hit counter code
Philips 150T4FS User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 150T4FS
  6. User manual
Philips 150T4FS User Manual

Philips 150T4FS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/MANUAL.HTM [3/2/2004 3:43:45 PM]

Advertisement

Table of Contents
loading

Related Manuals for Philips 150T4FS

Summary of Contents for Philips 150T4FS

  • Page 1 Manual file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/MANUAL.HTM [3/2/2004 3:43:45 PM]...

  • Page 2: Safety And Troubleshooting Information

    Safety and Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

  • Page 3: Installation Locations

    Safety and Troubleshooting Installation Locations Avoid exposure to heat and extreme cold Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold. Avoid moving the product between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges.

  • Page 4: About This Manual

    • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: Safety and Troubleshooting Information other related information you may need.
  • Page 5 ©2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, use, modification, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/about/about.htm (2 of 2) [3/2/2004 3:43:50 PM]...

  • Page 6: Product Information

    Physical Specification RETURN TO TOP OF THE PAGE TFT LCD 15 inch 0.297 x 0.297mm 1024 x 768 pixels R.G.B. vertical stripe Anti-glare polarizer (H) 304.1 x (V) 228.1mm 8 bits interface (16.7M colors) • Philips Pixel • Pin Assignment •...

  • Page 7: Optical Characteristics

    Product Information PC SCANNING • Vertical refresh rate • Horizontal frequency PC VIDEO • Video dot rate • Input impedance - Video - Sync • Input signal levels • Sync input signal • Sync polarities • Input Frequency • Video interface AUDIO •...

  • Page 8: Resolution & Preset Modes

    Product Information • Peak contrast angle • White Chromaticity • Viewing Angle (C/R >5) • Response time * This data is subject to change without notice. Resolution & Preset Modes • Maximum • Recommended 14 user definable modes 11 factory preset modes: file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (3 of 8) [3/2/2004 3:43:52 PM] 6 o'clock x: 0.283 y: 0.297 (at 9300°...

  • Page 9: Progressive Video

    Product Information Resolution 640*350 640*480 640*480 640*480 720*400 800*600 SVGA VESA 56 800*600 SVGA VESA 60 800*600 SVGA VESA 75 832*624 1024*768 1024*768 Video Video Video Progressive Video Pr. Component file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (4 of 8) [3/2/2004 3:43:52 PM] Mode H. freq (kHz) VGA-1 31.469 VGA VESA 60...

  • Page 10: Energy Star

    4.1 kg - 5° / 20° 100 — 240 VAC, 50/60 Hz 25 W (typ.) 5° C to 40° C 20% to 80% Power Used LED color Blue 25W (typ.) 110VAC < 1W Amber 230VAC < 2W ® PHILIPS artner,...
  • Page 11 Product Information • System MTBF * This data is subject to change without notice. Pin Assignment The 15-pin D-sub connector (male) of the signal cable: Assignment Red video input Green video input Blue video input Ground Ground Red video ground Green video ground Blue video ground file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (6 of 8) [3/2/2004 3:43:52 PM]...

  • Page 12: Product Views

    Product Information Product Views Follow the links to see various views of the monitor and its components. Front View Product Description Physical Function Tilt file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (7 of 8) [3/2/2004 3:43:52 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 13 Product Information RETURN TO TOP OF THE PAGE file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/product.htm (8 of 8) [3/2/2004 3:43:52 PM]...

  • Page 14: Installing Your Lcd Monitor/Tv

    Installing your LCD Monitor/TV Installing your LCD Monitor/TV Front View Product Description and Easy Wall Mounting • Installing the Optional TV/AV Module Performance Front View Product Description SOURCE TV/Video source selection file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/install.htm (1 of 3) [3/2/2004 3:43:54 PM] • Connecting to Your PC, TV antenna, DVD/VCR etc. •...
  • Page 15 Installing your LCD Monitor/TV Increase or decrease the channel number up or down the highlighted function in OSD MENU Open the OSD and select the highlighted function Increase or decrease the level of audio volume move up or down the highlighted function in OSD Power indicator Power switch On/Off Receiver for 'remote control'...
  • Page 16 Installing your LCD Monitor/TV DC 12V out AC in PC - Audio in Audio out Optimizing Performance For best performance, ensure that your display settings are set at 1024x768@60Hz (for 15"). Note: You can check the current display settings by pressing the 'MENU' button once.

