Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Page 3
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents Section 1: Getting Started ..........4 Section 5: Entering Text ..........33 Understanding this User Manual ......4 Built-in QWERTY Keypad .
Section 1: Getting Started Text Conventions This section explains how to start using your SCH-r450 phone by activating your service, setting up your Voicemail, or getting an This manual provides condensed information about how to use understanding of how this manual is put together. your phone.
Only use Samsung-approved charging devices and batteries. battery until it clicks into Samsung accessories are designed to maximize battery life. Use place. of other accessories may invalidate your warranty and may Remove the Battery cause damage.
Use the Travel Adapter Low Battery Indicator The travel adapter included The battery indicator ( ) in the upper-right corner of the with your phone is a display indicates power level. Monitor the battery strength and convenient, light-weight ensure your battery is adequately charged. charger that rapidly charges Three bars ( ) indicate a full charge.
Once the phone finds a signal, the time, date, and day Follow the prompts in the new user tutorial to setup your appear near the top of the display. mail box. Listen to Voicemail You’re now ready to place and receive calls. In standby mode, press and hold the key or dial your Note: If you are outside of your carrier’s coverage or roaming area, the No...
Page 11
Insert the memory card — label side facing up and smaller Press the memory card up into the slot until the card lock end pointing toward the phone — into the memory card releases. slot. Remove the memory card from the memory card slot. If desired, install another memory card.
Section 2: Understanding Your Phone Closed View of Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use. Features of Your Phone Domestic and international voice and text messaging service (available •...
Page 13
Left Soft Key — Used to navigate through menus and Voicemail Key — Lets you speed dial your Voicemail applications and to select the choice indicated at the account to review your voice messages. bottom left corner of the Main LCD. Special Function Keys —...
Features Camera – Music Player Key — Launches the Camera or the Music Player feature of your phone. Earpiece / Speaker — Lets you hear ringing and alert tones, alarm tones, and the other parties to calls. Voice Recognition Key — In standby mode, pressing and holding this key launches VoiceSignal options.
Closed Rear View of Your Phone soft2 Key — Right soft key — Used to navigate through menus and applications and to select the choice indicated at the bottom right corner of the Main Display. OK Key — When navigating through a menu accepts the highlighted choice in a menu.
Camera Lens — The lens of your built-in camera. When the Left soft key function is Edit, press the Edit (left) soft key • ) to edit a Contact. Mirror — Lets you position the Camera Lens to take self Right Soft Key portraits.
Camera – Music Player Key If you enter an incorrect character, briefly press • backspace (and delete) the character. Use the Camera-Music Player key ( ) on the right side of To erase the entire sentence, press and hold • the phone in standby mode to: To back up one menu level, briefly press •...
Page 18
The bottom line of the display shows current soft key the icons that can appear on the top line of the display. functions. The sample screen shows that pressing the Left Dialogue Boxes soft key ( ) will display the Settings menu and Dialogue boxes prompt for action, inform you of status, or warn pressing the Right soft key ( ) will show the...
Backlights Note: With the QWERTY keypad open, T9 Word is not available. Also, use 123 mode instead of Symbol to enter symbols and punctuation in your Backlights illuminate the display and the keypad. When you press text. any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu.
Place Calls in Standby Mode holding the Speakerphone key ( ) until “Speakerphone On” appears in the display. While in standby mode, enter a phone number, and press to place a call. Caution!: Keep the phone away from you ear while in Speakerphone Mode. (For more information, refer to “Responsible Listening”...
Vibrate Mode Camera Mode In standby mode, repeatedly press the volume key Camera mode lets you activate your phone’s camera to take pictures. In Camera mode, you can also adjust the resolution and ) down until Vibrate appears in the display. appearance of your pictures.
Section 3: Call Functions This section provides procedures for making and answering Note: You can define up to 3 emergency numbers in your phone. (For more calls. This section also describes features, such as call logs and information, refer to “Emergency #” on page 108.) call timers, that help you make calls and manage your call time.
Manual Pause Calling 1-Touch Dialing To manually call a number with pause(s) without storing it in your Use 1-touch dialing to speed dial Contacts from 1 (Voicemail) Contacts list: through 9. In standby mode, enter the number you wish to call. In standby mode, press and hold the number key corresponding to the desired Contact’s speed dial number.
