hit counter code
Toshiba 5000 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite 5000 Series
  6. User manual
Toshiba 5000 Series User Manual

Toshiba 5000 Series User Manual

Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
TOSHIBA 5000 Series
Portable Personal Computer
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 5000 Series

Summary of Contents for Toshiba 5000 Series

  • Page 1 TOSHIBA 5000 Series Portable Personal Computer User’s Manual...
  • Page 2 © 2001 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the informa- tion contained herein.
  • Page 3 Matsushita CD-RW/DVD-ROM drive UJDA710 safety instruction CAUTIONS: 1. The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. 2.
  • Page 4 CAUTION: This appliance contains a laser CLASS 1 LASER PRODUCT system and is classified as a “CLASS 1 LASER APPAREIL Å LASER DE PRODUCT.” To use this model properly, read CLASSE 1 the instruction manual carefully and keep this LASER KLASSE 1 PRODUKT manual for your future reference.
  • Page 5 VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUST- MENTS OR PERFORMANCE OF PROCE- DURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS...
  • Page 6 TOSHIBA DVD-ROM drive SD-C2502 safety instruction CAUTIONS: 1. The DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 7 CAUTION: This appliance contains a laser CLASS 1 LASER PRODUCT system and is classified as a “CLASS 1 LASER APPAREIL Å LASER DE PRODUCT.” To use this model properly, read CLASSE 1 the instruction manual carefully and keep this LASER KLASSE 1 PRODUKT manual for your future reference.
  • Page 8 VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR AD- JUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN...
  • Page 9 Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 10: Type Of Service

    Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan Region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made.

  • Page 11: Telephone Company Procedures

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.
  • Page 12 Instructions for IC CS-03 certified equipment The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
  • Page 13 Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compli- ance with Austel standards when the region selection is set to Australia. The use of other region setting while the modem is attached to the Australian PSTN would result in your modem being operated in a non-compliant manner.
  • Page 14 Some parameters required for compliance with Telecom’s PTC Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next.

  • Page 15: General Conditions

    The preferred method of dialing is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialing. If for some reason you must use decadic dialing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand “Reverse Dialing”...

  • Page 16: Wireless Interoperability

    Information to Wireless LAN User Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any Wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and...

  • Page 17: Regulatory Information

    Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documen- tation that comes with the product.
  • Page 18 Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en 11 (2462 MHz). Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. Voor publiek gebruik buiten gebouwen is licentie van BIPT/IBPT verplicht.

  • Page 19: Interference Statement

    This device must accept any interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 20 Consult the dealer or an experienced radio/TV technician for help. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA .
  • Page 21 2 In case that RF interference occurs to Other Radio Stations from this equipment, please change promptly the frequency for use, place to use, or stop emitting Radio. 3 Please contact TOSHIBA Direct PC if you have a problem, such as interference from this equipment to Other Radio Stations. Indication The indication shown below appears on this equipment.

  • Page 22: Device Authorization

    Do not remove the authorization label from the device. Information to Bluetooth user Bluetooth wireless technology Interoperability Bluetooth™ modules from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth Specification Ver.1.1, as defined and approved by The Bluetooth...

  • Page 23: Bluetooth Wireless Technology And Your Health

    Europe or www.pcsupport.TOSHIBA.com in the United States for more information. 2. When you use Bluetooth™ modules from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth™ modules from TOSHIBA, always change the frequency, move your PC to the area outside of the interference range of 2.4 GHz...

  • Page 24: Regulatory Statements

    In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment.
  • Page 25 Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the authorization to operate this equipment. Using Bluetooth™ Module from TOSHIBA equipment in Japan In Japan, the frequency bandwidth of 2,400~2,483.5MHz for second generation low-...
  • Page 26 2 In case that RF interference occurs to Other Radio Stations from this equipment, please change promptly the frequency for use, place to use, or stop emitting Radio. 3 Please contact TOSHIBA Direct PC if you have a problem, such as interference from this equipment to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
  • Page 27 Electronic communication device authorization This device obtains the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law. The following restrictions apply: Do not disassemble or modify the device. Do not remove the authorization label from the device.

  • Page 28: Table Of Contents

    Contents Preface Manual contents ................xxxv Conventions .................. xxxvi Abbreviations ................... xxxvi Icons ....................xxxvi Keys ....................xxxvi Key operation ................. xxxvii Display ................... xxxvii Messages ..................xxxvii General Precautions Stress injury .................. xxxix Heat injury ..................xxxix Pressure or impact damage ............xxxix PC Card overheating ................
  • Page 29 Optical media .................. 2-12 CD-RW/DVD-ROM drive ..............2-12 DVD-ROM drive ................2-13 AC adaptor ..................2-14 Chapter 3 Getting Started Setting up your work space .............. 3-1 General conditions ................3-2 Placement of computer ............... 3-2 Seating and posture ................3-3 Lighting ....................
  • Page 30 Before writing ..................4-10 When writing or rewriting ..............4-11 Media care ..................4-12 CD/DVDs..................4-12 Diskettes ..................4-13 Modem ....................4-13 Region selection ................4-13 Properties menu ................4-14 Connecting ..................4-15 Disconnecting ................... 4-16 Wireless communications ............... 4-16 Wireless LAN ...................
  • Page 31 DC IN indicator ................... 6-3 Power indicator ................... 6-3 Battery types ..................6-3 Battery pack ..................6-4 Real Time Clock battery ..............6-4 Care and use of the battery pack............6-5 Safety precautions ................6-5 Charging the batteries ................ 6-6 Monitoring battery capacity ..............
  • Page 32 Memory expansion ................8-8 Installing memory module ..............8-9 Removing memory module ..............8-10 Additional battery pack ..............8-11 Additional AC adaptor ..............8-11 External monitor ................8-12 TV ...................... 8-12 i.LINK (IEEE1394) ................8-13 Precautions ..................8-13 Connecting ..................8-13 Disconnecting ...................
  • Page 33 Bluetooth ..................9-21 TOSHIBA support ................9-21 Before you call ................. 9-21 Where to write .................. 9-21 Appendixes Specifications ................... A-1 Display Controller and Modes ............B-1 AT Commands .................. C-1 S-registers ..................D-1 V.90 ....................E-1 Internal Modem Guide ..............F-1 Wireless LAN ..................

