Sony PDW-HR1 Operation Manual page 149
Professional disc field station
Hide thumbs
Also See for PDW-HR1:
- Operation manual (214 pages) ,
- Operations & installation manual (60 pages) ,
- Installation manual (16 pages)
Table of Contents
Advertisement
Menu items in the 700s, relating to video control (VIDEO CONTROL)
Item number
Item name
713
VIDEO SETUP REFERENCE
Sub-item
INPUT LEVEL 59.94i/59.94P/
OUTPUT
LEVEL
715
VIDEO GAIN CONTROL
716
CHROMA GAIN CONTROL
717
CHROMA PHASE CONTROL
718
SETUP LEVEL (59.94i/59.94P/
29.97P mode)/BLACK LEVEL (50i/
50P/25P mode)
719
SYSTEM PHASE SYNC
720
SYSTEM PHASE SC
723
INPUT VIDEO BLANK
Sub-item
1
ALL LINE
2...10 LINE 12
...
LINE 20
2...15 LINE 9
...
LINE 22
726
H BLANKING WIDTH
728
OUTPUT SCH PHASE
Settings
Set the video setup amount to be added to the composite input and
output signal (in 59.94i/59.94P/29.97P mode only).
Remove the setup level selected by this item frrom the input signal.
29.97P mode (UC)
0.0%, 7.5%
59.94i/59.94P/
Remove the setup level selected by this item frrom the input signal.
29.97P mode (J)
0.0%, 7.5%
In 59.94i/59.94P/
Add the setup level selected by this item to the output signal.
29.97P mode (UC)
0.0%, 7.5%
In 59.94i/59.94P/
Add the setup level selected by this item to the output signal.
29.97P mode (J)
0.0%, 7.5%
Adjust the video output level.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 848 (848 (DEC))
Adjust the chroma output level.
–2048 (–2048 (DEC)) to 0 (0 (DEC)) to 848 (848 (DEC))
Adjust the chroma phase.
–128 (–128 (DEC)) to 0 (0 (DEC)) to 127 (127 (DEC))
Adjust the setup level (black level).
–272 (–272 (DEC)) to 0 (0 (DEC)) to 272 (272 (DEC))
Adjust the output signal sync phase.
–128 (–128 (DEC)) to 0 (0 (DEC)) to 127 (127 (DEC))
Adjust the output signal subcarrier phase.
0 (0 (DEC)) to 511 (511 (DEC))
Switch blanking on or off for lines in the vertical blanking interval of input
video signals. Lines can be specified individually. Y/C signals and odd/
even fields are blanked simultaneously.
Blanking in recorded signals is carried out according to these settings.
- - -: Specify the blanking for each line separately.
blnk: Regardless of the settings of other sub-items, blank all lines which
can be specified in this menu item.
thru: Regardless of the settings of other sub-items, switch blanking off for
all lines which can be specified in this menu item.
In 59.94i/59.94P/
Specify blanking for lines 12 to 20.
29.97P
blnk: Switch blanking on.
mode
thru: Switch blanking off.
In 50i/50P/25P
Specify blanking for lines 9, 322 to 22, and 335.
mode
blnk: Switch blanking on.
thru: Switch blanking off.
Select the horizontal blanking width of the output analog video signal.
narow (narrow): Digital blanking (narrow)
wide: Analog blanking (wide)
When "wide" is selected, the horizontal blanking width complies with
SMPTE-170M, and normally the blanking is widened and the image
becomes narrower. It is recommended to select "narow" at the editing
stage, then later, for broadcast transmission to select "wide", to output a
signal conforming to the standard. Note, however, that "narow" has to be
always selected for SDI signals.
Set the subcarrier H phase.
–512 (–512 (DEC)) to 0 (0 (DEC)) to 511 (511 (DEC))
149
Setup Menu
Advertisement
Table of Contents
