Page 1
Panasoni¢ Model No. N0mero de modelo TC-L37D2 TC-L42D2 I-i_m| VlEr LJ K English Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual...
Page 2
HDMI, the HDMI logo and High- Definition Multimedia Interface VIERA Link TMis a trademark trademarks or registered trademarks SDHC Logo is a trademark Panasonic Corporation. of HDMI Licensing LLC in the United SD-3C, LLC. States and other countries. Manufactured under license from Dolby...
Please read before using the unit ÷ Safety Precautions ......... Quick Start Guide • Accessories/Optional Accessory ....• Basic Connection ........... • dentifying Controls ........• FirstTime Setup ........... Enjoy your TV! Basic Features ÷ Watching TV ..........÷ Using VIERATOOLS ........
Safety Precautions The{ightning f lash witharrowhead CAUTION within a triangle is intended to tellthe userthatparts inside theproduct a rea riskof electric s hock to persons. triangleis intendedto tellthe userthatimportantoperating and The exclamati0n p 0intwithina WARNING: To reduce the risk of electric shock, do not remove cover or back.
Page 5
(All of the following accessories are manufactured by Panasonic Corporation) • Wall-hanging bracket: TY-WK3L2RW Always be sure to ask a qualified technician to carry out set-up. This equipment has been tested...
Page 6
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, For at least three (3) years from delivery of products, Panasonic will give to anyone who contacts us at the address provided below, for a charge of no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL.
[] VlERA Concierge and Quick Start Guide Adapters sold [] Product Registration Card (U.S.A) separately. 3> Please contact your nearest Panasonic dealer to purchase the recommended Optional Accessory wall-hanging bracket. For additional details, please refer to the wall-hanging Wall-hanging bracket bracket installation manual.
Page 8
® Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. ® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
® Not all cables and external equipment shown in this book are supplied with the TV. ® For more details on the external equipment's connections, please refer to the operating manuals for the equipment. ® For additional assistance, visit us at: www.panasonic.com www.panasonic.ca...
Page 10
Basic Connection (Continued) To use HDMI terminals ® Connecting to the HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. ® The HDMI connection is required for a 1080p signal. ® For "VlERA Link connections", please refer to p. 31. _B_To use COMPONENT terminals green...
Page 11
Identifying Controls Front of the TV channelsin sequence up/down navigations Remote control sensor within about 23 feet ges the input mode (7 meters) in front of the Chooses Menu and Submenu entries TV set button Power indicator (on: red, off: no light) C.A.T.S (Contrast Automatic Tracking System) ®...
First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when "Auto power on" (p. 29) is set to "No". Turn the TV On with the POWER button (TV) (Remote)
Page 13
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminal Not used: Go to Q (Labelinputs) Select "Not used" when no wire is connected to the "Antenna/Cable" terminal. ® Typical when a Cable/Satellite box is connected to a TV input. ®...
Page 14
First Time Setup (Continued) Select the Input labels (Label inputs) Select NEXT then press OK to go to the next step. Follow the instructions screen to complete following operations. Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/ VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/OTHER Adjust Clock (Set clock) Select...
Watching TV Basic connection (p. 9-10) Turn power on (Remote) (TV) INPUT POWER @ If the mode isnotTV, press _ POWER select TV. (p. 24) Select a channel number (Remote) • To directly enter the digital channel number _When tuning to a digital channel, press the button to enter the minor number in a compound channel number.
Page 16
Watching TV (Continued) Displays or removes the channel banner Clock INFO Channel Station Signal Picture Sleep timer identifier resolution mode remaining time Closed caption Rating level Aspect ratio • Press FORMAT to cycle through the aspect modes (p. 45) FORMAT 4 _1 •...
Using VIERA TOOLS VIERA TOOLS is the easy way to access frequently-used menu items. They are displayed as shortcut icons on the TV screen. Unlike a conventional menu, you can enjoy using, playing or setting a function quickly. Display VlERA TOOLS Select the item Set each item...