  • Page 34: Preface

    This manual tells how to set up and begin using your 5000 series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 35: Conventions

    User's Manual Chapter 5, The Keyboard, describes special keyboard functions including the keypad overlay and hotkeys. Chapter 6, Power and Power-Up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program.

  • Page 36: Key Operation

    Conventions Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C. If three keys are used, hold down the first two and at the same time press the third.
  • Page 37 User's Manual xxxviii...

  • Page 38: General Precautions

    User's Manual General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 39: Pc Card Overheating

    PC Card overheating Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is used extensively. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time.

  • Page 40: Chapter 1 Introduction

    Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items: 5000 Series Portable Personal Computer Universal AC adaptor and power cord USB diskette drive Modular cable...

  • Page 41: Features

    • End User License Agreement Product Recovery CD-ROM Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Comple- mentary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits:...
  • Page 42 Features AC adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord. Because it is universal, it can receive a range of AC voltage from 100 to 240 volts; however, the output current varies among different models.

  • Page 43: Touch Pad

    User's Manual For reading, this drive supports the same formats as the DVD-ROM drive. • CD-ROM • CD-EXTRA • Audio CD • CD-R • Photo CD™ • CD-RW • DVD-ROM • DVD-Video Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability.
  • Page 44 DVD-ROM or CD-RW/DVD-ROM drives as a stand- alone audio CD player. You can also use the buttons to control the computer’s DVD video player and TOSHIBA Media player when the system is on. S/PDIF and Sony/Phillips Digital Interface Format connection main-...
  • Page 45 Security Security lock slot Connects an optional security lock to anchor the computer to a desk or other large object Software Standard Windows XP operating system and TOSHIBA Utilities and drivers preinstalled on the hard disk.

  • Page 46: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
  • Page 47 This feature lets you save battery power. You can specify the Power Save Mode in the Running on batteries item of the Power Save Modes window in TOSHIBA Power Saver. Panel power off This feature turns power to the computer off when the display panel is closed.

  • Page 48: Utilities

    Power Saver Utility To access this power savings management program, open the Control Panel and select the TOSHIBA Power Saver icon. HW Setup This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use.

  • Page 49: Options

    Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. AC adaptor If you use your computer at more than one site frequently, it may be convenient to purchase an additional AC adaptor for each site so you will not have to carry the adaptor with you.

  • Page 50: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position. IRELESS IRELESS NFRARED...
  • Page 51 Begins or pauses play. Stop button: Halts play. Next button: Plays the next track/chapter/data. Refer to Chapter 4, Operating Basics. NOTE: If Random or Shuffle is selected in TOSHIBA Media Player, selecting Next or Previous advances to a random selection.

  • Page 52: Left Side

    Left side Left side Figure 2-2 shows the computer’s left side. PC C ECURITY LOCK CARD INDICATOR CARD SLOT XTERNAL MONITOR PORT PORT MART MEDIA MART MEDIA CARD SLOT INDICATOR Figure 2-2 The left side of the computer Security lock A security cable attaches to this slot.

  • Page 53: Right Side

    User's Manual SmartMedia slot SmartMedia flash-memory cards are used in a wide variety of external devices. This slot lets you transfer data from the device to your computer. An indicator on the right side of the slot glows when a card is being accessed. CAUTION: Keep foreign objects out of the SmartMedia slot.

  • Page 54: Back Side

    Back side Volume control Use this dial to adjust the volume of the stereo speakers and subwoofer or the stereo headphones. S/PDIF and This jack lets you connect digital speakers or a stereo Headphone jack headphone (16 ohm minimum). When you connect a digital speaker or headphones, the internal speaker is automatically disabled.
  • Page 55 User's Manual Video-out and Plug a mini-jack TV adaptor cable into this jack for both Line-out jack line-out and video-out. The TV adaptor cable carries video as well as audio data for left and right speakers. Video-out features must be set in Display Properties in the Windows Control Panel.

  • Page 56: Underside

    Underside Underside Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer. XPANSION EMORY ATTERY COVER ATTERY LATCH Figure 2-5 The underside of the computer Expansion Use this socket to install a memory module to increase memory socket your computer’s memory by 128 or 256 MB.

  • Page 57: Front With The Display Open

    Position the display at a comfortable viewing angle. ISPLAY SCREEN ISPLAY HINGE TEREO SPEAKER RIGHT TOSHIBA C ONSOLE BUTTON NTERNET BUTTON TEREO SPEAKER LEFT OWER BUTTON...

  • Page 58: System Indicators

    TOSHIBA Console Press this button to launch an application automatically. button The default is TOSHIBA Console. Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system.

  • Page 59: Keyboard Indicators

    User's Manual Battery The Battery indicator indicates the condition of the battery’s charge: Green indicates full charge, orange indicates battery charging and flashing orange indicates a low battery charge. Refer to Chapter 6, Power and Power- Modes. Built-in HDD This indicator glows green when the computer is access- ing the hard disk.

  • Page 60: Usb Diskette Drive

    USB diskette drive USB diskette drive A 3 1/2" diskette drive accommodates 1.44-megabyte or 720-kilobyte diskettes. It connects to the USB port. NDICATOR ISKETTE SLOT JECT BUTTON Figure 2-10 USB diskette drive Disk-In-Use This indicator lights when the diskette is being accessed. Indicator Diskette slot Insert diskettes in this slot.

  • Page 61: Optical Media

    User's Manual Optical media CD-RW/DVD-ROM drive JECT BUTTON JECT HOLE CD-RW/DVD-I NDICATOR Figure 2-11 The CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.

  • Page 62: Dvd-Rom Drive

    Optical media CD-RW/DVD-ROM drives and media are manufactured according to the specifica- tions of six marketing regions. When you purchase DVD media, make sure it matches your drive, otherwise it will not play properly. Code Region Canada, United States Japan, Europe, South Africa, Middle East Southeast Asia, East Asia Australia, New Zealand, Pacific Islands, Central America, South America, Caribbean...