  • Page 17: Description Of The On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature offered by all Philips LCD monitors/TVs. It allows an end user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.

  • Page 18: Input Select

    On-Screen Display Europe OSD Guide PC Mode INPUT SELECT S-VIDEO HD-YPbPr LANGUAGE ENGLISH DEUTSCH ITALIANO ADJUST POSITION HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST BRIGHTNESS CONTRAST file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (2 of 13) [3/2/2004 3:43:57 PM] Select video source for main display: PC VGA input Antenna or cable TV input CVBS Composite Video input S-video input...

  • Page 19: Video Noise

    On-Screen Display VIDEO NOISE PHASE CLOCK ADJUST COLOR ORIGINAL PANEL COLOR 9300K FOR CAD/CAM 6500K FOR IMAGE MANAGEMENT SRGB USER PRESET RESET TO FACTORY SETTINGS AUTO EXIT TV/Video/HD Mode INPUT SELECT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (3 of 13) [3/2/2004 3:43:57 PM] Adjust phase and clock to obtain stable and clear display Set color temperature to suit personal preference GREEN BLUE...
  • Page 20 On-Screen Display S-VIDEO HD-YPbPr PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS COLOR TEMP EXIT SOUND TREBLE BASS BALANCE SURROUND (ON/OFF) EXIT LANGUAGE ENGLISH DEUTSCH file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (4 of 13) [3/2/2004 3:43:57 PM] Antenna or cable TV input CVBS Composite Video input S-video input Progressive video input &...