Page 24
3-Touch Dialing Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use Voice Dialing to make a call, you must end Use 3-touch dialing to speed dial Contacts from 100 through 999. that call before you can use other Voice Commands. For more In standby mode, press and release the number key information, refer to “Voice SVC”...
Page 25
Speak clearly and say the name of a person in your • “Mobile 2” Voice Dial dials the specified number. Contacts list, first name followed by last name. Dialing a Number If the name is recognized, Voice Dial repeats the name and dials the number.
Say “Yes” to confirm the number or “No” to hear the next Tip: Assign pictures to Contacts entries. The entry’s assigned picture one, or use the keypad to select the correct number from appears in the display when you receive a call from that entry. For more information, refer to “Assigning a Picture to a Contacts Entry”...
➔ Press the Volume key up or down to set the call ringer In standby mode, press Menu, then select Settings ➔ volume as desired. Call Settings Call Answer. Adjust the Ringer Tip: You can also carry out this procedure using the QWERTY keypad. In standby mode, press the Volume key ( ) on the The following options appear in the display:...
Page 28
Caller ID While in a call, press the Mute/Unmute soft key to disable/ enable the microphone. Caller ID lets you identify who is calling you by displaying a caller’s number. If the caller’s name and number are stored in While in a call, press the Options soft key. The following Contacts, the caller’s name also appears.
Calls • Details — Contacts calls only — Lets you view the Contacts entry for the recipient of this call. Your phone has Call Logs that retain information about Outgoing, • Erase — Erase the selected call from your Outgoing call list. Incoming, and Missed Calls.
Press the Options soft key to display a pop-up menu Use the Up and Down navigation keys to highlight a call, containing the following options: then press to view further information about the call. • Save — Save the number to your Contacts. Press the Options soft key to display a pop-up menu that •...
➔ Press the Options soft key to display a pop-up menu that In standby mode, press Menu, then select Calls Call contains the following options: Timer. The following options appear in the display: • Save — Save the number to your Contacts. •...
To reset all timers except Lifetime Data Counter, press the Note: Although Total call timers can be erased, LifeTime call timers can Reset All soft key. never be erased. Press to exit the Data Counter screen. Data Counter Use Data Counter to view the amount of data that has been sent Note: Although other data counters can be reset, only the Lifetime Data Counter can never be reset.
Page 33
Select Create New to add the number as a Contacts entry, or select Update Existing to find a Contact with which to associate the new number. Follow the prompts to store the number to Contacts. Call Functions...
Section 4: Menu Navigation This section explains the menu navigation for your phone. It also Press the Back soft key or the key to return to the includes an outline of all the available menus associated with previous menu. your phone. Return to the Previous Menu Press the Back soft key to return to a previous menu.
Navigation Key Shortcuts QWERTY Keypad Shortcuts QWERTY Keypad Closed In standby mode and with the QWERTY keypad open, you have the option of using the arrow keys on the keypad itself to launch In standby mode and with the QWERTY keypad closed, press a applications, as shown here.
Section 5: Entering Text This section outlines how to select the desired text entry mode rotates the image in the display to show information in a wider, when entering characters using the phone keypad or the nested, landscape format. Using the QWERTY keypad, you can type QWERTY keyboard-style keypad.
• then press message by pressing the number above the symbol in the SYMBOLS • For practice, enter the word “Samsung” by pressing each of the pop-up window. following keys only once: The current text entry mode (T9 Word, Abc, ABC, 123, or Symbols) is indicated in the lower part of a text entry screen.
• Using the QWERTY keypad, press the key labeled with the Note: To enter a space, press the key. To enter a period, press the corresponding number that you wish to insert into your message. key. These key functions apply to both T9 Word and Abc •...
Section 6: Understanding Your Contacts This section details how you can manage your daily contacts by The following options appear in the display: storing their names and numbers in your Contacts list. You can • Find — Find a phone number By Name. have your Contacts entries sorted by name.
Finding a Contacts Entry Say “Yes” to confirm the name or “No” to hear the next Voice Method name, or use the keypad to select the correct name from the list. (For more information, refer to “Choice Lists” on Use the VoiceSignal Lookup command to view contact page 96.) information for any named contact stored in your Contacts list by saying the name.
The Find screen appears in the display with the Go To field – Send Pic Msg — Create and send a picture message to the selected Contact. highlighted, followed by the first few names in your – Call — Dial the number associated with the name. Contacts list.