Viewing withVIERAIMAGE VIEWER The VIERA Image Viewer is a function that lets you easily view still images on a VIERA television by simply inserting an SD card into the VlERA SD card slot. (Media other than SD Cards will not work.) Insert the SD card * This setting will be skipped next time unless you select "Set later".
Insert your iPod into the connector terminal of the Universal Dock. (not included) ® Panasonic has no warranty for iPod data management. ® Do not twist your iPod when inserting it or taking it off from the Universal Dock, and be careful not to knock over this Universal Dock when your iPod is inserted.
Page 21
• Feature • You can enjoy music/videos/photos on your iPod on the TV screen. • You can enjoy music on your iPod while viewing photos with VIERA IMAGE VIEWER. • Available modes for your iPod TV control mode (Music/Video/Podcasts) Remote mode (Photo) You can operate your iPod through You can operate your iPod through the TV screen using the TV remote control.
Page 22
Playing an iPod on TV (Continued) 1"2_] e..lilrl_111[,]i] gl'_/ivl Preparations @ Set up Universal Dock for iPod (P. 20). ® Before connecting/disconnecting the iPod, turn the TV off or reduce the volume of the TV to its minimum. ® Use the menu on your iPod to select the appropriate video/photo output settings for your TV.
Page 23
Operate Select "Remote" Operate your iPod through the iPod screen using either the TV remote control or the iPod. MENU Go back to main menu Screen will be switched when "Remote" is selected. *ForiPod withtouch screen, please usethetouch screen tooperate i t. •...
Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen. You can select the external equipment to access. With the connected equipment turned Display the Input select menu INPUT Select the input mode Press the corresponding...
Page 25
If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable, you will find it easier to use. Please refer to p. 30-35. Before using these functions, you need to set "VIERA Link" setting to "On" as shown below. Display the menu Select "Setup"...
Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC. (p. 43) Display the Input select menu INPUT (example) Select...
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. the menu Display ÷ Shows the functions that can be adjusted. ®...
Page 28
How to Use Menu Functions • Menu list Menu Item' Adjustments/Configurations(alternatives) Reset to defaults* Resets all picture adjustments to factory default settings except for "Advanced picture". Picture mode Basic picture mode (VividlStandardlCinemalGamelCustom) (p. 47) Back light Adjusts the luminance of the back light. Adjusts color, brightness, etc.
(Continued) • Menu list Item Adjustments/Configurations (alternatives) Sets the mode to select the channel with the Channel up/down button. Channel surf mode (All/Favorite/Digital only/Analog only) Favorite: Only channels registered as FAVORITE. (p. 16) Language Selects the screen menu language. Clock Adjusts the clock.
Page 30
TV remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have the "HDAVI Control" function. This TV supports "HDAVl Control 5" function. Connections to the equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables allow you to interface with them automatically.
Page 31
@ When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this unit, the system switches to 2CH audio. (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) @ For details about HDMI cables for connecting a Panasonic HD camcorder, read the manual for the equipment.
Page 32
VIERA Link TM"HDAVI Control TM''* Display the menu Select "Setup" Select "VIERA Link settings" Select "VIERA Link" Select "On" (default is On) • Press to exit from a menu screen Select settings EXIT • Press to return to the previous screen RETURN -change...
Page 33
"TV" to "Theater". Sound will be output from the Home theater whenever the TV is powered on. If the "ONE TOUCH PLAY" key is pressed on the remote control for a Panasonic Home theater system, the following sequence of operations is performed automatically: _i_Home theater power switches On, and playback begins.
Page 34
VIERA Link TM"HDAVI Control TM'' You can enjoy more convenient operation with the "HDAVI Control" function in the "VIERA Link" menu• For more details on the "HDAVI Control" function, refer to p. 30 Display the VIERA Link menu VIEfA Select the item }select Select VIERA Link control...
Page 35
Adjustment for the equipment output. Control the theater speakers with the TV remote control. Volume up / down ÷ This function is available only when a Panasonic Amplifier or Player theater is connected. MUTE Mute ,,¢,, D Select "Speaker output"...