  • Page 21: Video Mode

    On-Screen Display ITALIANO INSTALL SYSTEM AUTO STORE MANUAL STORE CHANNEL SKIP CHANNEL SWAP EXIT VIDEO MODE REGULAR WIDE EXIT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (5 of 13) [3/2/2004 3:43:57 PM] Install a TV program list Specify the TV system at the user location: WEST EUR FRANCE Scan and store the TV programs at the user location automatically...
  • Page 22 On-Screen Display Asia Pacific and China OSD Guide (excluding Korean, Taiwan and Philippines) PC Mode INPUT SELECT S-VIDEO HD-YPbPr LANGUAGE ENGLISH ADJUST POSITION HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST BRIGHTNESS CONTRAST VIDEO NOISE PHASE CLOCK file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (6 of 13) [3/2/2004 3:43:57 PM] Select video source for main display: PC VGA input Antenna or cable TV input...
  • Page 23 On-Screen Display ADJUST COLOR ORIGINAL PANEL COLOR 9300K FOR CAD/CAM 6500K FOR IMAGE MANAGEMENT sRGB USER PRESET RESET TO FACTORY SETTINGS AUTO EXIT TV/Video/HD Mode INPUT SELECT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (7 of 13) [3/2/2004 3:43:57 PM] Set color temperature to suit personal preference GREEN BLUE Reset the setting to default values...
  • Page 24 On-Screen Display S-VIDEO HD-YPbPr PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TINT COLOR TEMP EXIT SOUND TREBLE BASS BALANCE SURROUND (ON/OFF) EXIT LANGUAGE ENGLISH INSTALL AUTO STORE file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (8 of 13) [3/2/2004 3:43:57 PM] S-video input Progressive video input & YPbPr component video input Adjust picture characteristics to suit personal preference Normal...
  • Page 25 On-Screen Display MANUAL STORE CHANNEL SKIP CHANNEL SWAP EXIT VIDEO MODE REGULAR WIDE EXIT Americas OSD Guide (including Korean, Taiwan and Philippines) PC Mode INPUT SELECT S-VIDEO file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (9 of 13) [3/2/2004 3:43:57 PM] Fine tune and store the TV programs at the user location manually Set the skipped programme when accessing programmes using the...
  • Page 26 On-Screen Display HD-YPbPr LANGUAGE ENGLISH ADJUST POSITION HORIZONTAL VERTICAL BRIGHTNESS & CONTRAST BRIGHTNESS CONTRAST VIDEO NOISE PHASE CLOCK ADJUST COLOR ORIGINAL PANEL COLOR 9300K FOR CAD/CAM 6500K FOR IMAGE MANAGEMENT sRGB USER PRESET RESET file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (10 of 13) [3/2/2004 3:43:57 PM] Progressive video input &...
  • Page 27 On-Screen Display AUTO EXIT TV/Video/HD Mode INPUT SELECT S-VIDEO HD-YPbPr PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TINT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (11 of 13) [3/2/2004 3:43:57 PM] Automatic adjustment of the display parameters to give optimum display Exit from this menu RETURN TO TOP OF THE PAGE Select video source for main display: PC VGA input Antenna or cable TV input...
  • Page 28 On-Screen Display COLOR TEMP EXIT SOUND TREBLE BASS BALANCE SURROUND (ON/OFF) EXIT LANGUAGE ENGLISH INSTALL TUNER MODE AUTO STORE FINETUNE CHANNEL EDIT EXIT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (12 of 13) [3/2/2004 3:43:57 PM] Normal Cool Warm Adjust audio characteristics to suit personal preference Set language for OSD Install a TV program list Set the tuner mode:...
  • Page 29 On-Screen Display VIDEO MODE REGULAR WIDE EXIT file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/osddesc.htm (13 of 13) [3/2/2004 3:43:57 PM] When viewing regular 4:3 format video signal When viewing wide (16:9) format video signal, e.g. HD Exit from this menu RETURN TO TOP OF THE PAGE...
  • Page 30 TV Control TV Control Using Your Remote Control Using Other Menu: Europe area Asia Pacific area and China excluding Korea, Taiwan and Philippines Americas, Korea, Taiwan and Philippines Using Your Remote Control For European countries For countries outside Europe For European countries Remote Control Diagram file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (1 of 6) [3/2/2004 3:44:00 PM]...
  • Page 31 TV Control Standby Numerical keys file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (2 of 6) [3/2/2004 3:44:00 PM] To set the TV temporarily to standby mode. To switch on the TV set, press Programme button (CH -, +), any digit between 0 and 9 or AV source button (The amber light indicates when set is in standby mode) For direct access to programmes For a 2-digit programme number, the 2nd digit...
  • Page 32 TV Control Menu Volume Previous programme SOURCE Mute Audio Mode Selecting TV programmes Sleep timer file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (3 of 6) [3/2/2004 3:44:00 PM] To turn on or off the OSD (On-Screen Display) To return to last item in OSD & clear menu from screen To adjust the sound level.
  • Page 33 TV Control Screen mode For countries outside Europe Remote Control Diagram file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (4 of 6) [3/2/2004 3:44:00 PM] To switch between 4:3 and 16:9 video format for optimum viewing ratio. RETURN TO TOP OF THE PAGE...
  • Page 34 TV Control Standby Numerical keys Menu Volume Previous programme SOURCE Mute Audio Mode file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (5 of 6) [3/2/2004 3:44:00 PM] To set the TV temporarily to standby mode. To switch on the TV set, press Standby button, Programme button (CH -, +), any digit between 0 and 9 or AV source button.
  • Page 35 TV Control Selecting TV programmes Sleep timer Screen mode file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (6 of 6) [3/2/2004 3:44:00 PM] To move up or down a programme. To move the cursor up/down to scroll through a list of options. In PC/Video 'Standby' mode, press CH+/- to return to 'on' in TV mode.

  • Page 36: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...

  • Page 37: Download And Print

    Download and Print Download and Print Installing your LCD monitor driver Program Installing Your LCD monitor driver System requirements: PC running Windows® 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Driver_install02.txt"...
  • Page 38 Download and Print 2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source').
  • Page 39 Download and Print 'source', choose 'source'). Exit your browser and install the FPadjust Program. Read the "FP_Readme03.txt" file before installing. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/download/download.htm (3 of 3) [3/2/2004 3:44:03 PM] RETURN TO TOP OF THE PAGE...