Select Create New. The Select Type screen appears in the • Mobile • Home display showing the following icons: • Work • Pager Mobile Home • E-Mail • Group Work Pager • Ringtone • Fax Enter a phone number in the highlighted field. Select the number type that matches your new entry.
Page 43
Highlight the particular information you want to add or with the phone number and with special characters called pauses, up to a maximum of 32 digits. change. Wait — Stops the calling sequence until the phone receives further • • Press to backspace and delete numbers or letters.
Page 44
When you’re finished entering information, press Use the keypad to edit the e-mail address. (For more store the number to Contacts. information, refer to “Entering Text” on page 33.) Pause Dial from Contacts Press to save your changes. Assigning a Picture to a Contacts Entry If you stored the number using 2-second pause(s), simply recall the number from Contacts, and press to dial...
The camera viewfinder screen appears in the display. Highlight the Ringtone field, then press the Set soft key. The Contact Tone menu showing the following options Press TAKE ( ). “Picture saved” pops-up in the display appears in the display: and you are returned to the Camera viewfinder screen.
Page 46
in the display. Press . The new entry is saved to your Contacts list. Add to an Existing Entry Press the Save soft key. The following options appear in the display: Select Update Existing. The Update Existing screen • Create New — Lets you create a new Contacts entry. appears in the display showing your Contacts list with the •...
Press again to save your changes to the existing entry. Press the Options soft key. The following options appear in Speed Dial the display: • Set Speed Dial — Assign a speed dial number. A Contacts entry’s Speed Dial number corresponds to the number •...
Press the Yes soft key to remove the Speed Dial Note: Press the No soft key to discard the assignment and return to the assignment. “Speed Dial Removed” pops up in the Speed Dial screen. display, and you are returned to the Edit Contact screen. Press to save your changes.
Page 49
• No Group • Friends • Business Highlight a Group, then press the Options soft key. The • Colleague following options popup in the display: • Family • Send Txt Msg • Friends • Send Pic Msg Select the Group to which you want to assign the new •...
Page 50
Rename a Group Add a New Group The Rename option lets you change the name any of the Groups, The New option lets you add Groups. except No Group. In standby mode, press Menu ( ), then select Contacts In standby mode, press Menu ( ), then select Contacts ➔...
Erase a Group Highlight the desired entry, then press the Options soft key. The following options appear in the display: The Erase option lets you delete a Group, thus freeing you to reassign the Contacts formerly in the Group. • New Contact •...
Section 7: Messaging This section explains how to send or receive different types of Tip: To launch the Create Txt Msg screen using a voice command — In messages. This section also describes the features and standby mode, press and hold until the phone prompts, “Say a functionality associated with messaging.
– Cancel Msg — Prompts you to save this message as a Draft, then View Later — Saves the message to your inbox, where you can view • closes the Create Txt Msg screen. it later, and returns your phone to call mode. Once you’re finished entering your message, press Select the desired option.
Page 54
Press the My Images soft key. A thumbnail view of your If you wish to insert a sound into your Picture message, new photo appears in the display with up to three use the Down navigation key to highlight the Sound: field thumbnails of other images.
• Delivery Ack — Choose On or Off — Requests confirmation Tip: To launch the Create Pic Msg screen using a voice command — In when your message is received. standby mode, press and hold until the phone prompts, “Say a •...
Page 56
Use the navigation keys to highlight a picture to be added • Select and insert a sound into your message. • Press to exit the pop-up menu without inserting a sound. to your message, then do the following: Press the Options soft key to complete the message text •...
Receive Picture Messages • Play Again — Play the sound file included in the picture message again. When you receive a Picture Message in standby mode, the ringer • Forward — Send a copy of this message to another recipient. sounds (unless turned off) and New Message appears in the •...
If the new picture message is not highlighted, use the Up ➔ Tip: While in a call, press the Options soft key, then select Messages and Down navigation keys to highlight the new message. Inbox. Press View . “Connecting” appears in the display Select the message that you wish to view.
Page 59
Managing Inbox Messages Outbox In standby mode, press the Messages shortcut (Up Your phone stores messages in the Outbox, regardless of whether the message was successfully transmitted. Verify if and navigation) key, then select Inbox. The Inbox appears in when a message or e-mail was successfully received by the display.
• Add To Contacts — Save the recipient’s number to your • Resend — Re-send the highlighted message to the original Contacts. recipient. • Message Info — Shows message delivery status, addressee, • Lock / Unlock — Block/permit erasure of the highlighted size, and so on.