  • Page 63: Specifications

    Power and Power-Up Modes for details. Figure 2-13 The AC adaptor CAUTION: Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The current rating for the computer is 5.0 amperes. 2-14...

  • Page 64: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Setting up your work space — for your health and safety Connecting the AC adaptor Opening the display Turning on the power Starting up for the first time Turning off the power Restarting the computer...

  • Page 65: General Conditions

    User's Manual General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. Make sure there is adequate space around the computer for proper ventilation. Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.

  • Page 66: Seating And Posture

    Setting up your work space Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips and to figure 3-1. ELOW EYE LEVEL ANGLES OOT REST...

  • Page 67: Lighting

    User's Manual Lighting Proper lighting can improve legibility of the display and reduce eye strain. Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare.

  • Page 68: Connecting The Ac Adaptor

    Power and Power-Up Modes. CAUTION: Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The current rating for the computer is 5.0 amperes. 1. Connect the power cord to the AC adaptor.

  • Page 69: Opening The Display

    User's Manual 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators aligned with the display hinges should glow. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1.

  • Page 70: Turning Off The Power

    Turning off the power 2. Press and hold the computer’s power button for two or three seconds. Figure 3-5 Turning on the power Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode.

  • Page 71: Hibernation Mode

    NOTE: For the computer to shut down in hibernation mode, the hiberna- tion feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window.

  • Page 72: Standby Mode

    Press the power button. Close the lid. First, however, make the appropriate settings according to the steps below. 1. Open the Windows Control Panel and click the TOSHIBA Power Saver icon. 2. Select the Hibernate window, select the Enable Hibernate support check box and click the Apply button.
  • Page 73 2. Close the display panel. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel and click the TOSHIBA Power Saver icon. Press the power button. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel and click the TOSHIBA Power Saver icon.

  • Page 74: Restarting The Computer

    1. Load the Product Recovery CD-ROM in the drive and turn off the computer’s power. 2. Hold down the C key and turn on the power. When In Touch with Tomorrow TOSHIBA appears, release the C key. 3. Follow the on-screen instructions. 3-11...
  • Page 75 User's Manual 3-12...

  • Page 76: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad, USB diskette drive, DVD-ROM drive, CD-RW/DVD-ROM drive, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer and on heat dispersal. Using Touch Pad To use the Touch Pad, simply press and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 77: Using The Usb Diskette Drive

    User's Manual Using the USB diskette drive A 3 1/2" diskette drive connects to the computer’s USB port. It accommodates 1.44-megabyte or 720-kilobyte diskettes. Refer to Chapter 2, Grand Tour, for more information. Connecting 3 1/2" diskette drive To connect the drive, plug the diskette drive connector into a USB port. Refer to Figure 4-2.

  • Page 78: Using Optical Media Drives

    Using optical media drives Using optical media drives The text and illustrations in this section refer primarily to the DVD-ROM drive. However, operation is the same for the CD-RW/DVD-ROM drive. The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation.
  • Page 79 User's Manual b. Pressing the eject button will not open the drawer when the DVD-ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 1.5 cm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 80 Using optical media drives 3. Lay the CD/DVD, label side up, in the drawer. Figure 4-6 Inserting a CD/DVD CAUTION: Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 4.

  • Page 81: Removing Disks

    User's Manual 5. Push the center of the drawer to close it. Press gently until it locks into place. CAUTION: If the CD/DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button.

  • Page 82: Sub Lcd

    Sub LCD 2. The CD/DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD gently and lift it out. Figure 4-8 Removing a CD/DVD 3. Push the center of the drawer to close it. Press gently until it locks into place. Sub LCD This section describes the sub LCD.

  • Page 83: Status

    User's Manual Status The center panel displays the following: Time CD/DVD track /time Power messages: Status Display Welcome! See you! STANDBY or HIBERNATION Zzz… RESUME Wake up! Right The right side shows the battery charge level. Audio/video controls This section describes how to use the audio/video control buttons. You do not have to turn on the computer’s operating system to play audio CD/DVDs.

  • Page 84: Cd/Dvd Control And Digital Audio Control

    NOTE: To play Digital Audio Data, you must set the play list in the TOSHIBA Media Player. The next time you play Digital Audio Data in succession, the former play list will become active. If a CD was played the previous time, then All Audio will be used.

  • Page 85: Next And Previous Buttons

    Previous Press the icon to advances to the next track, chapter or data. NOTE: If Random or Shuffle is selected in TOSHIBA Media Player, selecting Next or Previous advances to a random selection. Play/Pause and Stop buttons A single button on a rocker controls the Play/Pause and Stop functions.

  • Page 86: When Writing Or Rewriting

    Writing CDs We recommend that you use the following makers CD-R and CD-RW. When you use the media the quality of which may be problematic, chances of failure to write or rewrite will increase. CD-R: TAIYOYUDEN CO., LTD. TDK Corporation Mitsui Chemicals Inc.

  • Page 87: Media Care

    User's Manual DO NOT take the following actions : • Operation of PC machine such as moving a mouse or AccuPointII, closing/ opening LCD and similar operation. Starting up communication application such as a modem or giving shock or vibration to PC machine. •...

  • Page 88: Diskettes

    Modem 6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the CD/ DVD. If necessary, use a cloth dampened in water or a neutral cleaner. Do not use benzine, thinner or similar cleaner.

  • Page 89: Properties Menu

    User's Manual To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. NOTE: Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/Region in the Control Panel, the change may not take effect.

  • Page 90: Connecting

    Modem Setting You can enable or disable the following settings: AutoRun Mode The region-selecting utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.

  • Page 91: Disconnecting

    User's Manual 2. Plug the other end of the modular cable into a telephone jack. Figure 4-11 Connecting the internal modem Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector.

  • Page 92: Bluetooth Wireless Technology

    Web site http://www.TOSHIBA-europe.com/computers/tnt/ bluetooth.htm in Europe or www.pcsupport.TOSHIBA.com in the United States for more information. 2. When you use Bluetooth™ modules from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth™...