Lock You can lock specified channels or shows to prevent children from watching objectionable content. Display the menu Select "Lock" Youwilt beaskedto enteryourpassword eachtime you displaytheLock menu. Input your 4-digit password A4-digit code must be entered to view a blocked program or change rating settings.
Page 37
• To select the channel or the rating of the program to lock Select up to 7 (1-7) channels to block. These channels will be blocked regardless of the program rating. Select "Mode" and set to "Custom" _2_Select a channel to lock @ To lock/unlock all channels: Select "Mode"...
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. Display the menu Select "Setup" Select "ANT/Cable setup" Manual program Select the function • Press to exit from a menu screen EXIT To reset the settings of the Setup...
Page 39
Automatically searches and adds available channels to the memory. Select "ANT in" _ Select a scanning mode (p. 13) ®Select "Cable" or "Antenna" or select "Not used" (p. 13). _2_Select "Auto program" Settings are made automatically @ After the scanning is completed, select "Apply".
Closed Caption Display the menu Select "Closed caption" _2_next (_0select • Press to exit from a menu screen EXIT The television includes a built-in decoder that is capable of providing a text display of the audio. The program being viewed must be transmitting the Closed caption (CC) information. (p. 45) •...
Input Labels the menu Display Select "Setup" Select "Input labels" CD-_ CL C • Press to exit from a menu screen EXIT Devices connected to external input terminals can be labeled for easier identification during the input selection. (In selecting the input mode from p. 24 @) •...
Using Timer The TV can automatically turn On/Off at the designated date and time. ® The Clock must be set before On time/Off time settings. (p. 14) ® The "Sleep" timer and "On ! Off timer" will not work if the "Auto power on" (p. 29) is set. Display the menu Select "Timer"...
These diagrams show our recommendations on how to connect the TV unit to your various equipment. For other connections, consult the instructions for each piece of equipment and its specifications. For additional assistance, please visit our website at: www.panasonic.com www.panasonic.ca Back of the TV...
Ratings List for Lock "V-chip" technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. (p. 37) U.S. MOVIE RATINGS (MPAA) NO RATING (NOT RATED)AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply.
Page 45
Technical Information ® For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; characters might be cut off). ® The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On using the Component or HDMI connection to the TV.
Page 46
@ Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) 24 mm D_rd'stbt _@ The card is not inserted.
Page 47
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 30) @ This function may not work normally depending on the equipment condition. @ The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
Page 48
Technical Information (Continued) I-" I_--_,_ ®Aspect Ratio: ® The width will be decreased on both sides to Size 1 Size 2 reduce noise. ®Aspect Ratio: FULL/JUST(H-FILL/ZOOM) ® The width will be increased on both sides to reduce noise. See page 28 for more information * Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC...
Page 49
I'._ ITI,.'I"!I! iI_'dlTIG_I _ [_S'_ @ Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed...
Page 50
Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. details (p. 54, 55) For additional assistance, please contact us via the website at: www.
Page 51
Ifthis does n ot s olve t he problem, please contact your local Panasonic dealer, quoting the model number and serial number (both f ound o nthe rear ofthe TV). The LCD panel ismade u pofafew million pixels and is...
Page 52
Specifications Maximum 130 W 137 W 0.3W Standby condition 0.3 W Aspect Ratio i 16:9 Visible screen size 37" class (37.0 inches measured diagonally) 42" class (42.0 inches measured diagonally) 32.2 " x 18.1 " x 37.0 " 36.6 " x 20.6 " x 42.0 " H X Oia (819 mm x 460 mm x 940 mm) (930 mm x 523 mm x 1,067 mm)
Page 53
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Secaucus, New Jersey 07094 Panasonic LCD Televisions Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as "the warrantor")
Page 54
9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. • For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...
Page 55
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold "as is", and which product was delivered to you in new condition in the original packaging.
Page 58
Consumer Electronics Company, 5770 Ambler Drive Division of Panasonic Corporation of North America One Panasonic Way, Secaucus Mississauga, Ontario L4W 2T3 CANADA New Jersey 07094 U.S.A. tt 2010 Panasonic Corporation of North America. All Rights Reserved. Printed in U.S.A. tt 2010 Panasonic Corporation of North America.