Page 61
Enter the phone Number or E-Mail address of a recipient, • Save As Draft — Save the message to your Drafts box. • Save As Preset — Save text of this message as Preset Msg. then press • Add To Contacts — Save the recipient’s number or e-mail Compose your message using the keypad, then press the address to your Contacts.
Page 62
• Add Preset Msg — Insert pre-composed text into your message Press the Options soft key. The following options appear in text. the display: • Save As Draft — Saves the changed message to the Draft Box. • Send — Send the highlighted message to the original recipient, if •...
Erase Messages Listen Later — Returns you to standby mode where you can later • choose to call your mailbox and review your messages. You can erase all of the messages in each your boxes from one Select the desired option. convenient location.
Message Settings • Auto Scroll — On/Off — With Auto Scroll On, the full content of a text message automatically rolls upward on the display, one screen- Use the Msg Settings sub-menu to define settings for your text full at a time. and picture messages.
Section 8: Browser This section outlines how to launch Browser, how to navigate to In standby mode, do one of the following to launch other pages on the web, and how the keys on the keypad are Browser: used with the web application. Additionally, links to other sites •...
Browser presents on-screen items in any of the following ways: BACK Key — A browse, back-up key. Press once to Text or numeric input. • back up one page. Press and hold to go back to home Links (embedded in content). •...
Section 9: Games & Apps This section explains the Games & Apps features where users The Games & Apps screen appears in the display with the can download multimedia, applications, games, and check news Games & Apps icon ( ) highlighted. You have the and sports.
Section 10: Camera Use your The r450 phone to take full color digital pictures, Your phone is now in camera mode. display them on your phone’s vivid color display, and instantly Taking Pictures share them with family and friends. It’s fun, and as easy to use as Taking pictures with the built-in camera is as simple as choosing a traditional point-and-click camera.
Page 69
To view the new picture, press the My Images soft key. A In camera mode, press the Options thumbnail image of your new photo appears in the display soft key. The options menu bar along with any other thumbnail images, if available. appears in the display with the Self Timer icon ( ) highlighted.
Camera Screen Layout The soft keys change giving you the following options: • To save all of the photos, press the Done soft key. When you activate your phone’s camera, • To save some of the photos and discard the rest, use the Navigation the second line of the display is reserved key to highlight each photo you want to discard and press for the current camera resolution setting...
Quality — Indicates camera’s picture quality setting. (You Memory — Indicates where new photos will be stored: can change the picture quality setting. For more in the phone (as shown) or on an optional Memory Card information, refer to “Quality” on page 70.) ).
Camera Options In camera mode, press the Options soft key and select Self Timer. Highlight one of the following Self Timer The Camera Options let you adjust the default camera settings to suite available lighting, the subject of the photo, or the purpose of options: the photo.
Multi Shot Highlight the desired Quality setting, then press You’re returned to the camera viewfinder screen. Multi Shot lets you take three pictures in succession at the touch of a key. Resolution In camera mode, press the Options soft key, then select Change the size (in bytes) of your pictures using the Resolution Multi Shot and one of the following Multi Shot options: setting.
Select one of the following White Balance values: In camera mode, press the Options soft key, then select Color Effects. • Auto — The camera automatically adjusts picture quality to available light. Press . The following options appear in the display: •...
Page 75
Reset Settings Use the Left and Right navigation keys to highlight Settings. In camera mode, press the Options soft key, then select ➔ Settings Reset Settings. You are prompted to confirm Select Memory. The following Memory options appear in reset of all camera settings. the display: •...
The following options appear in the display: The next time you TAKE ( ), the camera takes a lighter or darker picture according to your selected Brightness • Off — Default Value — You are prompted to save a new photo. •...
Point, Click, and Send Pictures • Send — Send the currently displayed or highlighted photo as a Picture Message or Via Bluetooth to another device. (For more Take a picture and send it to anyone with a compatible device in information, refer to “Bluetooth”...
Page 78
Press to save the address(es) and move to the Subject field. Use the Navigation keys to move to the other message fields. (For more information, refer to “Send Picture Messages in Camera Mode” on page 50.) When you are finished composing your message, press SEND ( ) to send the Picture message to the intended recipients.