  • Page 93: Wireless Communication Switch

    User's Manual Bluetooth wireless technology has the following features: Worldwide operation The Bluetooth radio transmitter and receiver operates in the 2.45 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices. The link is maintained even if the devices are not within line of sight.

  • Page 94: Lan

    W-LAN. Open or click the following: start, Control Panel, System, Hardware Device Manager, Network adapters, TOSHIBA Wireless LAN Mini PCI Card and enable. The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-Tx).

  • Page 95: Disconnecting Lan Cable

    User's Manual 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-12 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.

  • Page 96: Cleaning The Computer

    Moving the computer Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 97: Heat Dispersal

    Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling method item of the Power Save Mode window in TOSHIBA Power Saver. When the CPU temperature falls to a normal range, the fan is turned off and the CPU operation returns to standard speed.

  • Page 98: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 99: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
  • Page 100 Soft keys: Fn key combinations The keyboard is designed to provide all the features of the 101-key enhanced keyboard, shown in figure 5-1. The 101/102-key enhanced keyboard has a numeric keypad and scroll lock key. It also has additional Enter, Ctrl and Alt keys to the right of the main keyboard.

  • Page 101: Hotkeys

    User's Manual Hotkeys Hotkeys (Fn + a function or Esc key) let you enable or disable certain features of the computers. Sound mute: Pressing Fn + Esc in a Windows environment turns sound on or off. When you press these hotkeys, the current setting will change and be displayed as an icon.
  • Page 102 Soft keys: Fn key combinations Standby: Press Fn + F3 to change the Standby mode setting. When you press these hotkeys, the current setting will be displayed in a dialog box that will let you select Yes or No to accept or cancel the displayed setting. A check box lets you select whether to hide or display the dialog box.

  • Page 103: Fn Sticky Key

    Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to...

  • Page 104: Windows Special Keys

    Keypad overlay Windows special keys The keyboard provides two keys that have special functions in Windows : one activates the start menu and the other has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the secondary mouse button.

  • Page 105: Temporarily Using Normal Keyboard (Overlay On)

    User's Manual Numeric mode To turn on the Numeric mode, press Fn + F11. The Numeric mode F11 indicator lights. Now try numeric data entry using the keys in figure 5-2. Press Fn + F11 again to turn off the overlay. Figure 5-2 The numeric keypad overlay Temporarily using normal keyboard (overlay While using the overlay, you can temporarily access the normal keyboard without...

  • Page 106: Temporarily Using Overlay (Overlay Off)

    Generating ASCII characters 3. Release Fnto continue using the overlay. Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay.
  • Page 107 User's Manual 5-10...

  • Page 108: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.

  • Page 109: Power Indicators

    DC IN off For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. Power indicators As shown in the above table, the Battery, DC IN and Power indicators on the system indicator alert you to the computer’s operating capability and battery charge...

  • Page 110: Dc In Indicator

    Battery types Green Indicates the AC adaptor is connected and the battery is fully charged. No light Under any other conditions, the indicator does not light. DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Green Indicates the AC adaptor is connected and supplying...

  • Page 111: Battery Pack

    CAUTION: The computer’s RTC battery is a nickel metal hydride (NiMH) battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required...

  • Page 112: Care And Use Of The Battery Pack

    Care and use of the battery pack Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.

  • Page 113: Charging The Batteries

    Hibernation mode (so you don’t lose data) and automatically turns off. NOTE: The computer enters Hibernate mode only if Hibernation is enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window.

  • Page 114: Monitoring Battery Capacity

    How you configure the computer (for example, whether you enable battery- power saving options). The computer provides a battery save mode, which can be set in TOSHIBA Power Saver, to conserve battery power. This mode has the following options: • Processor speed •...

  • Page 115: Retaining Data With Power Off

    User's Manual • System hibernate • Turn off monitor • Turn off hard disks How often and how long you use the hard disk, CD/DVD-ROM and the diskette drive. How much charge the battery contained to begin with. How you use optional devices, such as a PC Card, to which the battery supplies power.

  • Page 116: Removing The Battery Pack

    Replacing the battery pack You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. This section explains how to remove and install the battery pack. Removing the battery pack To replace a discharged battery, follow the steps below.

  • Page 117: Installing The Battery Pack

    CAUTION: For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. Installing the battery pack To install a battery, follow the steps below.

  • Page 118: Starting The Computer By Password

    Power-up modes Starting the computer by password If you registered a password as supervisor or user, you must enter it to start the computer. For more information about how to set a password, refer to Chapter 7, HW Setup and Passwords.

  • Page 119: Windows Utilities

    User's Manual Windows utilities You can specify the setting in TOSHIBA Power Saver. Hotkeys You can use hotkeys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation. See Chapter 5, Keyboard for details. Panel power off You can set up your computer so that power turns off automatically when you close the display panel.

  • Page 120: Chapter 7 Hw Setup And Passwords

    Chapter 7 HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup lets you configure settings for general, password and boot priority.

  • Page 121: Hw Setup Window

    User's Manual HW Setup window The HW Setup window contains the following tabs: Boot Priority, General and Password. Figure 7-1 HW setup window There are also three buttons: OK, Cancel and Apply. Accepts your changes and closes the HW Setup window. Closes the window without accepting your changes.
  • Page 122 HW Setup About Click About to display the HW Setup version. Password User Password This option allows you to set or reset the user password for power on. Change or remove the password. (Default) Not Registered Set the password. A dialogue box will appear to let you Registered set the password.
  • Page 123 User's Manual 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** NOTE: If you click the OK button before entering the password, Registered will appear on the display. 3.

  • Page 124: Boot Priority

    HW Setup 2. Set a diskette’s write-protect tab to the write enable position and insert the diskette in the drive. NOTE: All data on the diskette will be destroyed. 3. Turn on the computer’s power. Password= will be displayed on the Sub-LCD. 4.

  • Page 125: Supervisor Password

    HW Setup. Supervisor password Refer to the readme file of the Supervisor Password Utility for instructions on setting the Supervisor Password. The path to the readme file is C:\Program Files\TOSHIBA\Windows Utilities\SVPWTool. In the SVPWTool directory, open the readme.htm file.