Page 59
Panasoni¢ Model No. N0mero de modelo TC-L37D2 TC-L42D2 I-i_m| VlEr LJ K English Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual...
Page 60
HDMI, the HDMI logo and High- Definition Multimedia Interface VIERA Link TMis a trademark trademarks or registered trademarks SDHC Logo is a trademark Panasonic Corporation. of HDMI Licensing LLC in the United SD-3C, LLC. States and other countries. Manufactured under license from Dolby...
Please read before using the unit ÷ Safety Precautions ......... Quick Start Guide • Accessories/Optional Accessory ....• Basic Connection ........... • dentifying Controls ........• FirstTime Setup ........... Enjoy your TV! Basic Features ÷ Watching TV ..........÷ Using VIERATOOLS ........
Page 62
Safety Precautions The{ightning f lash witharrowhead CAUTION within a triangle is intended to tellthe userthatparts inside theproduct a rea riskof electric s hock to persons. triangleis intendedto tellthe userthatimportantoperating and The exclamati0n p 0intwithina WARNING: To reduce the risk of electric shock, do not remove cover or back.
Page 63
(All of the following accessories are manufactured by Panasonic Corporation) • Wall-hanging bracket: TY-WK3L2RW Always be sure to ask a qualified technician to carry out set-up. This equipment has been tested...
Page 64
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, For at least three (3) years from delivery of products, Panasonic will give to anyone who contacts us at the address provided below, for a charge of no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL.
Page 65
[] VlERA Concierge and Quick Start Guide Adapters sold [] Product Registration Card (U.S.A) separately. 3> Please contact your nearest Panasonic dealer to purchase the recommended Optional Accessory wall-hanging bracket. For additional details, please refer to the wall-hanging Wall-hanging bracket bracket installation manual.
Page 66
® Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. ® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
Page 67
® Not all cables and external equipment shown in this book are supplied with the TV. ® For more details on the external equipment's connections, please refer to the operating manuals for the equipment. ® For additional assistance, visit us at: www.panasonic.com www.panasonic.ca...
Page 68
Basic Connection (Continued) To use HDMI terminals ® Connecting to the HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. ® The HDMI connection is required for a 1080p signal. ® For "VlERA Link connections", please refer to p. 31. _B_To use COMPONENT terminals green...
Page 69
Identifying Controls Front of the TV channelsin sequence up/down navigations Remote control sensor within about 23 feet ges the input mode (7 meters) in front of the Chooses Menu and Submenu entries TV set button Power indicator (on: red, off: no light) C.A.T.S (Contrast Automatic Tracking System) ®...
Page 70
First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when "Auto power on" (p. 29) is set to "No". Turn the TV On with the POWER button (TV) (Remote)
Page 71
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminal Not used: Go to Q (Labelinputs) Select "Not used" when no wire is connected to the "Antenna/Cable" terminal. ® Typical when a Cable/Satellite box is connected to a TV input. ®...
Page 72
First Time Setup (Continued) Select the Input labels (Label inputs) Select NEXT then press OK to go to the next step. Follow the instructions screen to complete following operations. Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/ VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/OTHER Adjust Clock (Set clock) Select...
Watching TV Basic connection (p. 9-10) Turn power on (Remote) (TV) INPUT POWER @ If the mode isnotTV, press _ POWER select TV. (p. 24) Select a channel number (Remote) • To directly enter the digital channel number _When tuning to a digital channel, press the button to enter the minor number in a compound channel number.
Page 74
Watching TV (Continued) Displays or removes the channel banner Clock INFO Channel Station Signal Picture Sleep timer identifier resolution mode remaining time Closed caption Rating level Aspect ratio • Press FORMAT to cycle through the aspect modes (p. 45) FORMAT 4 _1 •...
Using VIERA TOOLS VIERA TOOLS is the easy way to access frequently-used menu items. They are displayed as shortcut icons on the TV screen. Unlike a conventional menu, you can enjoy using, playing or setting a function quickly. Display VlERA TOOLS Select the item Set each item...
