Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment, and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.
Page 5
English Labels WARNING: Do not connect a telephone line to the drawer kick-out connector or the display module connector; otherwise the printer and the telephone line may be damaged. CAUTION: Thermal head and paper feed motor for the thermal section are hot. Connectors power interface...
English Installing the Paper Roll Note: Do not use paper rolls that have the paper glued or taped to the core because they might cause a paper jam. To prevent paper jams, make sure that nothing obstructs paper coming out of the paper exit, and do not pull the paper out of the printer. 4 TM-H6000 User’s Manual...
English Installing the Ribbon Use the EPSON ERC-32. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. 1. Turn on the printer. Turn the knob on the ribbon cartridge.
English Inserting Slip Paper ➀ ➀ ➀ ➀ ➁ ➁ ➁ ➁ Troubleshooting Error light on or blinking. Make sure that the printer cover is properly closed. Turn off the printer, and check for a paper jam. The autocutter is jammed or the paper roll cover will not open. 1.
English Cleaning the Print Head CAUTION: After printing, the print head can be very hot. Be careful not to touch it. Also, let it cool before you clean it. Do not damage the print head by touching it with your fingers or any hard object. Open the paper roll cover, and clean the thermal element (the green part) of the print head with a cotton swab moistened with an alcohol solvent (ethanol, methanol, or IPA).
English 1. Wait until the SLIP light blinks. Then insert the check face up, with the right side of the check against the right side of the paper guide as far as it will go. Be sure that the MICR characters are on the right.
If your printer has the optional endorsement printing mechanism, install the endorsement ribbon following the steps below: Use the EPSON ERC-41. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty.
Page 12
English 1. Turn the ribbon cassette knob. Then open the unit cover. Inside the printer, push the levers backward to open the unit. Note: Do not open the unit during printing. 2. Insert the ribbon into the printer in the position shown, and turn the knob again to seat the ribbon.
English EPSON Ecology Label This product is in compliance with the EPSON ecology label requirements. Please see the following link for detailed information on label criteria. (http://www.epson.co.jp/e/) TM-H6000 User’s Manual 11...