Advertisement
Quick Links
Advertisement
Related Manuals for Asus Desktop ExpertCenter D700SEES
Summary of Contents for Asus Desktop ExpertCenter D700SEES
- Page 1 Desktop_ExpertCenter_D700SEES/D700SE_CZ Service Manual...
- Page 2 INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR INTHIS MANUAL OR PRODUCT.
- Page 3 ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS' suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
- Page 4 Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Before handling components, use a grounded wrist strap or touch a safely grounded object to avoid damaging them due to static electricity.
- Page 5 Table of Contents ⚫ Desktop_ExpertCenter_D700SEES/D700SE_CZ Overview ⚫ Components Top View ⚫ Components Bottom View ⚫ Appropriate Tools ⚫ Disassembly steps : • SIDE COVER • BEZEL ASSY • • VGA CARD (GT1030/T400/A2000) • AIR DUCT AND SPRING SCREW COOLER • •...
- Page 6 Desktop_ExpertCenter_D700SEES/D700SE_CZ Overview Rear Panel View Front Panel View ❶ Power Button/LED ❶ PS/2 Keyboard Port ❷ HDD LED ❷ PS/2 Mouse Port ❸ Headphone port ❸ DisplayPort™ ❹ Headphone/Mic combo jack ❹ HDMI™ port ❺ USB 3.2 Gen 1 port ❺...
- Page 7 Components Top View ♦ Bezel Assy ♦ HDD SATA Cable ♦ Side Cover ♦ HDD ♦ Air Duct ♦ CPU ♦ HDD Carrier ♦Spring Screw Cooler ♦ DIMM Module ♦ RF Cable SMA ♦ WLAN Module ♦ SSD ♦ SSD Thermal Pad ♦...
- Page 8 Components Bottom View ♦ SSD ♦ Power Switch BD ♦ DIMM Module ♦ CPU ♦ Mainboard ♦ WLAN Module ♦ HDD ♦ VGA Card (GT1030) ♦ VGA Card (T400) ♦ VGA Card (A2000) Back...
- Page 9 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the Desktop_ExpertCenter_D700SEES/D700SE_CZ desktop. ♦ Screwdriver ♦ Alcohol 95% ♦ Glove ♦ Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. #1 #2 ♦ Plastic Blade ♦...
- Page 10 SIDE COVER Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) Step 1 : Remove screws*2pcs. Step 2 : Detach the side cover. SCREW #6-32 L6*H8.5 8.0± 0.8 SIDE COVER Back...
- Page 11 BEZEL ASSY Disassembly Notice Please be sure to disconnect the system from power source. Step 1 : Disengage the latches*4 (red mark) and remove the bezel assy. BEZEL ASSY Back...
- Page 12 Disassembly Notice Please be sure to disconnect the system from power source. Step 1 : Press the metal latch (red mark) and rotate the HDD/ODD bracket. Step 2 : Disconnect the HDD power and SATA cables. Step 3 : Detach the HDD module from the chassis. Step 4 : Remove the HDD from the HDD carrier.
- Page 13 VGA CARD (GT1030/T400/A2000) Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Remove the screws*2 (red mark). Step 2 : Open the retaining latch. Step 3 : Detach the VGA card. VGA CARD (GT1030) VGA CARD (T400) VGA CARD (A2000)
- Page 14 VGA CARD (GT1030/T400/A2000) RE-ASSEMBLY Please be sure to disconnect the system from power source. Assembly Notice Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Stick the EMI SHIELDING GASKETS* in the rear of the chassis as shown. *The quantity of GASKET will vary by SKU.
- Page 15 AIR DUCT and SPRING SCREW COOLER Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) Cooler Screw 8.0± 0.8 Step 1 : Detach the air duct. Step 2 : Disconnect the cooler cable (yellow mark). Step 3 : Loosen cooler screws*4pcs (red mark) then take out spring screw cooler.
- Page 16 Disassembly Notice Please be sure to disconnect the system from power source. Step 1 : Release the load lever from the retention tab. Step 2 : Pull the load lever. Step 3 : Open the CPU cover. Step 4 : Remove the CPU. Disassembly Notice Pin facing down on CPU packaging to protect the CPU.