  • Page 126: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following types of devices: Cards/memory PC Cards SmartMedia SD Cards Memory modules Power devices Additional battery pack Additional AC adaptor Peripheral devices External monitor i.LINK (IEEE1394)

  • Page 127: Pc Cards

    5 mm Type II cards or one 10.5 mm Type III card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards.

  • Page 128: Removing A Pc Card

    PC Cards Removing a PC Card 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Point to the PC card you want to remove and click. 3. Press the eject button of the PC card you want to remove to extend the button. 4.

  • Page 129: Smartmedia Slot

    User's Manual SmartMedia slot This slot accommodates 3.3 V and 5.0 V SmartMedia (RAM) from 2 MB to 128 You cannot use SmartMedia that does not conform to SSFDC specifications. Operation of SmartMedia developed after the computer was manufactured is not guaranteed.
  • Page 130 SmartMedia slot Inserting 1. To insert SmartMedia, turn the card so that the connector (metal area) faces 2. Push the card into the slot until it locks into place. NOTE: If Windows does not recognize a SmartMedia card, try removing the card and inserting it again.

  • Page 131: Smartmedia Care

    User's Manual 3. Lift the left side of the computer slightly and grasp the card. Pull it straight out. Figure 8-4 Removing a SmartMedia SmartMedia care 1. SmartMedia are consumable items, so make sure you back up important data. 2. Do not twist or bend SmartMedia. 3.

  • Page 132: Installing An Sd Card

    SD Cards Installing an SD card To install an SD card, follow the steps below. 1. Insert the SD card. 2. Press gently to ensure a firm connection. Figure 8-5 Inserting an SD card Removing an SD card To remove an SD card, follow the steps below. 1.

  • Page 133: Sd Card Care

    User's Manual SD card care CAUTION: Set the write-protect switch to the lock position, if you do not want to record data. 1. Do not write to an SD card if the battery power is low. Low power could affect writing accuracy. 2.

  • Page 134: Installing Memory Module

    Memory expansion Installing memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes).

  • Page 135: Removing Memory Module

    User's Manual 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Figure 8-8 Installing a module 8. Seat the cover and secure it with two screws. 9. Replace the battery pack as described in Chapter 6, Power and Power-Up Modes.

  • Page 136: Additional Battery Pack

    External monitor 5. Grasp the module and pull it out. CAUTION: Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Figure 8-9 Removing the memory module 6. Seat the cover and secure it with two screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs.

  • Page 137: External Monitor

    User's Manual External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2.

  • Page 138: I.link (Ieee1394)

    i.LINK (IEEE1394) i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as Digital video cameras Hard disk drives MO drives CD-RW drives NOTE: i.LINK uses a four-pin connector, which does not carry electric current.

  • Page 139: Disconnecting

    User's Manual Disconnecting 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. NOTE: Refer also to the documentation that came with your i.LINK device. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer.

  • Page 140: Chapter 9 Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 141: Analyzing The Problem

    User's Manual Check that your diskette or CD/DVD-ROM is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster.

  • Page 142: Hardware And System Checklist

    Hardware and system checklist Hardware If you cannot find a software problem, check your hard- ware. First run through the items in the preliminary checklist above. If you still cannot correct the problem, try to identify the source. The next section provides checklists for individual components and peripherals.

  • Page 143: Self Test

    If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the TOSHIBA logo.

  • Page 144: Overheating Power Down

    Hardware and system checklist Overheating power down If the computer’s internal temperature becomes too high, the computer will automati- cally shut down. Problem Procedure Computer shuts down Leave the computer off until the computer and DC IN indicator reaches room temperature, then turn it back on. blinks orange If the computer is still too warm, the DC IN indicator will continue blinking when you turn on...
  • Page 145 If you do not think the battery is at the end of its operating life, see your dealer. Battery doesn't Check the power consumption settings in power the computer TOSHIBA Power Saver Utility. Consider using a as long as expected power saving mode.

  • Page 146: Password

    Hardware and system checklist Password If you forgot your password, contact your dealer. Problem Procedure Cannot enter Refer to the Password security section in password Chapter 7, HW Setup and Passwords . Hotkeys Refer to Chapter 5, The Keyboard for information on using hotkeys. Make sure the operation is correct and try a few hotkey combinations.

  • Page 147: Lcd Panel

    User's Manual If you are still unable to use the keyboard, consult your dealer. LCD panel Problem Procedure No display Press hotkeys Fn + F5 to change the display priority, to make sure it is not set for an external monitor.

  • Page 148: Dvd-Rom Drive

    Hardware and system checklist Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk.

  • Page 149: Cd-Rw/Dvd-Rom Drive

    User's Manual Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM: Audio CD, CD-ROM, Photo CD, CD- EXTRA, CD-R (read only), CD-RW (read only) Check the region code on the DVD. It must match that on the DVD-ROM drive.
  • Page 150 Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: • Use only media recommended by TOSHIBA. • Do not use the mouse or keyboard during writing. • Use only the software supplied with the computer for recording.

  • Page 151: Smartmedia Slot

    User's Manual SmartMedia slot For more information, refer to Chapter 8, Optional Devices. Problem Procedure You cannot insert Make sure the card is properly oriented. Insert a SmartMedia card the edge with the notched corner first and make sure the connector (metal area) faces down. You cannot write Make sure the card is not write protected.

  • Page 152: Sd Card

    Hardware and system checklist SD Card Refer also to Chapter 8, Optional Devices. Problem Procedure SD Card Reseat the SD Card to make sure it is firmly error occurs connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation.

  • Page 153: Infrared Port

    User's Manual Infrared port Refer also to the documentation for your IrDA compatible device and related software. Problem Procedure Infrared devices do Make sure there is no obstruction blocking not work as expected communication between the computer and the target device. If problems persist, contact your dealer.
  • Page 154 Hardware and system checklist 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. If problems persist, contact your dealer. USB mouse Problem Procedure On-screen pointer The system might be busy.