  • Page 40: Faqs (Frequently Asked Questions)

    Restart your computer and repeat steps 2 and 3 to verify that your PC is set at 1024x768@60Hz (15"). Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC.
  • Page 41 FAQs (Frequently Asked Questions) ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. How do I adjust the resolution? Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® 95/98 Me & 2000/XP with the 'Display properties/Settings' control panel.

  • Page 42: Screen Adjustments

    Yes. Philips LCD monitors have this optional feature. The standard VESA mount holes on the back cover allows the user to mount the Philips monitor on any VESA standard ARM or accessories. Touch panels are being developed for future applications. Check with your Philips sales representative for more information.

  • Page 43: Compatibility With Other Peripherals

    Can I connect my LCD monitor to any PC, workstation or Mac? Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your dealer/retailer for more information.

  • Page 44: Lcd Panel Technology

    FAQs (Frequently Asked Questions) luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides a better picture quality than is achieved with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal. LCD Panel Technology What is a Liquid Crystal Display? A Liquid Crystal Display (LCD) is an optical device that is commonly used to display ASCII...
  • Page 45 FAQs (Frequently Asked Questions) What differentiates passive matrix LCDs from active matrix LCDs? An LCD is made with either a passive matrix or an active matrix display grid. An active matrix has a transistor located at each pixel intersection, requiring less current to control the luminance of a pixel.
  • Page 46 FAQs (Frequently Asked Questions) has 1024x3 (R, G, B) x 768 pixels and a higher resolution may not be available without additional software processing. The panel is designed to optimise the display for a 65MHz dot clock, one of the standards for XGA displays.

  • Page 47: Ergonomics, Ecology And Safety Standards

    Standards. Does the product conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. The specification page provides detailed data on safety standards.

  • Page 48: Troubleshooting

    Audio Problems • Regulatory Information This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these solutions, contact your nearest Philips dealer. Common Problems Having this problem? No Picture...
  • Page 49 Troubleshooting Image vibrates on the screen Vertical flicker appears Horizontal flicker appears The screen is too bright or too dark An after-image appears An afterimage remains after the power has been turned off. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/saf_troub.htm (2 of 4) [3/2/2004 3:44:10 PM] Check that the signal cable is properly connected to the graphics board or PC.
  • Page 50 If on certain TV channels you receive a picture but no sound, this means that you do not have the correct TV system. Modify the SYSTEM setting. Consumer Information Centres RETURN TO TOP OF THE PAGE list and contact your local Philips...
  • Page 51 Troubleshooting file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/saf_troub.htm (4 of 4) [3/2/2004 3:44:10 PM]...

  • Page 52: Regulatory Information

    (1 of 13) [3/2/2004 3:44:12 PM] • EN 55022 Compliance (Czech Republic Only) • MIC Notice (South Korea Only) • Philips End-of-Life Disposal • Troubleshooting • Other Related Information You have just purchased a TCO '99 approved and •...
  • Page 53 Regulatory Information Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things.
  • Page 54 ** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:2000 (Safety requirement of Information Technology Equipment) file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (3 of 13) [3/2/2004 3:44:12 PM]...
  • Page 55 VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software. NUTEK VESA State Normal operation file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (4 of 13) [3/2/2004 3:44:12 PM] RETURN TO TOP OF THE PAGE PHILIPS 150T4 LED Indicator Power Consumption Blue 25 W (typical)
  • Page 56 THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (5 of 13) [3/2/2004 3:44:12 PM] Amber ® PHILIPS artner, has determined that this product meets ® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE 110VAC <...
  • Page 57 Regulatory Information Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
  • Page 58 Regulatory Information VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference.
  • Page 59 Regulatory Information Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 60 Regulatory Information North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (9 of 13) [3/2/2004 3:44:12 PM] RETURN TO TOP OF THE PAGE...
  • Page 61 Regulatory Information Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å...
  • Page 62 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.

