hit counter code
  1. Manuals
  2. Brands
  3. Raise3D Manuals
  4. 3D Printers
  5. Pro3 HS Series
  6. User manual

Raise3D Pro3 HS Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Pro3 HS Series
Printer
User Manual
* Please review this entire manual before operating the printer.
WARNING
This is a class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
www.raise3d.com
29.001-EN.3.0.20240412

Advertisement

Table of Contents
loading

Related Manuals for Raise3D Pro3 HS Series

Summary of Contents for Raise3D Pro3 HS Series

  • Page 1 Pro3 HS Series Printer User Manual * Please review this entire manual before operating the printer. WARNING This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
  • Page 2 The contents of this User Manual may be updated overtime. For the latest version, scan the QR code or visit the link below. https://support.raise3d.com/...

  • Page 3: Table Of Contents

    Raise3D Pro3 HS Series Printer User Manual CONTENTS Safety Precautions ..........................2 Safety Signs ............................6 A. Declarations and Safety Statements .................... 7 B. Technical Specifications ....................... 10 C. Main Parts ............................. 12 D. Hardware Installation ........................16 E. Run the Offset Calibration ......................18 E.1 Run the Left Z Probe Offset ....................
  • Page 4 The information in this manual is subject to change without notice. Shanghai Fusion Tech Co. Ltd. (also referred to as "Raise3D" here) is not responsible for errors in this manual. Raise3D does not take any responsibility for incidental or secondary losses caused by the supply, performance or use of this manual.

  • Page 5: Safety Precautions

    Raise3D Pro3 HS Series Printer User Manual Safety Precautions Safety Precautions Please read the safety information to ensure that you use the appliance safely. General Information You can find general information about this instruction manual here. Read this instruction manual carefully. Only this will ensure you use the appliance ▪...
  • Page 6 Raise3D Pro3 HS Series Printer User Manual Safety Precautions  Connect and operate the appliance only in accordance with the specifications on the rating plate.  Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
  • Page 7 Raise3D Pro3 HS Series Printer User Manual Safety Precautions  Place the appliance on a clean, even, solid surface. If tubes and power cords have been laid incorrectly, this can cause a tripping hazard. ▪  Lay tubes and power cords in such a way that there is no risk of tripping.
  • Page 8 Raise3D Pro3 HS Series Printer User Manual Safety Precautions  Do not touch the edge of the spatula.  Keep children away from the spatula. Some parts in the printer are sharp and may cause injury. ▪ When removing the printing model, please refer to the Chapter of Remove the Printed ▪...

  • Page 9: Safety Signs

    Raise3D Pro3 HS Series Printer User Manual Safety Signs Safety Signs Hot Surface: The hot surface sign indicates the presence of devices with high temperatures. Always be extremely careful when working around heated components. Wait half an hour after switching off the printer before handling parts to prevent burns.

  • Page 10: Declarations And Safety Statements

    This product is marked with "UKCA" and in conformity with the relevant UK statutory requirement: Radio Equipment Regulations 2017. Full text of the UK declaration of conformity is available at https://www.raise3d.com. UK sales partner company name:3DGBIRE Ltd UK sales partner company address: 3DGBIRE, Unit 44/45 Chorley North Industrial...
  • Page 11 Printer User Manual Declarations and Safety Statements Electromagnetic Compatibility - EMC Simplified EU Declaration of Conformity Raise3D declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at https://www.raise3d.com.
  • Page 12 The printer can be stored at room temperature for 4-6 hours before operating. 2. Filament and Electrical Precautions It is strongly recommended to use Raise3D official filaments and/or default settings for better performance. The Raise3D printer is designed to be highly compatible with Raise3D official filaments.

  • Page 13: Technical Specifications

    Raise3D Pro3 HS Series Printer User Manual Technical Specifications Technical Specifications Pro3 HS Pro3 Plus HS Printer Single Extruder Single Extruder Dual Extruder Print Dual Extruder Print Build Volume Print Print (W×D×H) 300×300×300 mm 255×300×300 mm 300×300×605 mm 255×300×605 mm Machine Size 620×626×760 mm...
  • Page 14 Raise3D Pro3 HS Series Printer User Manual Technical Specifications Logic Controller NXP ARM Cortex-A9 Quad 1GHz Memory 1 GB Onboard Flash 16 GB Embedded Linux Ports USB 2.0×2, Ethernet×1...

