re-install channels. • To stop searching, select press The first time you set up your TV, you are Press when installation is complete. prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels.
Page 22
When watching TV, switch to the channel that you want to skip. Press Press to select > Press > Press to select > > » menu appears. » menu Press to select , then press appears. to enter. Press to select , then Press to manually enter...
You can rename channels. The name appears After you install channels, you can rearrange the when you select the channel. order in which they appear. When watching TV, press to display When watching TV, press to display the channel grid. the channel grid.
Digital audio and video input from high- definition digital devices such as Blu-ray players. This section describes how to connect devices with different connectors. Examples are provided in the Quick Start. • You can use different types of connectors to connect a device to your TV.
Page 25
Audio and video input from a computer. Signal input from an antenna, cable or satellite. PC AUDIO IN/ PC IN(AUDIO) TV ANTENNA For use by service personnel only. Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.
Page 26
Audio input from analogue devices connected to Composite video input from analogue devices such as VCRs. Data input from USB storage devices. Stereo audio output to headphones or earphones.
Page 27
• • Set the screen refresh rate on your PC AUDIO IN/ PC IN(AUDIO) computer to 60Hz. • Select a supported screen resolution on your computer. • Connections via DVI or VGA require an additional audio cable. • • PC AUDIO IN/ PC IN(AUDIO) •...
The EasyLink-compliant device must be switched on and selected as the source. • Philips does not guarantee 100% interoperability with all HDMI CEC devices. • Do not enable Philips EasyLink if you do not intend to use it. Press Press to select >...
Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz To mount the TV, purchase a Philips TV mount. • 1024 x 768 - 60Hz To prevent damage to cables and connectors, • 1280 x 768 - 60Hz be sure to leave a clearance of at least 2.2...
Page 30
Design and specifications are subject to change without notice. • Without TV stand • Dimension (WxHxD): 455 x 303.7 x 56 (mm) • Weight: 3.16 kg • With TV stand • Dimension (WxHxD): 455 x 328.7 x 137.9 (mm) • Weight: 3.32 kg •...
Page 31
TV. cable. If the blinking reoccurs, contact Loudspeakers, unearthed audio devices, Philips Consumer Care. neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception Enter ‘8888’.
Page 32
Check that the volume is not set to 0. If the problem remains unresolved, contact Check that the sound is not muted. Philips Consumer Care in your country as listed in this user manual. Check that the sound settings are correctly set.
Page 33
add to home menu connect fine-tune watch teletext 10, 14 27, 5 resolution disable enable favourites list one-touch play fine-tune one-touch standby grid install automatic manual list lock 17, 16 rename reorder/rearrange skip channels create list switch view list troubleshooting tune 20, 20 lock channels...
Page 34
troubleshoot batteries 27, 5 overview favourites list technical specifications country home or shop Kensington lock lock channels lock connected devices PIN code picture sound main menu teletext 11, 13 version 16, 16 channels connect 25, 30 on and off resolution source change troubleshooting...