Viewing withVIERAIMAGE VIEWER The VIERA Image Viewer is a function that lets you easily view still images on a VIERA television by simply inserting an SD card into the VlERA SD card slot. (Media other than SD Cards will not work.) Insert the SD card * This setting will be skipped next time unless you select "Set later".
Insert your iPod into the connector terminal of the Universal Dock. (not included) ® Panasonic has no warranty for iPod data management. ® Do not twist your iPod when inserting it or taking it off from the Universal Dock, and be careful not to knock over this Universal Dock when your iPod is inserted.
Page 79
• Feature • You can enjoy music/videos/photos on your iPod on the TV screen. • You can enjoy music on your iPod while viewing photos with VIERA IMAGE VIEWER. • Available modes for your iPod TV control mode (Music/Video/Podcasts) Remote mode (Photo) You can operate your iPod through You can operate your iPod through the TV screen using the TV remote control.
Page 80
Playing an iPod on TV (Continued) 1"2_] e..lilrl_111[,]i] gl'_/ivl Preparations @ Set up Universal Dock for iPod (P. 20). ® Before connecting/disconnecting the iPod, turn the TV off or reduce the volume of the TV to its minimum. ® Use the menu on your iPod to select the appropriate video/photo output settings for your TV.
Page 81
Operate Select "Remote" Operate your iPod through the iPod screen using either the TV remote control or the iPod. MENU Go back to main menu Screen will be switched when "Remote" is selected. *ForiPod withtouch screen, please usethetouch screen tooperate i t. •...
Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen. You can select the external equipment to access. With the connected equipment turned Display the Input select menu INPUT Select the input mode Press the corresponding...
Page 83
If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable, you will find it easier to use. Please refer to p. 30-35. Before using these functions, you need to set "VIERA Link" setting to "On" as shown below. Display the menu Select "Setup"...
Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC. (p. 43) Display the Input select menu INPUT (example) Select...
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. the menu Display ÷ Shows the functions that can be adjusted. ®...
Page 86
How to Use Menu Functions • Menu list Menu Item' Adjustments/Configurations(alternatives) Reset to defaults* Resets all picture adjustments to factory default settings except for "Advanced picture". Picture mode Basic picture mode (VividlStandardlCinemalGamelCustom) (p. 47) Back light Adjusts the luminance of the back light. Adjusts color, brightness, etc.
(Continued) • Menu list Item Adjustments/Configurations (alternatives) Sets the mode to select the channel with the Channel up/down button. Channel surf mode (All/Favorite/Digital only/Analog only) Favorite: Only channels registered as FAVORITE. (p. 16) Language Selects the screen menu language. Clock Adjusts the clock.
Page 88
TV remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have the "HDAVI Control" function. This TV supports "HDAVl Control 5" function. Connections to the equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables allow you to interface with them automatically.
Page 89
@ When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this unit, the system switches to 2CH audio. (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) @ For details about HDMI cables for connecting a Panasonic HD camcorder, read the manual for the equipment.
Page 90
VIERA Link TM"HDAVI Control TM''* Display the menu Select "Setup" Select "VIERA Link settings" Select "VIERA Link" Select "On" (default is On) • Press to exit from a menu screen Select settings EXIT • Press to return to the previous screen RETURN -change...
Page 91
"TV" to "Theater". Sound will be output from the Home theater whenever the TV is powered on. If the "ONE TOUCH PLAY" key is pressed on the remote control for a Panasonic Home theater system, the following sequence of operations is performed automatically: _i_Home theater power switches On, and playback begins.
Page 92
VIERA Link TM"HDAVI Control TM'' You can enjoy more convenient operation with the "HDAVI Control" function in the "VIERA Link" menu• For more details on the "HDAVI Control" function, refer to p. 30 Display the VIERA Link menu VIEfA Select the item }select Select VIERA Link control...
Page 93
Adjustment for the equipment output. Control the theater speakers with the TV remote control. Volume up / down ÷ This function is available only when a Panasonic Amplifier or Player theater is connected. MUTE Mute ,,¢,, D Select "Speaker output"...