  • Page 63: Warning! This Appliance Must Be Earthed

    Regulatory Information file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (12 of 13) [3/2/2004 3:44:12 PM] WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2.
  • Page 64 Regulatory Information file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/regs/regulat.htm (13 of 13) [3/2/2004 3:44:12 PM] connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N"...

  • Page 65: Other Related Information

    Other Related Information Other Related Information Safety and Troubleshooting for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.

  • Page 66: Philips' Lcd Panel Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
  • Page 67 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/pixel.htm (2 of 4) [3/2/2004 3:44:20 PM]...
  • Page 68 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
  • Page 69 Philips Pixel Defect Policy Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/product/pixel.htm (4 of 4) [3/2/2004 3:44:20 PM] RETURN TO TOP OF THE PAGE...

  • Page 70: Connecting To Your Pc, Tv Antenna, Dvd/Vcr Etc

    Connecting to Your PC, TV Antenna, DVD/VCR etc. Connecting to Your PC, TV Antenna, DVD/VCR etc. Front View Product Description DVD/VCR etc. • VESA Mounting and Easy Wall Mounting • Getting Started • Optimizing Performance Using the Cable Management Accessory Pack Unpack all the parts.
  • Page 71 Connecting to Your PC, TV Antenna, DVD/VCR etc. Mini jack to RCA audio-in cable Audio Chin cable D-SUB to YPbPr adapter cable E-DFU pack TV/AV module Security screw for TV module file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/connect.htm (2 of 10) [3/2/2004 3:44:25 PM]...
  • Page 72 Connecting to Your PC, TV Antenna, DVD/VCR etc. Tuner adapter Setting up and connecting your monitor/TV Ensure that the power to the monitor/TV is switched off before the installation. A) Connecting to PC computer file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/connect.htm (3 of 10) [3/2/2004 3:44:25 PM] RETURN TO TOP OF THE PAGE Wall mount kit...
  • Page 73 Connecting to Your PC, TV Antenna, DVD/VCR etc. 1. Make sure the external speaker power cable is plugged into the DC 12V OUT connector on the back of the monitor. 2. Connect the power cord to the AC IN power connector on the back of the monitor.
  • Page 74 Connecting to Your PC, TV Antenna, DVD/VCR etc. 1. Connect RCA (Yellow) or S-VHS cable to an appropriate external AV device such as DVD/VCR. 2. Connect RCA audio cable to AUDIO (R) and AUDIO (L) terminal and the other ends to corresponding audio out terminals on the AV device. 3.
  • Page 75 Connecting to Your PC, TV Antenna, DVD/VCR etc. 1. Using the supplied YPbPr to VGA adapter cable, connect the YPbPr end to the COMPONENT VIDEO OUT terminal of progressive DVD/Setup Box, and connect the other end to the VGA connector on the back of the monitor. 2.
  • Page 76 Connecting to Your PC, TV Antenna, DVD/VCR etc. 1. Connect an antenna or CATV cable to the antenna port of tuner box. RETURN TO TOP OF THE PAGE Using the Cable Management file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/connect.htm (7 of 10) [3/2/2004 3:44:25 PM]...
  • Page 77 Connecting to Your PC, TV Antenna, DVD/VCR etc. Remove the arm box's top cover. Press the center of the cap and open the cap from sides (Do not attempt to open the cap from the top or the bottom) Place the cables inside the arm box. Replace top cover.
  • Page 78 Connecting to Your PC, TV Antenna, DVD/VCR etc. To remove back cover file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/connect.htm (9 of 10) [3/2/2004 3:44:25 PM] Line up in ventilation. Before attempting to seal the cover, make sure it is properly aligned with the upper hooks. Use hands to push and seal in place.
  • Page 79 Connecting to Your PC, TV Antenna, DVD/VCR etc. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/connect.htm (10 of 10) [3/2/2004 3:44:25 PM] Lift off the rear cover from the top hooks at an angle of less than 30 degrees to avoid hook damage. RETURN TO TOP OF THE PAGE...
  • Page 80 VESA Mounting and Easy Wall Mounting VESA Mounting and Easy Wall Mounting Front View Product Description DVD/VCR etc. • Installing the Optional TV/AV Module Performance Unfold the base • Fold the base Wall Mounting Unfold and Fold the Base Unfold the Base file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/base.htm (1 of 6) [3/2/2004 3:44:26 PM] •...
  • Page 81 VESA Mounting and Easy Wall Mounting Fold the Base Foldable base available for easy wall mounting Make sure the back cover is removed before mounting the monitor on the wall. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/base.htm (2 of 6) [3/2/2004 3:44:26 PM] Push down the head of monitor. Make sure the back cover is removed when folding the base.
  • Page 82 VESA Mounting and Easy Wall Mounting Smart tips 1. Use the full scale template to mark on the wall the horizontal distance (130 mm) between the two mounting screws. Notes: - The surface for mounting area must be flat and larger than the pedestal. - The wall must support a pull force of 10 kg for each screw.
  • Page 83 VESA Mounting and Easy Wall Mounting WARNING! Read all instructions carefully before mounting! Correct assembly is essential. The maximum allowed weight of the LCD Display is 6.5 kg/14.3 lbs. The assembly materials that come with the product are only suitable for attachment to solid wood, brick or concrete walls.
  • Page 84 VESA Mounting and Easy Wall Mounting B) Attaching a wall or arm mounting device. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/base.htm (5 of 6) [3/2/2004 3:44:26 PM] Remove the hinge cape Remove the 4 screws and then remove the base from the LCD monitor.
  • Page 85 VESA Mounting and Easy Wall Mounting Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. The monitor support VESA mounting standard for use with various VESA mounting devices. To install any VESA mounting devices, please follow the instructions given. file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/base.htm (6 of 6) [3/2/2004 3:44:26 PM] RETURN TO TOP OF THE PAGE...
  • Page 86 Installing the Optional TV/AV Module Installing the Optional TV/AV Module Front View Product Description VESA Mounting and Easy Wall Mounting Optional TV/AV Module: Detach the TV dummy cover file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/module.htm (1 of 3) [3/2/2004 3:44:26 PM] • Connecting to Your PC, TV Antenna, DVD/VCR etc. •...
  • Page 87 Installing the Optional TV/AV Module Install the TV module file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/module.htm (2 of 3) [3/2/2004 3:44:26 PM] Press and hold the TV module release button. Slide the TV module towards the center of the monitor until it locks into the monitor.
  • Page 88 Installing the Optional TV/AV Module file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/install/module.htm (3 of 3) [3/2/2004 3:44:26 PM] RETURN TO TOP OF THE PAGE Please secure the TV module using the security screw provided.

