Advertisement
Quick Links
Tech Specs
Width: 2HP
Depth: 45mm
Power Consumption:
+12V=24mA, -12V=7mA, +5V=0mA
Range Toggle
Selects the length range of the
Fast (toggle down): 0.54ms to 20s
Slow (toggle up): 5ms to 2min
Outputs a copy of Input 1's signal.
Range: 0V to +10V
Decay Knob
Controls the decay stage length.
Release Knob
Controls the release stage length.
Short/Immediate Stop: fully left
Long/Long Tail: fully right
2hp ADSR
4-stage envelope generator
envelope.
Output
Short=fully left
Long=fully right
Discover more at
Gate/ADSR Relation
Gate Input
Triggers the envelope event. The
Sustain stage is held while the gate
signal is HIGH. Increase the gate
length for longer sustains!
Threshold: 2.5V
Out LED
Indicates the envelope's amplitude.
Attack Knob
Controls the attack stage length.
Short/Sharp: fully left
Long/Swell: fully right
Sustain Knob
Controls the sustain stage length.
Sustain stage is only active when the
gate input is HIGH.
Short: fully left
Long: fully right
twohp.com/modules/adsr
A D S
R
High
Low
Low
Advertisement
Related Manuals for 2hp ADSR
Summary of Contents for 2hp ADSR
- Page 1 2hp ADSR 4-stage envelope generator Tech Specs Gate/ADSR Relation Width: 2HP A D S Depth: 45mm Power Consumption: +12V=24mA, -12V=7mA, +5V=0mA High Range Toggle Gate Input Selects the length range of the Triggers the envelope event. The envelope. Sustain stage is held while the gate signal is HIGH.
- Page 2 PCB, just above the power header. You may notice that even though there is only 1 row of 5 pins on your 2hp module, but 2 rows on the power cable. You can use either row of 5 pin connectors on the cable with your module, so long as the red stripe is properly aligned.