Section 11: Multimedia My Images This section outlines your phone’s multimedia functions and key features associated with multimedia. My Images lets you choose the pictures that appear in your Accessing Multimedia phone’s display while in standby mode (wallpaper) and as picture IDs for your contacts.
Launching the Music Library Menu • Send — Lets you send the selected image to a specified recipient in a Picture Message or to another device Via Bluetooth. In standby mode, press , then select • Set As — Lets you assign the selected picture as the Main ➔...
– Remove — Deletes highlighted or marked music file(s) from the Highlight the desired option, Memory Card. press VIEW ( ), and then do – Properties — Lists the title, artist, album, genres, copyright one of the following: information, time length, file size, and bit rate of the highlighted music file.
Music Player Controls – Properties — Lists the title, artist, album, genre, copyright information, time length, file size, and bit rate of the highlighted music Volume key: • file. – To play a music file louder, – Visualizer — Lets you change the Music Player visualization to Simple press the Volume key Up.
Note: Card readers vary. Follow the installation instructions included with Tip: You can also access My Ringtones from: your card reader and personal computer. -A Set Alarm screen by selecting the Ringer option, highlighting the second (file name) field, pressing the Left or Right navigation key, and Open the Memory Card reader drive and the “My_Music”...
• Ringtone Info — Displays information about the selected file, Press the Options soft key. such as the file name, the file type, and the data size. • For a recorded sound file, a pop-up menu containing the following • Get More Ringtones — Launches the Browser so that you can options appears in the display: download ringtones.
– Set As — Lets you assign the selected sound file as the Ringtone or Press . The Record New screen appears in the display. as the Contact ID for a Contact or an Alert Tone for Text, Picture, or Press REC ( ), then start speaking.
Page 86
Erase One Voice Memo Select Erase all. “Erase All Sounds?” appears in the display. From the Multimedia menu, select My Sounds. A list of To erase all unlocked the sound files, press the Yes soft sound files appears in the display. key.
Section 12: Tools This section explains how to use your phone’s digital assistant • Stop Watch — Lets you view the amount of time. • Converter — Lets you convert currencies (according to the latest functionality to schedule events, set reminders, create a “to do” rates) and weights, measures, and temperatures from one system list, perform calculations, and more.
Page 88
Turn Bluetooth On/Off Place the Bluetooth device in discoverable mode. (See the device user manual for more information.) When the Bluetooth is turned on, you can use the Bluetooth features available. When the Bluetooth is turned off, you cannot Press .
Calendar Connecting to a Bluetooth Device From the Device list, Calendar lets you view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current Highlight the device and press date is highlighted and days with scheduled events are If you are unable to pair with the device a popup appears in surrounded by a box.
Memo Pad Select the desired option to perform the related process. Add a New Event You can create a notes and store them in Memo Pad. You can’t prioritize or set an alert for stored notes. Return to Memo Pad From the Tools menu, select Calendar.
• Edit the memo using the keypad. (For more information, refer to • Time — Use the numeric keys to enter the time, and use the Left “Entering Text” on page 33.) and Right navigation keys to select AM or PM. •...
• If the alarm was set as a Weekends only alarm, the alarm icon • Alarm 2 remains in the top of the display. • Alarm 3 • If the alarm was set as a Once only alarm, the alarm icon Select an active Alarm selection.
From the Tools menu, select World Midway HAST/HADT: AKST/AKDT: PST/PDT: Time. A world map appears in the Honolulu Alaska Seattle display. San Francisco Los Angeles Use the Left/Right navigation keys to display the time zone and city that MST/MDT: CST/CDT: you wish to view.
From the Tools menu, select Calculator. The Calculator To perform another calculation, press the Clear soft key. Stop Watch appears in the display. Enter the first number in your equation using the keypad You can use this menu to set a stop watch. (numbers can be up to nine digits long).
Page 95
From the Tools menu, select Converter and the Press EDIT ( ). The EDIT EXCHANGE RATE screen appears conversion feature you wish to use. in the display. Use the Navigation key to select the units to be converted Use the keypad to change the exchange rate. (For more From and To.
Enter an identifier of up to 5 characters for the new Use the Up/Down navigation keys to highlight the currency currency using the keypad. (For more information, refer to exchange rate to be erased. “Entering Text” on page 33.) Press the Erase soft key. You are prompted to confirm the Press the Down navigation key to highlight the Exchange erasure.
