Symptoms | Points to be checked |
Time | Time indication increases or does not change | - Time indication is approximate. Remaining time is corrected during operation and displayed.
|
Operation time is longer than the time indication. Operation does not stop even after the preset time. | - The operation time may be longer if laundry is concentrated on one side or the water supply or drainage is not good.
|
Main unit | No operation | - Power failure?
- Is the lid closed completely?
- Has the power fuse blown or the breaker tripped?
- Is the power plug inserted completely?
- Is the water faucet turned on?
- Did you press "Start"?
- Is the timer preset?
|
Wash | No water supply | - Is the water faucet turned on?
- Water outage?
- Is the water supply filter clogged with dirt?
|
Water is supplied in the middle of wash process. | - If the water level drops, water is added automatically.
- With a large amount of laundry, water is added several times automatically.
|
The water level is too high for the amount of laundry. | - If laundry is wet or there is water in the tub before operation, the water level may be higher.
|
The water level is too low for the amount of laundry. | - With light clothes (of synthetic fibre, etc.), the water level may be lower.
|
Rinse/Spin | Operation started with rinse, but water is not supplied. | - If there is no water in the tub, water is supplied after spin.
- If there is water in the tub, water is supplied after water discharge.
|
Operation suddenly changes to rinse process in the middle of spin. Only spin is desired, but operation starts with rinse. | - If clothes are concentrated on one side of the tub, the washing machine automatically corrects unevenness by starting rinse process. (Place clothes as evenly as possible.)
|
Irregular rotation during spin | - The tub rotation speed is adjusted to reduce foaming during spin.
|
Others | Power failure/The breaker has tripped. | - Operation will resume from the point where it was stopped when the power is recovered (Auto Restart).
|
Water outage | - When water supply is recovered, remove the water supply hose, release turbid water from the faucet, and then start the washing machine.
|
Cannot select the 4 Fragrance program. | - If Child Lock is set, the 4 Fragrance program cannot be selected.
|
Operation stops in the middle of wash or rinse process. | - Is the lamp flashing?
→ The pulsator occasionally stops to soak clothes while the lamp keeps flashing. This is not abnormal. |
Need Assistance?
Do you have a question about the NA-F70S7 that isn't answered in the manual? Leave your question here.