  • Page 155: Usb

    User's Manual The mouse pointer The mouse might be dirty. Refer to your mouse moves erractically documentations for instructions on cleaning. If problems persist, contact your dealer. Refer also to your USB device’s documentation. Problem Procedure USB device does Check for a firm cable connection between the not work USB ports on the computer and the USB device.

  • Page 156: Sound System

    Hardware and system checklist 4. Replace the battery and/or connect the AC adaptor. 5. Turn on the power. If problems persist, contact your dealer. Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Adjust the volume control dial.

  • Page 157: I.link (Ieee1394)

    User's Manual Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. i.LINK (IEEE1394) Problem Procedure i.LINK device does Make sure the cable is securely connected to not function the computer and to the device.
  • Page 158 Hardware and system checklist You can also use the ATX command. Refer to the online help files for Appendix C, AT Com- mands. You place a call, Make sure the settings are correct in your but a connection communications application. can't be made After making a call Make sure the tone or pulse selection in your...

  • Page 159: Lan

    User's Manual You can also use the ATS0 command. Refer to the online help files for Appendix D, S-registers. If problems persist, contact your dealer. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN Make sure the AC adaptor is connected.

  • Page 160: Bluetooth

    If problems persist, contact your dealer. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
  • Page 161 User's Manual Outside of Europe Netherlands Australia TOSHIBA Information Systems, TOSHIBA (Australia) Pty, Ltd. Benelux B.V. Information Systems Division Rivium Boulevard 84-92 Talavera Road, 41 2909 LK Capelle a/d IJssel North Ryde, N.S.W. 2113 Sydney Spain Canada TOSHIBA Information Systems, ESPAÑA...

  • Page 162: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight typical 3.0 kilograms (models with XGA display and DVD-ROM drive) Size 330 (w) 273 (d) 35.9 (h) millimeters Environmental Requirements Ambient Relative Conditions temperature humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% Non-operating -20°C (-4°F) to 65°C (149°F)
  • Page 163 User's Manual Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication Data: Full duplex system Fax: Half duplex Communication...

  • Page 164: Display Controller And Modes

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) and Ultra Extended Graphics Array (UXGA) support for the internal LCD and external monitors.

  • Page 165: Video Modes

    User's Manual Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates.
  • Page 166 Appendix B Table1 Video modes (VGA) continued Video Type Resolution Character LCD Scanning mode matrix colors colors frequency (pels) Vertical (Hz) 320 x 200 8 x 8 16 of 256K 16 of 256K Grph Pels 640 x 200 8 x 8 16 of 256K 16 of 256K Grph...
  • Page 167 User's Manual Table 2 Video modes (XGA) Resolution Vertical colors colors frequency (Hz) 640 x 480 256/256K 256/256K 800 x 600 256/256K 256/256K 1024 x 768 256/256K 256/256K 1280 x 1024 256/256K 256/256K (Virtual) 1600 x 1200 256/256K 256/256K (Virtual) 1920 x 1440 256/256K 256/256K...
  • Page 168 Appendix B Table 2 Video modes (XGA) continued Resolution Vertical colors colors frequency (Hz) 640 x 480 64K/64K 64K/64K 800 x 600 64K/64K 64K/64K 1024 x 768 64K/64K 64K/64K 1280 x 1024 64K/64K 64K/64K (Virtual) 1600 x 1200 64K/64K 64K/64K (Virtual) 1920 x 1440 64K/64K...
  • Page 169 User's Manual Table 2 Video modes (XGA) continued Resolution Vertical colors colors frequency (Hz) 640 x 480 16M/16M 16M/16M 800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M 16M/16M (Virtual) 1600 x 1200 16M/16M 16M/16M (Virtual) 1920 x 1440 16M/16M...
  • Page 170 Appendix B Table 3 Video modes (Ultra XGA) Resolution Vertical colors colors frequency (Hz) 640 x 480 256/256K 256/256K 800 x 600 256/256K 256/256K 1024 x 768 256/256K 256/256K 1280 x 1024 256/256K 256/256K 1600 x 1200 256/256K 256/256K 1920 x 1440 256/256K 256/256K (Virtual)
  • Page 171 User's Manual Table 3 Video modes (Ultra XGA) continued Resolution Vertical colors colors frequency (Hz) 640 x 480 64K/64K 64K/64K 800 x 600 64K/64K 64K/64K 1024 x 768 64K/64K 64K/64K 1280 x 1024 64K/64K 64K/64K 1600 x 1200 64K/64K 64K/64K 1920 x 1440 64K/64K 64K/64K...
  • Page 172 Appendix B Table 3 Video modes (Ultra XGA) continued Resolution Vertical colors colors frequency (Hz) 640 x 480 16M/16M 16M/16M 800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M 16M/16M 1600 x 1200 16M/16M 16M/16M 1920 x 1440 16M/16M 16M/16M...
  • Page 173 User's Manual B-10...

