Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instruction
protection
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
‰
Read instructions thoroughly to ensure the safe and effective use. Important! Read instructions in conjunction with vehicle or
9
equipment manufacturer's workshop manual.
Maintain the apparatus in good condition. Before each use check condition of each component. If any component is damaged, replace
9
immediately. Use genuine parts only. Unauthorised parts may not function correctly.
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT use the reamer, tap or insertion tool when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT use the repair kit for any purpose other than that for which it is designed.
8
When not in use return parts to the case, and store it in a safe, dry, childproof location.
9
2. INTRODUCTION
Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool,
reamer, two taps and five inserts in storage case.
3. SPECIFICATION
Model no. .......................................................... VS5281
Insert thread size ......................................M18 x 1.5mm
Replacements inserts (pack of 5) ....................VS5281R
Tap sizes ..............M18 x 1.5 x50mm, M20 x 1.5 x50mm
4. CONTENTS
Insertion tool
Threaded inserts.
© Jack Sealey Limited
OXYGEN SENSOR THREAD REPAIR KIT
MODEL NO:
Wear protective
clothing
Ø18.60 reamer
M18x1.5 tap
M20x1.5 tap
Original Language Version
VS5281.V2
VS5281.V2 Issue:1 13/02/23
Advertisement
Related Manuals for Sealey VS5281.V2
Summary of Contents for Sealey VS5281.V2
- Page 1 VS5281.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 6.1. Keep the tool in a clean, serviceable condition, using a lightly oiled cloth to clean it. Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.