Related Manuals for unicraft K Series
Summary of Contents for unicraft K Series
- Page 1 Operating Instructions Chain Hoist K 1000, K 2000, K 3000 K 5000, K 10000 Chain Hoist K 1000...
-
Page 2: Table Of Contents
D-96103 Hallstadt 4.1 Type plate............7 Fax: 0049 (0) 951 96555 - 55 5 Transport, packaging, storage.......7 5.1 Transport ............7 E-Mail: info@unicraft.de 5.2 Packaging............7 Internet: www.unicraft.de 5.3 Storage ............... 7 6 Description of the device........8 7 Start-up..............8 8 Operation ..............8 8.1 Operating conditions .......... -
Page 3: Introduction
Introduction Introduction 1.3 Limitation of liability All information and notes in these operating instructions You have made a good choice by purchasing the UNI- were summarised while taking applicable standards CRAFT Chain Hoist. and rules, the state-of-the-art technology and our long- term knowledge and experiences into consideration. -
Page 4: Obligations Of The Operating Company
Safety Obligations of the operating company CAUTION! If the chain hoist is used for commercial purposes, the This combination of symbol and signal words indi- operating company of the chain hoist must comply with cates a potentially dangerous situation which may the legal working safety regulations. -
Page 5: Requirements To Staff
Safety 2.3 Requirements to staff 2.4 Personal protective equipment The personal protective equipment serves to protect Qualifications persons against impairments of safety and health while working. The staff member has to wear personal protec- The different tasks described in this manual represent tive equipment while performing different tasks on and different requirements to the qualification of the persons with the machine which are indicated in the individual... -
Page 6: Safety Information For Operating Personnel
Intended use It is important to point out that the making of any unau- Intended use thorised modifications or changes to the machine is not permitted. The chain hoist must only be used for lifting and Operating personnel must always ensure that the maxi- lowering of machines up to the maximum specified load. -
Page 7: Technical Data
Technical data Technical data Transport, packaging, storage 5.1 Transport Model K 1000 K 2000 K 3000 Load-carrying capacity (t) Check the chain hoist on delivery for any visible trans- Stroke (mm) 2500 2500 3000 portation damage. If you notice any damage to the de- vice please report this immediately to the carrier or Min. -
Page 8: Description Of The Device
Description of the device Description of the device Operation DANGER! Danger of life by crashing the load! Falling loads can cause serious injury or death. - Overload is vorbidden! Check that the load never exceeds the maximum load stated on the name- plate. -
Page 9: Operating Conditions
Care, maintenance and repair 8.1 Operating conditions 8.4 Sink a load Step 1: Sink the load steadily and evenly downwards. The working area has to be protected against fire and explosions and free from corroding and toxic sub- stances. CAUTION! Dangerous goods like molten, toxic or radioactive mate- Risk of crushing! rial must not be moved with the the chain hoist. - Page 10 Care, maintenance and repair If the chain hoist is not functioning properly, contact a Control of the brake system: specialised dealer or our customer service. Immediately reassemble all protective and safety equip- ATTENTION! ment after completing the repair and maintenance of the The brake system must be checked regularly! device.
- Page 11 Care, maintenance and repair Testing the load chain for wear Model K 1000, K 3000 K 5000, K 2000 K 10000 Continuous inspection of the chain hoist is a mandatory requirement in accordance with DIN 685 Part 5 or UVV Min.
-
Page 12: Testing The Chain Hoists
Testing the chain hoist 10 Testing the chain hoist 12 Spare parts DANGER! The chain hoist must be tested by a qualified person for Danger of injury by the use of wrong spare safe operation in accordance with the provisions of the parts! German Industrial Safety Ordinance and the BGR 500, Dangers may result for the user and damages as... -
Page 13: Spare Parts Drawing
Spare parts 12.2 Spare parts drawing In case of service, the following drawing shall help to identify the necessary spare parts. If necessary, send a copy of the parts drawing with the marked components to your authorised dealer. Fig. 6: Spare parts drawing K-Series | Version 3.03... -
Page 14: Ec Declaration Of Conformity
13 EC Declaration of Conformity According to machine directive 2006/42/EC Annex II 1.A Stürmer Maschinen GmbH Manufacturer/distributing company: Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt herewith declares that the following product Unicraft® Werkstatttechnik Product group: K 1000 Designation of the machine:: K 2000 K 3000 K 5000... -
Page 15: Maintenance Plan
Maintenance plan 14 Maintenance plan Maintenance plan K-Series 40 h 40 h 40 h 200 h as nec- 200 h as nec- annu- essary essary ally date operating Employee Signature hours K-Series | Version 3.03... - Page 16 www.unicraft.de...