  • Page 89: Getting Started

    The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/XP and the Plug & Play application can be activated.
  • Page 90 Getting Started For Windows® Me Start Windows® Me Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select the 'Monitor' button, then click on 'Change...' button. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
  • Page 91 Getting Started Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive).
  • Page 92 Using other menus (Europe area) Using Other Menus (Europe Area) Using the Remote Control Selecting a source input Adjusting the picture preference Adjusting the sound preference Selecting a preferred OSD language Screen modes Automatic tuning • Manual tuning Using the Remote Control 1.
  • Page 93 Using other menus (Europe area) S-video HD-YPbPr 4. Press to select the input source. Adjusting the picture preference 1. Press to activate the menu. 2. Use to scroll the highlight PICTURE, and then press to highlight the picture parameter to be adjusted. There are 5 parameters: BRIGHTNESS: adjusts screen brightness.
  • Page 94 Using other menus (Europe area) SURROUND ON/OFF: to turn the surrounding sound effect on or off. 4. Press to adjust the selected parameter. 5. Use , to highlight EXIT and then press Selecting a preferred OSD language 1. Press to activate the menu. 2.
  • Page 95 Using other menus (Europe area) 4. Press to select the mode. 5. Use to highlight EXIT and then press Automatic tuning This menu allows you to automatically search for all the programmes available in your region (or on your cable network). 1.
  • Page 96 Using other menus (Europe area) 4. Use to scroll the highlight SEARCH and press As soon as a programme is found, the search will stop. If you know the frequency of the programme required, enter its number directly using the 0-9 keys and go to step 6. 5.
  • Page 97 Using other menus (AP) Using Other Menus (Asia Pacific Area and China excluding Korea, Taiwan, and Philippines) Using the Remote Control Selecting a source input Adjusting the picture preference Adjusting the sound preference Selecting a preferred OSD language Video mode Automatic tuning •...
  • Page 98 Using other menus (AP) S-video HD-YPbPr 4. Press to select the input source. Adjusting the picture preference 1. Press to activate the menu. 2. Use to scroll the highlight PICTURE, and then press to highlight the picture parameter to be adjusted. There are 6 parameters: BRIGHTNESS: alters the brightness of the image.
  • Page 99 Using other menus (AP) BALANCE: to balance the sound between the left and right speakers. SURROUND ON/OFF: to turn the surrounding sound effect on or off. 4. Press to adjust the selected parameter. 5. Use , to highlight EXIT and then press Selecting a preferred OSD language 1.
  • Page 100 Using other menus (AP) 5. Use to highlight EXIT and then press Automatic tuning This menu allows you to automatically search for all the programmes available in your region (or on your cable network). 1. Press to activate the menu. 2.