Page 97
If needed, press the Down navigation key to highlight the Tip field. Use the keypad to enter a tip percentage. (For more information, refer to “Entering Numbers” on page 35.) If needed, press the Down navigation key to highlight the # Paying field.
Section 13: Voice SVC This section explains how to use your phone’s digital assistant “Say a Command” appears in the display and is pronounced through functionality to schedule events, set reminders, create a “to do” the earpiece, followed by a list of available commands. list, perform calculations, and more.
Voice Settings Go to — Lets you access the Voice Memo, Calendar, and Contacts List • features of your phone. (See “Voice Memo” on page 82, “Calendar” Choice Lists on page 86, and “Contacts” on page 36 for more information.) VoiceSignal uses choice lists when it is not confident it has Check —...
Tips for Adapting Digit Dialing Use the navigation keys to highlight the Choice List Use Adapt Digits in a quiet place. behavior you prefer, then press the key to accept the • Make sure you wait for the beep before starting to speak. •...
Page 101
Wait for the beep and say the digits using your normal tone Select Reset Digits. The phone prompts you to confirm of voice. After a moment, the phone plays back the digit adaptation rest. recording and prompts “Did the recording sound ok?” To reset your digit adaptation, press the OK soft key.
Voice Launch To set the key or action that launches VoiceSignal, do the following: ➔ From the Voice SVC menu, select Voice Settings Voice Launch. The following options appear in the display: • Key Only — Press and hold to activate VoiceSignal for one call.
Section 14: Changing Your Settings This section explains how to customize your phone to suit your • 911 Only — GPS location setting is on only when you dial 911. needs and preferences. Select the desired Location setting. You’re returned to the Accessing Your Settings Settings menu.
Select the desired display option. The following sections Select the desired option. Up to four pictures, images, or describe the above listed display sub-menus in greater animations appear in the display. detail. Highlight a picture, image, or animation; then press Menu Style set the highlighted picture, image, animation to display when the phone is in standby mode.
➔ The following options appear in the display: At the Settings menu, select Display Settings Banner. The Banner text entry screen appears in the display. Note: If necessary, press and hold the key to erase an existing banner. Enter a word or short phrase (up to 12 characters) to appear in your phone’s display while in standby mode.
and Always On (this setting uses much more power than the Use the Volume key (on the left side of the phone) or the timed settings) and Always Off. Navigation key to select a volume level (or vibrate mode) • Brightness — Use the Navigation key to select between any of 5 for the selected Volume option.
The following options appear in the display: Press to save your selection. Key Tone • My Ringtones • My Sounds Key Tone lets you adjust the volume level and length of tone that Select the desired option and highlight a Ringer, then press the keypad generates each time you press a key.
Call Answer Auto Retry You can select a specific answer mode when you receive an Auto Retry automatically re-dials a number if the connection incoming call. (For more information, refer to “Call Answer” on fails. Depending upon your location, the number of times your page 25.) phone automatically dials the number may vary.
➔ At the Settings menu, select Call Settings Voice Note: The “Enabling TTY may impair headset use and non-TTY Privacy. The following options appear in the display: accessory performance.” message pops up when you select TTY Mode. • Standard — Voice privacy is disabled. •...
Page 110
Lock Phone To apply your selection, display/remove the Airplane Mode icon ( ), and return to standby mode, press the Yes Locking the phone limits all outgoing calls except calls to 911 emergency and the three user-programmable emergency soft key. numbers.
Page 111
Change Lock when your phone is locked or restricted. This can be a useful feature for controlling outgoing calls from your phone. The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default Note: Emergency number 911 is hard-coded into your phone.
Page 112
Select one of the three emergency number entries. To keep your current Settings and return to the Security sub-menu, press the No soft key. Enter an emergency number (up to 32 digits in length). Erase All Entries Press to save the number you entered. Erase All Entries erases your Contacts list entries and My Images Call Emergency Numbers in Lock Mode photos.
You’re prompted to enter the lock code. • Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of networks is used to acquire service. If no preferred networks are found, any digital system is acquired. Note: The default lock code is the last four digits of your telephone number. Select the desired roaming option.
– Enter the current time using your keypad. The hour and minute must be entered using two digits each and in 12/ 24-hour format. – Use the Up/Down navigation keys to highlight the time-of-day setting (am/pm) field. – Use the Left/Right navigation keys to select am, pm, or 24 Hours. [You Press the Down navigation key.
