Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................9 5.
Page 3
• Children should be supervised to ensure that they do not play with the appliance. • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. •...
Page 5
– Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug. as they can damage the cooling fans • Do not pull the mains cable to disconnect or impair the cooling system.
specified by the manufacturer of this • Switch off the appliance and let it cool appliance. down before cleaning. • Use only accessories recommended for • Do not use water spray and steam to this appliance by the manufacturer. clean the appliance. •...
Page 7
3.2 Built-in hobs CAUTION! Only use the built-in hobs after you assemble Do not drill or solder the wire ends. It is the hob into correct built-in units and work forbidden. surfaces that align to the standards. CAUTION! 3.3 Connection cable Do not connect the cable without cable •...
Page 8
After you assemble the hob, seal the ON-TOP INSTALLATION remaining gap between the glass ceramic and the worktop with silicone. Make sure the silicone does not get under the glass ceramic. 3.5 Attaching the seal - On-top installation 1. Clean the worktop around the cut out min.
How to install your Electrolux Induction Hob - Worktop installation min. 28 mm Find the video tutorial "How to install your Electrolux induction hob flush installation" by typing out the full name indicated in the graphic below. www.youtube.com/electrolux www.youtube.com/aeg How to install your Electrolux induction hob flush installation...
Page 10
4.2 Control panel layout Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. The antiscratch glass surface has a unique finishing texture which may change the way symbols and elements of the user interface appear in various lighting conditions. Sensor Function Description...
4.3 Display indicators Indicator Description There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐ ual heat. 5. BEFORE FIRST USE Refer to “Technical data” chapter. WARNING! CAUTION! Refer to Safety chapters. Make sure that the selected power fits 5.1 Power limitation the house installation fuses.
Page 12
6.3 Using the cooking zones 2. To deactivate a cooking zone, press 0. Place the cookware in the centre of the 6.5 PowerBoost selected zone. Induction cooking zones adapt This function makes more power available to to the dimension of the bottom of the the induction cooking zones.
Page 13
6.7 Timer options • Cooking zones are grouped according to the location and number of the phases in the hob. Each phase has a maximum Count Down Timer electricity loading. If the hob reaches the limit of maximum available power within Use this function to specify how long a one phase, the power of the cooking cooking zone should operate during a single...
Page 14
1. Place a pan without oil / fat on one of the • You can change the default heat level, if cold cooking zones on the left side. You needed. can use a single cooking zone or connect • For thick pieces of food or raw potatoes both zones using Bridge.
Page 15
6.10 SenseBoil® To deactivate the function after the boiling point has been reached, touch the slider and The function automatically adjusts the adjust the heat setting manually. temperature of water so that it does not boil If you activate Pause or remove the pot the over once it reaches the boiling point.
User settings between the settings press on the front Sym‐ Setting Possible options timer. To change the setting value press on the front timer. Sound On / Off (--) To exit the menu: press Power limitation 15 - 73 Hood mode 0 - 6 OffSound Control Alarm / error histo‐...
Page 17
7.3 Lock 7.5 Bridge You can lock the control panel while the hob operates. It prevents an accidental change of the heat setting. The function operates when the pot covers the centres of the two zones. For Set the heat setting first. more information on the correct placement of cookware refer to "Using To activate the function: press...
automatically and adjusts the speed of the fan. When you finish cooking and deactivate Automatic modes the hob, the hood fan may still operate for a certain period of time. After that time Automat‐ Boiling 1) Frying 2) the system deactivates the fan ic light automatically and prevents you from accidental activation of the fan for the...
Page 19
8.1 Cookware the cooking zone which results in slower heating. – For both safety reasons and optimal cooking results, do not use cookware For induction cooking zones a strong larger than indicated in "Cooking electro-magnetic field creates the heat in zones specification".
Page 20
Heat setting Use to: Time Hints (min) Keep cooked food warm. as neces‐ Put a lid on the cookware. sary 1 - 2 Hollandaise sauce; melt: butter, choco‐ 5 - 25 Mix from time to time. late, gelatine. Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
• Do not interrupt the signal between the work with this function refer to our consumer hob and the hood (e.g. with the hand, a website. The Electrolux cooker hoods that cookware handle or a tall pot). See the work with this function must have the symbol picture.
otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a Using cleaning tools different than the special hob scraper on the glass surface recommended ones will not be at an acute angle and move the blade on effective and may damage or the surface.
Page 23
Problem Possible cause Remedy You cannot select the maximum The other zones consume the maxi‐ Reduce the heat setting of the other heat setting for one of the cook‐ mum available power. cooking zones connected to the same ing zones. Your hob works properly.
Make sure, you operated the hob correctly. If not the servicing by a service 11. TECHNICAL DATA 11.1 Rating plate Model XH608BCCS PNC 949 599 368 00 Typ 62 D5A 01 AA 220 - 240 V / 400 V 2N, 50 Hz Induction 7.35 kW...
It changes with the material and dimensions of the cookware. 12. ENERGY EFFICIENCY 12.1 Product Information Model identification XH608BCCS Type of hob Built-In Hob Number of cooking zones Heating technology Induction Diameter of circular cooking zones (Ø)