PERIOD, AND REQUESTING A RETURN MATERIAL AUTHORIZATION (RMA) NUMBER. IF A REGISTRATION CARD FOR THE PRODUCT IN QUESTION HAS NOT BEEN RETURNED TO D-LINK, THEN A PROOF OF PURCHASE (SUCH AS A COPY OF THE DATED PURCHASE INVOICE) MUST BE PROVIDED. IF PURCHASER'S CIRCUMSTANCES REQUIRE SPECIAL HANDLING OF WARRANTY CORRECTION, THEN AT THE TIME OF REQUESTING RMA NUMBER, PURCHASER MAY ALSO PROPOSE SPECIAL PROCEDURE AS MAY BE SUITABLE TO THE CASE.
CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD. LIMITATION OF LIABILITY IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE OR INTERRUPTION OF A D- LINK PRODUCT, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY.
TABLE OF CONTENTS ABOUT THIS GUIDE............................II ................................URPOSE ............................EFORE YOU EGIN INTRODUCTION..............................1 ................................1 EATURES System Requirements ............................. 1 Operating Systems:............................2 ............................2 ATHER NFORMATION Determine Your Operating System ........................ 2 Internet Service Protocol..........................3 Connection Address and Configuration ......................3 Configuration Form............................
About This Guide ® Congratulations on your purchase of the ADSL PCI Modem Card for Windows 95, 98, 2000 Me and NT 4.0. This internal modem card connects to a telephone line using a standard RJ-11 connector and follows all the latest PC industry guidelines, including Plug and Play. Purpose The purpose of this manual is to discuss the installation and use of your ADSL PCI Modem Card.
• Data – indicates data is currently being transferred via the ADSL connection System Requirements D-Link recommends that your PC system meet the following minimum requirements to be able to use the ADSL PCI Modem Card: • An IBM PC or compatible computer with a Pentium 100Mhz or faster processor •...
Operating Systems: Windows 95, 95 OSR2 • Windows 98, 98 second edition • Windows 2000 • Windows Me • Windows NT 4.0 • The installation procedure varies according to the operating system you are using. It is critical that you use the correct installation procedure for your operating system. Gather Information To make connecting and configuring your modem as easy and straightforward as possible, gather the information listed on the form that follows.
Internet Service Protocol Your Internet Service Provider (ISP) uses one of the protocols listed below. Look over the information provided by your ISP or call their technical support if you are not sure which protocol they are using. • RFC 2364 Point-to-Point Protocol over ATM •...
Configuration Form Before beginning the installation, photocopy or print this page and fill out the form provided. Refer to this form when you reach the Service Options panel and enter the proper configurations. ADSL COMMUNICATION SETTINGS: Protocol: RFC 1483 Multi-protocol Encapsulation over ATM RFC 2364 Point-to-Point Protocol over ATM RFC 1577 Classical Internet Protocol over ATM VPI value:...
Step 1 Hardware Installation The card must be installed on the computer’s mainboard. Since this is an electrical device, safety is important. First, properly shutdown the computer and unplug the computer’s power cord. Touch an unpainted screw on the back of the power supply with the tip of your screwdriver to discharge any static electricity and prevent possible damage to the card and computer components.
Step 2 Software Installation and Configuration Windows automatically detects new hardware when it is added to the computer. The Add New Hardware Wizard appears to guide you through the Software Installation. In order for the Modem to work you must configure it properly. The following sections show you the steps.
Modem Indicators Diagnostic Icon Function LED Indicators Uninstall the Modem To uninstall this PCI ADSL Modem, follow these steps 1. Click on “Start”, 2. Go to “Program”, 3. Select “D-Link DSL-100D” 4. Click “Un-Installer” and follow the instructions when prompted...
Operating temperature: 0° to 55° C. Operating humidity: 5% to 95% (non-condensing). EMI: CE class B, FCC class B Safety: UL, CSA Technical Support Contact D-Link Technical Support at the phone numbers or Internet addresses listed below: Technical Support: (949) 788-0805. Web: www.dlink.com...
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chainstore/Wholesale Government Transportation/Utilities/Communication System house/company Other____________________________________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? ______________________________________________________________________...