Setung tne Kr UNIT
Additional information
When connecting the VCR to the TV using only the antenna, you must
General
setup
set the RF UNIT switch on the rear of the VCR so that the TV can
inf
ti
receive the correct signal from the VCR.
inrormation
If you connect the VCR to the TV using the supplied audio/video cable,
you can skip this step.
1 Set the RF UNIT switch on the rear of the VCR to CH3 or CH4,
whichever channel is not used in your area. If both are used, set the
switch to either channel.
2 Press POWER to turn on the VCR.
3 Press TV/VTR to turn on the VTR indicator in the VCR's display
window.
4 Press CHANNEL +/- to display a channel number in the display
window. Select an active channel number in your area.
POWER
CHANNEL
TV/VTR
2
'
5 Turn on your TV and set it to the channel you selected in step 1
(channel 3 or 4).
The selected TV channel broadcast appears on the TV screen. If the
channels change when you press CHANNEL +/~, you have made the
correct setting.
Whenever you use the VCR, set the TV to the channel selected in step
1.
Attaching the external antenna connector
ane oe twin
When using a 300-ohm twin lead cable for VHF/UHF antenna, use the
eed abe
EAC-32 antenna connector (not supplied) to connect the antenna to the
VCR.
41 Loosen the screws on the antenna connector.
2 Wind the twin leads around the screws on the antenna connector.
EAC-32 antenna connector
(not supplied)
3 Retighten the screws.
300-ohm twin
Attaching an UHF/VHF band mixer
ane
When using both 75-ohm coaxial cable and 300-ohm twin lead cable for
VHF/UHF antenna, use the EAC-66 UHF/VHF band separator/ mixer
EAC-66
(not supplied) to connect the antenna to the VCR.
UHE/VHF band
;
separator/mixer
1 Loosen the screws on the mixer.
(not supplied)
2 Wind the twin leads around the screws on the mixer.
g
3 Retighten the screws.
75-ohm coaxial cable
4 Connect the 75-ohm coaxial cable to the mixer.
Additional Information
72
ied a e e e
asa
lene
eT
a etre
ech
Te SUE
EE Loe
band Ee gt
e e e
Gee A
a
SESE
EOI
TEL
oe
eee
rere
oe
SEEN SELE S S SRE
ARIE TLIO WU
OP ie ee
tie
oe