  • Page 174: At Commands

    Appendix C AT Commands In most cases, you will not need to type AT commands manually. However, there might be some occasions when you will need to do so. This chapter describes AT commands for data mode. Fax and voice commands are taken care of by application software.
  • Page 175 User's Guide Answer command This command instructs the modem to go off-hook and answer an incoming call. Communication standard setting This command determines the communication standard CCITT or Bell. Selects CCITT V.22 mode when the modem is at 1200 bps. Selects Bell 212A when the modem is at 1200 bps (default).
  • Page 176 Appendix C Return to command mode. Causes the modem to return to command mode after dialing a number, without disconnecting the call. Dial a telephone number previously stored using the &Zn=X command (See &Zn=X command for more information). The range is 0-3. Echo command This command controls whether or not the characters entered from your computer keyboard are displayed on your monitor (echoed) while...
  • Page 177 User's Guide The following is an example of the ATI11 results. Description Status Last Connection V.90 Initial Transmit Carrier Rate 26400 Initial Receive Carrier Rate 50666 Final Transmit Carrier Rate 26400 Final Receive Carrier Rate 50666 Protocol Negotiation Result LAPM Data Compression Result V.42bis Estimated Noise Level...
  • Page 178 Appendix C Result Codes: n=0,3,4,9,11 ERROR Otherwise Monitor speaker volume This command sets speaker volume to low, medium, or high. Low volume. Low volume. (Same as L0) Medium volume (default). High volume. Result Codes: n=0,1,2,3 ERROR Otherwise Monitor speaker mode This command turns the speaker on or off.
  • Page 179 User's Guide When originating or answering, begin the handshake at the communication standard specified by S37 and the ATB command (default). During handshake, a lower transmission speed may be selected. Result Codes: n=0,1 ERROR Otherwise Return on-line to data mode Instructs the modem to exit on-line command mode and return to data mode (see Escape Sequence section).
  • Page 180 Appendix C Select tone dialing This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting. DCE response format This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents.
  • Page 181 User's Guide Enabled Enabled OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT <RATE>, RRING, NO BONGTONE, DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED Dial tone detect Disabled: The modem dials a call regardless of whether it detects a dial tone. Enabled: The modem dials only upon detection of a dial tone, and disconnects the call if the dial tone is not detected within...
  • Page 182 Appendix C &Cn Data Carrier Detect (DCD) control Data Carrier Detect is a signal from the modem to the computer indicating that a carrier signal is being received from a remote modem. DCD normally turns off when the modem no longer detects the carrier signal.
  • Page 183 User's Guide &Gn V.22bis guard tone control This command determines which guard tone, if any, to transmit while transmitting in the high band (answer mode). This command is only used in V.22 and V.22bis mode. This option is not used in North America and is for international use only.
  • Page 184 Appendix C &Wn Store current configuration Saves the current (active) configuration (profile), including S-Regis- ters. The current configuration comprises a list of storable parameters. These settings are restored to the active configuration upon receiving a Zn command or at power up. Refer to the &V command. &W0 Stores the current configuration as profile 0.
  • Page 185 User's Guide V.42, MNP, or buffer (default). The modem attempts to connect in V.42 error control mode. If this fails, the modem attempts to connect in MNP mode. If this fails, it will attempt to connect in MNP mode. If this also fails, the modem connects in buffer mode and continues operation.
  • Page 186 Appendix C View numbers in blacklist If blacklisting is in effect, this command displays the numbers that are currently blacklisted, failed or delayed. The ERROR result code appears in countries/regions that do not require blacklisting. %Cn Data compression control This command determines the operation of V.42bis and MNP class 5 data compression.
  • Page 187 User's Guide C-14...

  • Page 188: S-Registers

    Appendix D S-registers S-registers contain the settings that determine how a number of functions of the internal modem operate. For example, how many times to let the telephone ring before the modem answers and how long to wait before it hangs up if a connec- tion fails.
  • Page 189 User's Guide Ring counter This register is read only. The value of S1 is incremented with each ring. If no ring occurs over a six-second interval, this register is cleared. Range: 0-255 Default: 0 Units: rings AT escape character (user defined) This register determines the ASCII values used for an escape se- quence.
  • Page 190 Appendix D Command line editing character (user defined) This register sets the character recognized as a backspace and pertains to asynchronous only. The modem will not recognize the backspace character if it is set to a value that is greater than 32 ASCII. This character can be used to edit a command line.
  • Page 191 User's Guide Comma pause time This register sets the time, in seconds, that the modem must pause when it encounters a comma (,) in the dial command string. In some regions, S8 will set both wait before dialing and comma pause time. Range: 0-255 Default: 2 Units:...

  • Page 192: At Command Set Result Codes

    Appendix D S37 = 10 12000 bps S37 = 11 14400 bps S37 = 12 16800 bps S37 = 13 19200 bps S37 = 14 21600 bps S37 = 15 24000 bps S37 = 16 26400 bps S37 = 17 28800 bps S37 = 18 31200 bps...
  • Page 193 User's Guide CONNECT 7200 EC* Connection at 7200 bps CONNECT 12000 EC* Connection at 12000 bps CONNECT 16800 EC* Connection at 16800 bps CONNECT 300 EC* Connection at 300 bps CONNECT 21600 EC* Connection at 21600 bps CONNECT 24000 EC* Connection at 24000 bps CONNECT 26400 EC* Connection at 26400 bps...
  • Page 194 Appendix E V.90 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 195 User's Manual Table E-1 Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bps CONNECT 36000 EC* Connection at 36000 bps CONNECT 40000 EC* Connection at 40000 bps CONNECT 44000 EC* Connection at 44000 bps CONNECT 48000 EC* Connection at 48000 bps CONNECT 52000 EC*...
  • Page 196 Appendix E *EC stands for the Error Control method, which appears only when the extended result codes configuration option is enabled. EC is replaced by one of the follow- ing symbols, depending on the error control method used. V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol...
  • Page 197 User's Manual...

  • Page 198: Internal Modem Guide

    Appendix F Internal Modem Guide This appendix describes how to install and the remove the internal modem. CAUTION: Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described. Installing the internal modem NOTE: The internal modem is preinstalled.

  • Page 199: Removing The Internal Modem

    User’s Manual Removing the internal modem To remove the internal modem. 1. Remove the battery. 2. Remove the modem cover. 3. Remove the modem board. 4. Remove the modem jack. 5. Secure the modem cover. 6. Install the battery pack. Refer to the installation procedures for details.

  • Page 200: Wireless Lan

    Appendix G Wireless LAN In some markets, the computer is equipped with a Wireless LAN mini-PCI card that is compatible with other LAN systems based on Direct Sequence Spread Spectrum radio technology that complies with the IEEE 802.11 Standard (Revision B). It supports data transfer up to 11 Mbit/s.

  • Page 201: Radio Characteristics

    User’s Manual Table F-4 Networking Characteristics Compatibility IEEE 802.11 Standard for Wireless LANS (DSSS) Wi-Fi (Wireless Fidelity) certified by the Wireless Ethernet Compatibility Alliance (WECA) Network Microsoft Windows® Networking Operating System Host Microsoft Windows® 95: Operating NDIS3 Miniport Driver System Microsoft Windows®...
  • Page 202 NOTE: The range values listed in Table F-5 are typical distances as measured at the TOSHIBA Wireless LAN laboratories. These values provide rule-of-thumb guides. They may vary according to the actual radio conditions at the location where the Wireless LAN product is installed.
  • Page 203 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 2.4 GHz channels (see Table F-6). Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region.