  • Page 15: Main Parts

    Raise3D Pro3 HS Series Printer User Manual Main Parts Main Parts Pro3 HS G. Camera A. Top Cover H. Filament Guide Tube B. Extruder I. Flat Cable C. Fans D. Hot End J. Filament Run-out Sensor E. Touch Screen K. RFID Sensor L.
  • Page 16 Raise3D Pro3 HS Series Printer User Manual Main Parts A. Top Cover The upper cover of the printer. B. Extruder The part extruding filament to the hot end. Brand-new unitized extruders, which are more convenient for assembly and dismounting are featured on this printer. The printer’s dual extrusion structure can adapt to a variety of filaments.
  • Page 17 Raise3D Pro3 HS Series Printer User Manual Main Parts It stores the motion controller board. O. USB Interface 2 USB2.0 interfaces. P. Ethernet Port RJ45 is connected to the port to connect your printer to a network. Note: The length of the network cable should not exceed 3 m.
  • Page 18 Raise3D Pro3 HS Series Printer User Manual Main Parts Raise3D Supplies and Accessories Power Cable Hex Wrenches Hyper Speed Carbon Fiber Filament (×1) Filament (×1) Filament Guide USB Storage Heat Resistant Filament Holder Tube (×2) Gloves (×2) Spatula Nozzle Cleaning Kit Tweezers Screws &...

  • Page 19: Hardware Installation

    Raise3D Pro3 HS Series Printer User Manual Hardware Installation Hardware Installation Remove Remove (x24) Remove, but do not cut, the four shipping Before powering on the printer, make sure zip ties for fixing the Z axes. Keep the to peel off all the yellow stickers and remove shipping zip ties safe for further installation the 24 security spacers.
  • Page 20 Raise3D Pro3 HS Series Printer User Manual Hardware Installation After the printer is powered on, the printer As shown in the left figure, the printer has will enter the boot process. It takes about 60 entered the Start-up Wizard. You can refer...

  • Page 21: Run The Offset Calibration

    Next, select the appropriate filament template, for example, Raise3D Hyper Speed PLA, Raise3D Premium PLA, and so on, or you can add a new filament template. Assign filaments to different nozzles according to your needs. Raise3D Hyper Speed PLA filament is used for calibration in this tutorial.
  • Page 22 4. Run the 5-step Offset Calibration sequentially according to the prompts on the screen. Important: The Pro3 HS series printer come with a roll of Raise3D Hyper Speed PLA that supports the offset calibration for a single nozzle. Therefore, you can complete the first step of "Calibrate Left Z Offset"...

  • Page 23: Run The Left Z Probe Offset

    Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration E.1 Run the Left Z Probe Offset 1. Enter the Left Z Probe Offset. Make sure your nozzle and build plate are clean. 2. With a 0.3 mm feeler gauge, adjust the distance between the nozzle and the build plate as indicated by the prompts on the screen.
  • Page 24 3. After adjusting the distance between the nozzle and the build plate, follow the prompt on the screen to load Hyper Speed PLA filament. Note: Two spools of Raise3D Hyper Speed PLA filament are used for calibration in this tutorial.
  • Page 25 Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration 5. After the model is printed, compare the model with the on-screen example. Hold the model up against a light and select the first block that doesn’t leak light. The printer will automatically adjust the offset value of the left nozzle.

  • Page 26: Run The Right Z Probe Offset

    Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration E.2 Run the Right Z Probe Offset 1. Enter the Right Z Probe Offset. Make sure your nozzle and build plate are clean. 2. With a 0.3 mm feeler gauge, adjust the distance between the nozzle and the build plate according to the prompts on the screen.
  • Page 27 3. After adjusting the distance between the nozzle and the build plate, follow the prompt on the screen to load filament. Note: Two spools of Raise3D Hyper Speed PLA filament are used for calibration in this tutorial. 4. After the filaments are successfully installed, the printer will start printing a 9-square...
  • Page 28 Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration 5. After the model is printed, compare the model with the on-screen example. Hold the model up against a light and select the first block that doesn’t leak light. The printer will automatically adjust the offset value of the left nozzle.

  • Page 29: Bed Leveling

    Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration E.3 Bed Leveling 1. The purpose of this step is to calibrate the flatness of the build plate. The printer will automatically detect 64 points on the build plate and adjust the flatness of the build plate.

  • Page 30: R-Nozzle Xy Offset

    PLA filaments, otherwise this step cannot be performed. In this tutorial, the left and right extruders are loaded with Raise3D Hyper Speed PLA filaments. 2. After printing, according to the instructions on the screen, select a pair of lines that are completely aligned on the X model and the Y model respectively.
  • Page 31 Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration 3. Input the serial number on the screen. The printer will automatically calibrate the XY Offset of the right nozzle.

  • Page 32: Dual-Color Cube

    PLA filaments, otherwise this step cannot be performed. In this tutorial, the left and right extruders are loaded with Raise3D Hyper Speed PLA filaments. 2. After printing, please compare the printed dual-color cube with the sample graphic on the...
  • Page 33 Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration 3. If there is no gap between the color blocks, it means that the XYZ direction offset value of the right nozzle is within a reasonable range. Please click "Done" to complete the 5-step Offset Calibration.
  • Page 34 Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration...

  • Page 35: Calibration Finished

    Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration E.6 Calibration Finished After the 5-step calibration is completed, you can start your first high-speed print!

