hit counter code
Craftsman 919.727360 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Air Compressor
  5. 919.727360
  6. Owner's manual
Craftsman 919.727360 Owner's Manual

Craftsman 919.727360 Owner's Manual

Permanently lubricated tank mounted air compressor
Hide thumbs Also See for 919.727360:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
SEARS
CRAFTSMAN
Model No.
919.727360
IMPORTANT:
Read the Safety Guidelines
and All Instructions
Carefully
Before Operating
OWNERS MANUAL
FOR
CRAFTSMAN
PERMANENTLY
LUBRICATED
TANK
MOUNTED
AIR COMPRESSOR
SAFETY
GUIDELINES
ASSEMBLY
OPERATION
MAINTENANCE
TROUBLESHOOTING
REPAIR
PARTS
Record
in the spaces
provided.
(1)
The Model
Number
can be found
on the
maintenance
label on top of the motor
shroud or on the bar code
label on the
rear of air tank.
(2)
The Date Code
Number
can be found
on the bar code label on the rear of the
air tank.
(3)
The Serial Number
can be found
on the
bar code label on the rear of the tank.
(4)
The Tank Registration
Number
is
located
on the metal
data plate which is
welded
onto the backside
of the air
tank.
(This data plate is painted
the
same color as the tank.)
Retain these numbers
for future reference.
Model
No
Serial No
Date Code
Tank Registration
No
MGP-727360
9/20/99
Sold
by Sears
Canada,
Inc.,
Toronto,
Ont.
M5B
2B8

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 919.727360

Summary of Contents for Craftsman 919.727360

  • Page 1 SEARS CRAFTSMAN OWNERS MANUAL CRAFTSMAN Model No. PERMANENTLY LUBRICATED 919.727360 TANK MOUNTED AIR COMPRESSOR Record in the spaces provided. The Model Number can be found on the maintenance label on top of the motor shroud or on the bar code label on the rear of air tank.

  • Page 2: Table Of Contents

    (90) from the date of purchase. This Craftsman Air Compressor warranty gives you specific legal rights and you may have other rights which vary from province to province.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY DAM- AGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. HAZARD RISK OF EXPLOSION OR FIRE HOWTOPREVENTIT WHAT CAN HAPPEN IT IS NORMAL FOR ELECTRICAL CONTACTS WITHIN THE ALWAYS OPERATE THE COMPRESSOR IN A WELL VENTILATED...
  • Page 4 RISK FROM FLYING OBJECTS WHAT CAN HAPPEN HOWTO PREVENT IT THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS, SIDE SHIELDS WHEN USING THE COMPRESSOR. LOOSE PARTICLES AND SMALL OBJECTS...
  • Page 5 RISK FROM MOVING PARTS WHAT CAN HAPPEN TO PREVENT THE ENGINE CAN START ACCIDENTALLY IF THE FLYWHEEL IS ALWAYS DISCONNECT THE SPARK PLUG AND BLEED PRESSURE TURNED BY HAND OR MOVED BY PULLING ON THE STARTER FROM THE TANK BEFORE PERFORMING MAINTENANCE.

  • Page 6: Glossary

    GENERAL INFORMATION You have purchased an air compressor unit consisting a one cylinder, single-stage air compressor pump and air and inflator kits. An air pressure regulator is required for tank. Included are wheels, regulator, gauges, and handle. most of the applications. An inline air filter which removes moisture and dirt from This air compressor requires no oil.

  • Page 7: Description Of Operation

    DESCRIPTION OF OPERATION Air Compressor Pump: To compress air, the piston moves Regulator: The air pressure coming FROM the air tank is up and clown in the cylinder. On the downstroke, air is controlled by the regulator. The regulator control knob is a drawn in through the air intake valves.

  • Page 8: Assembly

    ASSEMBLY Installing Wheels, Handles, Rubber 1. Attach the handle to the compressor saddle by Foot Strip inserting the handle inside the compressor saddle and lining up the two bolt holes on each side. Install the four screws, two on each side. Tighten securely. THE WHEELS AND HANDLE DO NOT Install one shoulder bolt and one nut for each wheel.

  • Page 9: Voltage And Circuit Protection

    Break-in Procedure Voltage and Circuit Protection Refer to page 5 (Specification Chart) for the voltage and circuit protection requirements of your compressor. only a fuse or circuit breaker that is the same rating as the Serious damage may result if the following branch circuit the air compressor is operated...

  • Page 10: Operating Procedures

    OPERATING PROCEDURES 1. Before attaching air hose or accessories, make sure 6. Always operate the air compressor in well-ventilated the "AUTO/O" lever is set to "O" and the air regulator areas; free of gasoline or other solvent vapors. Do not is closed.

  • Page 11: Air Filter - Inspection And Replacement

    MAINTENANCE UNIT CYCLES AUTOMATICALLYWHEN POWER IS ON. WHEN DOING MAINTENANCE, YOU MAY BE EXPOSED TO VOLTAGESOURCES, COMPRESSED AIR OR MOVING PARTS.PERSONALINJURIES CAN OCCUR. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, UNPLUG THE COMPRESSOR AND BLEED OFF ALL AIR PRESSURE. ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED MUST BE DONE BY A QUALIFIED SERVICE TECHNICIAN. Air Filter - Inspection and Replacement Safety Valve - Inspection...

  • Page 12: Guide

    TROUBLESHOOTING GUIDE PERFORMING REPAIRS MAY EXPOSE VOLTAGE SOURCES, MOVING PARTS OR COMPRESSED AIR SOURCES. PERSONAL INJURY MAY OCCUR. PRIOR TO ATTEMPTING ANY REPAIRS, UNPLUG THE COMPRESSOR AND BLEED OFF TANK AIR PRESSURE. PROBLEM CAUSE CORRECTION Excessive tank pressure - safety Pressure switch does not shut off Move the pressure switch lever to the "O"...
  • Page 13 TROUBLESHOOTING GUIDE (Continued) PROBLEM CAUSE CORRECTION Compressor is not supplying Compressor is not large enough for Check the accessory air requirement. If it is higher enough air to operate acces- air requirement. than the SCFM or pressure supplied by your air sories.
  • Page 14 AIR COMPRESSOR DIAGRAM...
  • Page 15 ACG-18 Cup, Saddle Mount 91895680 Screw, 1/4_20 x .75 (Torque 9-12 ft./Ibs.) ACG-19 Isolator TA-4318 Tank - 30 Gal. (U.S.) LA-3069 Label, Sears Craftsman LA-2633 Label, Drain Tank (French) LA-1978-1 Label, Drain Tank SSP-470-1 Hex Reducer Bushing SS-2707 Drain Valve...
  • Page 16 COMPRESSOR PUMP DIAGRAM...
  • Page 17 PARTS LIST PART NUMBER QUANTITY DESCRIPTION MO-9083 Motor AC-0140 Eccentric Bearing Assy. AC-0108 Fan Kit SSF-586 Screw 1/4 - 20 (Torque 100-120 in./Ibs.) SSF-615 Screw (Eccentric, Torque 100-120 in./Ibs.) + "58 AC-0263 Sleeve, Cylinder • 59 ACG-2 Connecting Rod + *60 DAC-308 Compression Ring "61...
  • Page 18 NOTES...
  • Page 19 NOTES...

  • Page 20: How To Order Repair Parts

    SE_A/R6 OWNERS MANUAL FOR CRAFTSMAN PERMANENTLY LUBRICATED TANK MOUNTED AIR COMPRESSOR MODEL The model number of your Sears Air Compressor can be found on the maintenance rabel on the top of the shroud or on the bar code label on the rear of the air tank.

Table of Contents