  • Page 204: Ac Power Cord And Connectors

    Appendix H AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters Wire size:...

  • Page 205: Usa And Canada

    User's Manual The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe. USA and Canada United Kingdom UL approved BS approved CSA approved Australia Europe Approved by the AS approved appropriate agency...
  • Page 206 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. HDD: hard disk drive Abbreviations IDE: integrated drive electronics AC: alternating current I/O: input/output AGP: accelerated graphics port IrDA: Infrared Data Association ANSI: American National Standards Institute IRQ: interrupt request...
  • Page 207 AccuPoint analog signal: A signal whose (Abbreviations continued) characteristics such as amplitude and SVGA: super video graphics adaptor frequency vary in proportion to (are an TFT: thin-film transistor analog of) the value to be transmitted. Voice communications are analog UART: universal asynchronous signals.

  • Page 208: Cache Memory

    cache memory boot: Short for bootstrap. A program AUTOEXEC.BAT: A batch file that that starts or restarts the computer. executes a series of MS-DOS com- The program reads instructions from a mands and programs each time you storage device into the computer’s start the computer.
  • Page 209 capacity capacity: The amount of data that can chassis: The frame containing the be stored on a magnetic storage computer. device such as a diskette (floppy chip: A small semiconductor contain- disk) or hard disk. It is usually ing computer logic and circuitry for described in terms of kilobytes (KB), processing, memory, input/output where one KB = 1024 bytes and...
  • Page 210 delete CRT: Cathode Ray Tube. A vacuum components: Elements or parts (of a tube in which beams projected on a system) which make up the whole fluorescent screen-producing (system). luminous spots. An example is the computer program: A set of instruc- television set.
  • Page 211 device driver device driver: A program that controls driver: A software program, generally communication between a specific part of the operating system, that peripheral device and the computer. controls a specific piece of hardware The CONFIG.SYS file contains device (frequently a peripheral device such as drivers that MS-DOS loads when you a printer or mouse).
  • Page 212 See also servicing. Also called fixed disk. diskette. hard disk drive (HDD): An Fn-esse: A TOSHIBA utility that lets electromechanical device that reads you assign functions to hotkeys. and writes a hard disk. See also hard disk.
  • Page 213 3) such as speaker volume. The point of contact between user, the HW Setup: A TOSHIBA utility that computer, and the program, for lets you set the parameters for various example, the keyboard or a menu.
  • Page 214 menu Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of jumper: A small clip or wire that glass coated with transparent con- allows you to change the hardware ducting material. The viewing-side characteristics by electrically connect- coating is etched into character ing two points of a circuit.
  • Page 215 microprocessor numeric keypad overlay: A feature microprocessor: A hardware compo- that allows you to use certain keys on nent contained in a single integrated the keyboard to perform numeric entry, circuit that carries out instructions. or to control cursor and page move- Also called the central processing unit ment.
  • Page 216 (integers) both of which are either on other computers. or off; odd or even; 0 or 1. 2) In serial Power Saver Utility: A TOSHIBA communications, an error detection bit utility that lets you set the parameters that is added to a group of data bits for various power-saving functions.
  • Page 217 Class B peripheral devices. provides a more stringent classifica- tion for home equipment use. serial: The handling of data bits one TOSHIBA portable computers comply after the other. with Class B computing device serial communications: A communi- regulations.
  • Page 218 CRT display screen connected to to mean a Microsoft Windows the computer for data input/output. window. touch pad: A pointing device inte- write protection: A method for grated into the TOSHIBA computer protecting a diskette (floppy disk) palm rest. from accidental erasure. Glossary-13...
  • Page 219 Glossary Glossary-14...
  • Page 220 1-10, 8-11 location 2-4 replacing 6-8 problems 9-9 Bluetooth 1-6 using 4-3 problems 9-21 view 2-13 TOSHIBA Stack, utility 1-9 using 4-17 Boot mode 3-7 Environment 3-1 Boot priority 7-5 Equipment checklist 1-1 Equipment setup general conditions 3-2 Cache memory 1-2...
  • Page 221 User’s manual Ergonomics display brightness increase 5-6 lighting 3-4 display selection 5-5 seating and posture 3-3 hibernation 5-5 work habits 3-4 instant security 5-4 Expansion memory, See Memory power save mode 5-4 standby 5-5 wireless setting 5-6 problems 9-7 Fn + Alt (enhanced keyboard simula- sound mute 5-4 tion) 5-3 HW Setup 1-9, 7-1...
  • Page 222 Index typewriter keys 5-1 disconnecting 4-16 Windows special keys 5-7 jack 2-6 Keypad overlay 1-7, 5-7 problems 9-18 arrow mode 5-7 properties menu 4-14 numeric mode 5-8 region selection 4-13 temporarily using normal keyboard Monitor, external 2-3, 8-12 (overlay on) 5-8 problems 9-17 temporarily using overlay (overlay Moving the computer 4-21...
  • Page 223 2-6 seft test 9-4 line-in jack 1-6, 2-5 SmartMedia slot 9-12 microphone jack 1-6, 2-5 sound system 9-17 mute hotkeys 5-4 support from TOSHIBA 9-21 problems 9-17 system start-up 9-3 S/PDIF 1-5, 2-5 Touch Pad 9-14 speakers 2-9 USB 9-16...
  • Page 224 Index Standby 1-8 automatic 1-7 setting 3-9 Sub LCD 2-2, 4-7 TOSHIBA Console 1-6, 1-9 TOSHIBA Console button 2-9 TOSHIBA Control 1-9 Touch pad 1-4 problems 9-14 using 4-1 Troubleshooting, See Problems TV 8-12 USB 1-4 port location 2-3, 2-5...
  • Page 225 User’s manual Index-6...

Table of Contents