Lock You can lock specified channels or shows to prevent children from watching objectionable content. Display the menu Select "Lock" Youwilt beaskedto enteryourpassword eachtime you displaytheLock menu. Input your 4-digit password A4-digit code must be entered to view a blocked program or change rating settings.
Page 95
• To select the channel or the rating of the program to lock Select up to 7 (1-7) channels to block. These channels will be blocked regardless of the program rating. Select "Mode" and set to "Custom" _2_Select a channel to lock @ To lock/unlock all channels: Select "Mode"...
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. Display the menu Select "Setup" Select "ANT/Cable setup" Manual program Select the function • Press to exit from a menu screen EXIT To reset the settings of the Setup...
Page 97
Automatically searches and adds available channels to the memory. Select "ANT in" _ Select a scanning mode (p. 13) ®Select "Cable" or "Antenna" or select "Not used" (p. 13). _2_Select "Auto program" Settings are made automatically @ After the scanning is completed, select "Apply".
Closed Caption Display the menu Select "Closed caption" _2_next (_0select • Press to exit from a menu screen EXIT The television includes a built-in decoder that is capable of providing a text display of the audio. The program being viewed must be transmitting the Closed caption (CC) information. (p. 45) •...
Input Labels the menu Display Select "Setup" Select "Input labels" CD-_ CL C • Press to exit from a menu screen EXIT Devices connected to external input terminals can be labeled for easier identification during the input selection. (In selecting the input mode from p. 24 @) •...
Using Timer The TV can automatically turn On/Off at the designated date and time. ® The Clock must be set before On time/Off time settings. (p. 14) ® The "Sleep" timer and "On ! Off timer" will not work if the "Auto power on" (p. 29) is set. Display the menu Select "Timer"...
Page 101
These diagrams show our recommendations on how to connect the TV unit to your various equipment. For other connections, consult the instructions for each piece of equipment and its specifications. For additional assistance, please visit our website at: www.panasonic.com www.panasonic.ca Back of the TV...
Page 102
Ratings List for Lock "V-chip" technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. (p. 37) U.S. MOVIE RATINGS (MPAA) NO RATING (NOT RATED)AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply.
Technical Information ® For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; characters might be cut off). ® The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On using the Component or HDMI connection to the TV.
Page 104
@ Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) 24 mm D_rd'stbt _@ The card is not inserted.
Page 105
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 30) @ This function may not work normally depending on the equipment condition. @ The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
Page 106
Technical Information (Continued) I-" I_--_,_ ®Aspect Ratio: ® The width will be decreased on both sides to Size 1 Size 2 reduce noise. ®Aspect Ratio: FULL/JUST(H-FILL/ZOOM) ® The width will be increased on both sides to reduce noise. See page 28 for more information * Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC...
I'._ ITI,.'I"!I! iI_'dlTIG_I _ [_S'_ @ Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed...
Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. details (p. 54, 55) For additional assistance, please contact us via the website at: www.
Page 109
Ifthis does n ot s olve t he problem, please contact your local Panasonic dealer, quoting the model number and serial number (both f ound o nthe rear ofthe TV). The LCD panel ismade u pofafew million pixels and is...
Specifications Maximum 130 W 137 W 0.3W Standby condition 0.3 W Aspect Ratio i 16:9 Visible screen size 37" class (37.0 inches measured diagonally) 42" class (42.0 inches measured diagonally) 32.2 " x 18.1 " x 37.0 " 36.6 " x 20.6 " x 42.0 " H X Oia (819 mm x 460 mm x 940 mm) (930 mm x 523 mm x 1,067 mm)
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Secaucus, New Jersey 07094 Panasonic LCD Televisions Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as "the warrantor")
9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. • For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...
Page 113
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold "as is", and which product was delivered to you in new condition in the original packaging.
Page 116
Consumer Electronics Company, 5770 Ambler Drive Division of Panasonic Corporation of North America One Panasonic Way, Secaucus Mississauga, Ontario L4W 2T3 CANADA New Jersey 07094 U.S.A. tt 2010 Panasonic Corporation of North America. All Rights Reserved. Printed in U.S.A. tt 2010 Panasonic Corporation of North America.