Advertisement
Quick Links
Page
1
(20)
SERVICE MANUAL
Level 1&2
RM-258
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
RM-259
Transceiver characteristics:
Band:
RM-258: -EGSM: Dual-band 900/1800MHz
RM-259: -GSM: Dual-band 850/1900MHz
Display:
Main LCD: 128x160 pixel; 65k colors
Front LCD: 96x68 pixel; black & blue colors
Camera:
VGA Camera 640x480 pixels
Operating System:
Series 40
Connections:
Wireless: Bluetooth
Connector: Easy Flash II Connector
Memory card:
-------------------------
Transceiver with BL-4B Li-Ion battery pack
Talk time
up to 7h
2760 RM-258/RM-259
Service Manual Level 1&2
Standby
Note
Depends on network
up to 13 days
parameters
ISSUE 2
Advertisement
Related Manuals for Nokia Care 2760
Summary of Contents for Nokia Care 2760
- Page 1 Connector: Easy Flash II Connector Memory card: ------------------------- Transceiver with BL-4B Li-Ion battery pack Talk time Standby Note Depends on network up to 7h up to 13 days parameters Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 2 EXPLODED VIEW SPARE PARTS OVERVIEW LEVEL 2 SOLDER COMPONENTS SERVICE DEVICES SW-UPDATE UPPER BLOCK DISASSEMBLY UPPER BLOCK ASSEMBLY HINTS LOWER BLOCK DISASSEMBLY LOWER BLOCK ASSEMBLY HINTS CAMERA EXCHANGE INSTRUCTION Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 3 Approved The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential.
- Page 4 5. Ensure all cables and wires are repositioned correctly. ESD PROTECTION Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use.
- Page 5 Batteries’ performance is particularly limited in temperatures well below freezing. Do not dispose batteries in a fire! Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 6 (LEVEL 3&4 ONLY) I0211 D-COVER (A5) I0216 SCREW I0218 = These parts can not be reused after removal. BATTERY COVER I0219 = only available as Ver. 1.0 assembly Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 7 HINGE MODULE I0101 SCREW I0218 SCREW I0009 = These parts can not be reused SCREW COVER after removal. I0010 BATTERY COVER = only available as I0219 Ver. 1.0 assembly Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 8 Service Manual Level 1&2 LEVEL 2 SOLDER COMPONENTS 2760 RM-258 / RM-259 Level 2 solder components Solder components only for LEVEL 2 V2403 V2404 F2000 X2400 Ver. 1.0 Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 9 Service Bulletin (SB-011) on NOKIA On- line. Supplier or manufacturer contacts for tool re-order can be found in “Recom- mended service equipment” docu- ment on NOKIA Online. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 10 To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. For flashing use the CA-112DS cable. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 11 UPPER BLOCK DISASSEMBLY 1. Nokia 2760 Upper Block Disassembly and Assembly Hints. 2. You will need the Nokia Standard Toolkit version 2 as well as the hinge opening tool SS-6. and SS-88 camera removal tool Also refer to the General Mechanical Guideline Video for additional hints about the tools and component handling.
- Page 12 For Assembly note the guide pin. 11. Gently open the connector of the LCD PM 128x160 with the 12. Carefully open the PWB FLEX connector. Avoid damaging SS-93. surrounding components. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 13 93. Take care to the surrounding components. 17. Carefully separate the LCD PM 96x68 from the UI PWB ASSY. 18. Ensure that no adhesive residues remain. The Disassembly procedure is now finished. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 14 3. Always use new screws when assembling the unit. 4. Tighten the screws to the torque of 15Ncm in the order shown. 5. Finally fit the new SCREW COVER. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 15 LOWER BLOCK DISASSEMBLY 1. Nokia 2660 Lower Block Disassembly. 2. You will need the Nokia Standard Toolkit version 2 as well as the hinge opening tool SS-6. Also refer to the General Mechanical Guideline Video for additional hints about the tools and component handling.
- Page 16 9. Gently open the PWB FLEX connector with the SS-93. Avoid 10. Remove the ENGINE MODULE. damaging surrounding components. 12. Unlock the ANTENNA MODULE with SS-93... 11. Remove the KEYMAT. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 17 16. Gently open the Hinge but do not separate the parts yet. shown and carefully unlock the HINGE MODULE. 17. Carefully move the PWB FLEX into the hole of the C-COVER... 18..as shown in the picture. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 18 21. Now, separate the C-COVER from the Upper Block. 22. Push out the HINGE MODULE from the B-COVER... 23..and remove it. The disassembly procedure is now finished. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 19 4. Fit the KEYMAT before starting the assembly procedure. 5. Always use new screws when assembling the unit. 6. Tighten the four screws to the torque of 15Ncm in the order shown. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
- Page 20 3. The read out of the Camera Module starts automatically. 4. Press “Ok” 5. Press “Upload (1)” to store the new data into the phone. 6. Press “Ok (2)” to close the procedure. Page (20) ISSUE 2 CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.