➔ Press the Up navigation key. The Find screen appears in From the Settings menu, select Phone Settings the display showing a list of Contact names that match Auto Key Lock. The following settings appear in the your entry. display: •...
Phone Memory The following options appear in the display: • Save Options — Lets you specify whether your images and Lets you review your phone’s available memory and manage your videos will be stored in your phone or on an optional Memory Card. files stored there.
➔ At the Settings menu, select Memory Info Phone • Press the Yes soft key to erase all marked files or press the No soft key to return to the Erase screen. Memory. The Phone Memory screen appears in the To move/copy image files to the Memory Card, do the display listing the following options: following:...
Page 118
Memory Usage • My Music • My Ringtones Memory Usage lets you review your usage of your Memory • My Sounds Card. • Format Card ➔ At the Settings menu, select Memory Info Card Select the desired folder. A list of all files in the folder ➔...
Formatting a Memory Card • Highlight a Music/Ringtone/Sound file you want to erase, then press to mark the file for erasure. (Press the Mark All soft key to Formatting a microSD Memory Card erases any data currently on mark all Music files for erasure.) the card and creates multimedia directories compatible with your •...
Page 120
ESN / MEID Press to return to the Phone Info menu. Icon Glossary You can view the ESN (Electronic Serial Number)/MEID (Mobile Equipment Identifier) values for your phone in both Decimal and This option causes the ICON GLOSSARY list to appear in the Hex values from this menu.
Page 121
➔ At the Settings menu, select Phone Info Refurbish. The following information appears in the display: • Date and Time your phone was last refurbished. • Refurbish counter — Shows number of times your phone has been refurbished. Changing Your Settings...
Section 15: Health and Safety Information This section outlines the safety precautions associated with using absorption of RF energy by the human body expressed in units of your phone. These safety precautions should be followed to safely watts per kilogram (W/kg). The FCC requires wireless phones to use your phone.
1.5 cm from the body. Samsung cares for the environment and encourages its Use of other accessories may not ensure compliance with FCC RF customers to recycle Samsung mobile phones and genuine exposure guidelines.
Consumer Information on Wireless Phones Do wireless phones pose a health hazard? The U.S. Food and Drug Administration (FDA) has published a The available scientific evidence does not show that any health series of Questions and Answers for consumers relating to radio problems are associated with using wireless phones.
Page 125
health hazard and to repair, replace or recall the phones so that FDA shares regulatory responsibilities for wireless phones with the hazard no longer exists. the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety Although the existing scientific data do not justify FDA regulatory guidelines that limit RF exposure.
Page 126
cancer-causing chemicals so as to be pre-disposed to develop provide data that is directly applicable to human populations, but cancer in absence of RF exposure. Other studies exposed the ten or more years' follow-up may be needed to provide answers animals to RF for up to 22 hours per day.
Page 127
FDA and Cellular Telecommunications & Internet Association away from your body or use a wireless phone connected to a remote (CTIA) have a formal Cooperative Research and Development antenna. Agreement (CRADA) to do research on wireless phone safety. Again, the scientific data do not demonstrate that wireless FDA provides the scientific oversight, obtaining input from phones are harmful.
was not based on scientific evidence that any health hazard more than a metallic accessory attached to the phone. Studies exists. have shown that these products generally do not work as Do hands-free kits for wireless phones reduce advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.
wireless phones and helped develop a voluntary standard International Commission on Non-Ionizing Radiation Protection: • sponsored by the Institute of Electrical and Electronic Engineers http://www.icnirp.de (IEEE). This standard specifies test methods and performance National Radiation Protection Board (UK): • requirements for hearing aids and wireless phones so that no http://www.hpa.org.uk/radiation interference occurs when a person uses a compatible phone and US Food and Drug Administration:...
Page 130
Position your wireless phone within easy reach. Be able to Do not engage in stressful or emotional conversations that access your wireless phone without removing your eyes may be distracting. Make people you are talking with from the road. If you get an incoming call at an aware you are driving and suspend conversations that inconvenient time, let your voice mail answer it for you.
"The wireless industry reminds you to use your phone safely when Individual susceptibility to noise-induced hearing loss and driving." potential hearing problem varies. Additionally, the amount of sound produced by a portable audio device varies depending on For more information, please call 1-888-901-SAFE, or visit our the nature of the sound, the device settings, and the headphones web-site www.ctia.org.