  • Page 36: Ideamaker Installation

    Raise3D Pro3 HS Series Printer User Manual ideaMaker Installation ideaMaker Installation Download the latest version from: https://www.raise3d.com/download/. Open the installer and select the installation language. Select the appropriate ideaMaker install location and click “Next”.
  • Page 37 Follow the instructions provided by the guide and click “Install”. After the installation is complete, click “Next” to go to the next step. Click “Finish” and ideaMaker is installed. Download the latest version from: https://www.raise3d.com/download/. Drag the ideaMaker icon (left) into the Application folder on the right side.
  • Page 38 Raise3D Pro3 HS Series Printer User Manual ideaMaker Installation...

  • Page 39: Dual Extruder Printing

    G.1 Load Filament Open the side door of the printer and place the filament holder on the installation point. Place a spool of Raise3D Hyper Speed PLA printing filament on the holder. Note: If the filament is installed at points B and D, it is recommended to place the filament in a clockwise direction.
  • Page 40 Important: These instructions are based on the properties of Raise3D Hyper Speed PLA filament. The Pro3 HS series printers come with one roll of Raise3D Hyper Speed PLA (Red) and one roll of Raise3D Hyper Core ABS CF15 (Black). We recommend using Raise3D Hyper Speed PLA for testing and initial setup.

  • Page 41: Slice Model

    G.2 Slice Model 1. After downloading and installing ideaMaker onto your computer, import a model into ideaMaker. 2. Select the appropriate Raise3D Pro3 HS or Pro3 Plus HS printer. Select extruder filament templates. 3. Select a desired slicing template for the filament.
  • Page 42 Raise3D Pro3 HS Series Printer User Manual Dual Extruder Printing 2) ideaMaker will judge all parameters related to speed, acceleration and flow rate in the current template settings. As long as one parameter value reaches L1 or L2, after the template is saved, it will add L1 or L2 labels to the template (L0 will not be displayed).
  • Page 43 Raise3D Pro3 HS Series Printer User Manual Dual Extruder Printing Acceleration judgment includes Printing Acceleration, Inner Shell Acceleration and Outer Shell Acceleration, as shown in the red box below. Volumetric flow rate calculation formula: Volumetric Speed = Layer Height * Extrusion Width * Speed The volumetric flow rate is determined by the Layer Height, Extrusion Width, and Speed.
  • Page 44 Pro3 HS Series Printer User Manual Dual Extruder Printing 3) In ideaMaker, Raise3D filaments have threshold limits for speed, acceleration, and volumetric flow rate in Standard Mode and Hyper Speed Modes respectively, and if each speed exceeds the threshold, ideaMaker will display an alert.
  • Page 45 4. After reviewing the parameters, click "Start Slicing" to slice the model. 5. After slicing, you can save the file locally and import it to the printer, or you can upload it directly to the Pro3 HS series printer to start your Hyper Speed printing.

  • Page 46: Start Printing

    Raise3D Pro3 HS Series Printer User Manual Dual Extruder Printing G.3 Start Printing Insert the USB device that contains your sliced model files (.gcode or .data) into the USB port on the side of the touchscreen Select “Print” on the touchscreen and choose “USB Storage”...

  • Page 47: Remove The Printed Model

    Raise3D Pro3 HS Series Printer User Manual Remove the Printed Model Remove the Printed Model Make sure the printer is idle, and there is at least a 10 cm gap between the printed model’s top and the nozzle. This is to prevent the nozzle from scratching the model or damaging the model when it is taken out.
  • Page 48 Raise3D Pro3 HS Series Printer User Manual Remove the Printed Model Bend the printing surface repeatedly along the longer span of the model until the model is detached from the printing surface. Note: Do not directly touch the edge of the printing surface to avoid injury.

  • Page 49: User Interface

    Raise3D Pro3 HS Series Printer User Manual User Interface User Interface Status Bar  EVE, Menu title, Settings button  Hot end and heated bed temperatures  Current model name, total print time, current printing  status and height Visual display of current model ...
  • Page 50 Raise3D Pro3 HS Series Printer User Manual User Interface Moving step distance setting  Disable Motor button  X/Y/Z axes move/home  Load and unload function for the L&R extruders  Utilities Choose where to load the print job from ...

  • Page 51: Experiencing Difficulties/ Contact Information

    Raise3D Pro3 HS Series Printer User Manual Experiencing Difficulties/ Contact Information Experiencing Difficulties/ Contact Information If you run into any issues during this guided setup, please contact our expert technicians by creating a ticket online at https://help.raise3d.com/support/tickets/new.
  • Page 52 Raise3D Pro3 HS Series Printer User Manual US Office: Raise 3D Technologies Inc. 13310 Pike Road, Stafford, USA Tel: +1 888 963 9028 EU Office: Raise3D B.V. Stationsplein 45 Unit A4.004, Rotterdam, Netherlands Manufacturer: Shanghai Fusion Tech Co., Ltd. Floor 13 A5, 1600 North Guoquan Road, Yangpu District, Shanghai, P.R. China Tel: +86 400 6367 888 (For the Mainland of China only) www.raise3d.com...

This manual is also suitable for:

Pro3 plus hs

Table of Contents