- Page 17 CPU RE-ASSEMBLY Please be sure to disconnect the system from power source. Assembly Notice Please make sure to re-apply thermal grease on CPU Die, if spring screw cooler have to be reassembled. CPU Assembly Notice Step 1 : Please follow below instructions to assemble CPU. Using dust-free cloth with 95% alcohol to clean up the residual thermal grease on CPU&...
- Page 18 DIMM MODULE Disassembly Notice Please be sure to disconnect the system from power source. Step 1 : Release holding clip then remove DIMM modules*4. Assembly Notice Please follow the below criteria to populate DIMM slots. DIMM MODULE Back...
- Page 19 WLAN and WLAN ANTENNA CABLE Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Remove the screw*1 (red mark) and open the retaining latch. SCREW M.2*3L 3.2±...
- Page 20 SSD MODULE (Gen4 M.2) Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW M2*7.5L 2.0± 0.2 Step 1 : Remove the screw*1 (red mark) and detach the SSD module assembly. SCREW M2 L4*H0.8 2.0±...
- Page 21 SSD MODULE (Gen4 M.2) RE-ASSEMBLY Please be sure to disconnect the system from power source. Assembly Notice SSD SINK PKG KIT Step 1 : Place SSD into the bracket. Step 2 : Place the thermal pad (blue mark). Step 3 : Remove the SSD heatsink. Step 4 : Fix SSD heatsink using screws*2 (yellow mark).
- Page 22 SSD MODULE (Gen3 M.2) Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW M2 L4*H0.8 2.0± 0.2 Step 1 : Remove the screw*1 (red mark) and detach the SSD. Step 2 : Remove the thermal pad (yellow mark). SMART CARD SIDE CPU SIDE SSD MODULE...
- Page 23 SSD MODULE (Gen3 M.2) RE-ASSEMBLY Please be sure to disconnect the system from power source. Assembly Notice Step 1 : Place the thermal pad (yellow mark). Step 2 : Install SSD and fix using screw*1 (red mark). SMART CARD SIDE CPU SIDE Back...
- Page 24 POWER SUPPLY Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Disconnect the cables*2 (yellow mark). Step 2 : Remove the screws*3 (red mark). Step 4 : Remove the Power supply. POWER SUPPLY Back...
- Page 25 POWER SWITCH BD Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Remove the screws*2 (red mark). Step 2 : Disconnect the cable (yellow mark) from the Power Switch BD. Step 3 : Disconnect the cable (yellow mark) from the mainboard.
- Page 26 DISCONNECT THE CABLES Disassembly Notice Please be sure to disconnect the system from power source. Step 1 : Cut the cable ties. Step 2 : Remove the SATA 6G, HSG2.0 TO SATA6P SATA15P and SW CABLE (yellow mark). Step 3: Remove the STAND SCREW*6pcs (red mark).
- Page 27 CABLE ASSEMBLY NOTICE Please be sure to disconnect the system from power source. Assembly Notice Connect the PARALLEL and COMPORT CABLEs to Connect the other cables to the MB connectors as shown: the MB connectors as shown: POWER 4 PIN POWER COMPORT2 6 PIN...
- Page 28 CABLE ASSEMBLY NOTICE Please be sure to disconnect the system from power source. Assembly Notice Please follow below cable routing guidelines when re-assembling the system. Back...
- Page 29 REAR I/O COVER Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW M3*6L 4.0± 0.4 Step 1 : Remove the screws*2 (red mark). Step 2 : Remove rear I/O cover. REAR I/O COVER Back...
- Page 30 FRONT I/O BRACKET Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW #6-32 L6*H2.3 8.0± 0.8 Step 1 : Remove the screw*1 (red mark). Step 2 : Remove front I/O bracket. FRONT I/O BRACKET Back...
- Page 31 MAINBOARD Disassembly Notice Please be sure to disconnect the system from power source. Screws Spec Torque (kgf-cm) SCREW M3*4L 5.5± 0.55 Step 1 : Remove the screws*9 (red mark). Step 2 : Remove the mainboard. MAINBOARD (top view) MAINBOARD (bottom view) Back...
- Page 32 MAINBOARD Disassembly Notice Please be sure to disconnect the system from power source. AL FOIL*2pcs and EMI GASKET*1pc placement. Note: This material is not in 60 BOM, when L3/L4 repair is done, do not add a new one. Assembly Notice When assembling the MAINBOARD, please follow the steps below to install the AL FOIL and EMI GASKET.