Avoid using headphones after exposure to extremely loud noises, such • National Institute on Deafness and Other Communication Disorders as rock concerts, that might cause temporary hearing loss. Temporary National Institutes of Health hearing loss might cause unsafe volumes to sound normal. 31 Center Drive, MSC 2320 Do not listen at any volume that causes you discomfort.
As with other mobile radio transmitting equipment, users are Should turn the phone OFF immediately if there is any reason to • advised that for the satisfactory operation of the equipment and suspect that interference is taking place; for the safety of personnel, it is recommended that the Should read and follow the directions from the manufacturer of your •...
Page 134
The wireless telephone industry has developed a rating system is considered acceptable for normal use. A sum of 6 is for wireless phones, to assist hearing device users find phones considered for best use. that may be compatible with their hearing devices. Not all phones have been rated.
Potentially Explosive Environments The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Switch your phone off when in any area with a potentially Other Medical Devices explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily If you use any other personal medical devices, consult the injury or even death.
Restricting Children's access to your Phone Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Your phone is not a toy. Children should not be allowed to play Emergency calls may not be possible on all wireless phone with it because they could hurt themselves and others, damage networks or when certain network services and/or phone...
Product Performance Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending Getting the Most Out of Your Signal Reception or sitting on it. The quality of each call you make or receive depends on the Other Important Safety Information signal strength in your area.
Maintaining Your Phone's Peak Performance features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. For the best care of your phone, only authorized personnel should Other conditions and restrictions may apply. See your service service your phone and accessories.
Page 139
Use only Samsung-approved batteries and recharge your battery only • with Samsung-approved chargers. When a charger is not in use, Do not get your phone or battery wet. Even though they will dry and •...
Care and Maintenance Do not paint the phone. Paint can clog the device's moving parts and • prevent proper operation. Your phone is a product of superior design and craftsmanship Do not put the phone in or on heating devices, such as a microwave •...
Leather Case 90 Days been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the Holster 90 Days battery are broken or show evidence of tampering, or (iii) the...
Page 142
SAMSUNG. OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR If SAMSUNG determines that any Product is not covered by this PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF Limited Warranty, Purchaser must pay all parts, shipping, and TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
Page 143
Limited Warranty. The agents, employees, REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR distributors, and dealers of SAMSUNG are not authorized to make UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY modifications to this Limited Warranty, or make additional FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH warranties binding on SAMSUNG.
Page 144
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed in brackets. sort, it is recommended that the device be returned to Samsung’s Customer Care Center for an Extended File System (EFS) Clear...
Index Numerics Launching Browser Erase Logs Using Browser Incoming 2-Sec Pause Using Links Missed Outgoing Adding a New Contacts Entry Store Numbers Call Answer Dial Method Calls Menu Call Answer Mode Adjust Camera Call Block Key Tone Brightness Call Functions Ringer Setting Color Tones Answering a Call...
Page 146
Card Memory Wallpaper Understanding this User Manual Formatting Draft Folder Voicemail Management Draft Messages Go Back One Menu Changing Your Settings Clear Key Edit Contacts Name and Numbers Contacts End Key Health and Safety Information Add Pauses Entering Text Adding a New Contacts Entry Entering Numbers Icon Glossary Edit Name and Numbers...
Page 147
Review, Edit, and Erase Memos Lock Calculator Memory Card Silent Calendar Formatting Standby Memo Pad Memory Card (Optional) Talk Voice Memo Install Vibrate World Time Message Folder M-Ratings Phone Info Draft Box Msg Setting Sub Menu ESN/MEID Erase Messages Multi Shot Icon Glossary Inbox Multimedia...
Page 148
Picture Messages Restriction Phone Info Online Viewing Send Key Phone Settings Receiving Send Picture Messages Quick Search Send in Camera Mode Settings Resetting Your Phone Airplane Mode Restriction Alerts Ringer Type QWERTY Keypad Auto Answer Security Auto Retry Security Settings Receive Messages in Call Backlight Set Time...
Page 149
Ringer Type Editing an existing Contacts entry VoiceSignal Volume/Vibrate Finding a Contacts entry About VoiceSignal Standard Limited Warranty Understanding Your Phone Voice Memos Standby Mode Closed View of Your Phone Store Numbers After a Call Command Keys Wait Display Screen Warranty Information Features of Your Phone Taking Pictures...