  • Page 101: Skipping Programmes

    Using other menus (AP) 8. Repeat steps 4 to 7 for each programme to be stored. Skipping programmes This menu allows you to set the skipped programmes when you use p +/- keys to access the programme. 1. Press to activate the menu. 2.
  • Page 102 Using other menus (NA) Using Other Menus (Americas, Korea, Taiwan and Philippines) Using the Remote Control Selecting a source input Adjusting the picture preference Adjusting the sound preference Selecting a preferred OSD language Video mode Install: Automatic tuning Using the Remote Control 1.
  • Page 103 Using other menus (NA) S-Video HD-YPbPr 4. Press to select the input source. Adjusting the picture preference 1. Press to activate the menu. 2. Use to scroll the highlight PICTURE, and then press to highlight the picture parameter to be adjusted. There are 6 parameters: BRIGHTNESS: alters the brightness of the image.
  • Page 104 Using other menus (NA) BALANCE: to balance the sound between the left and right speakers. SURROUND ON/OFF: to turn the surrounding sound effect on or off. 4. Press to adjust the selected parameter. 5. Use , to highlight EXIT and then press Selecting a preferred OSD language 1.
  • Page 105 Using other menus (NA) 4. Press to select the mode. 5. Use to highlight EXIT and then press Automatic tuning This menu allows you to automatically search for all the programmes available in your region (or on your cable network). 1.
  • Page 106 Using other menus (NA) Skipping programmes (Channel edit) This menu allows you to set the skipped programmes when you use p +/- keys to access the programme. 1. Press to activate the menu. 2. Use to scroll the highlight INSTALL, and then press 3.

  • Page 107: Your Philips F1Rst Choice Warranty

    What is excluded? The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product.
  • Page 108 Note that products that are not originally designed, manufactured, approved and/or authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.

  • Page 109: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.
  • Page 110 Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 111 Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 112 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 113 Philips Warranty Helpdesk Philips Warranty Helpdesk Telephone numbers: 01 546 575 603 Austria 02 275 0701 Belgium 800 92256 Cyprus (Greek) 35 25 87 61 Denmark 03 8717 0033 France 0696 698 4712 Germany 00800 3122 1223 Greece 09 2290 1908...

  • Page 114: Consumer Information Centers

    Phone: (02)-6831581 Fax : (02)-66310852 HUNGARY Philips Markaszerviz. Kinizsi U 30-36Budapest 1092 Phone: (01)-2164428 Fax : (01)-2187885 POLAND Philips Polska CE UL.Marszalkowska 45/49 00-648 Warszawa Phone: (02)-6286070 Fax : (02)-6288228 file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/warranty/warcic.htm (1 of 9) [3/2/2004 3:45:17 PM] Bangladesh • Brasil •...
  • Page 115 ARGENTINA Philips Antillana N.V. Vedia 3892 Capital Federal CP: 1430 Buenos Aires Phone: (011)-4544 2047 BRASIL Philips da Amazônia Ind. Elet. Ltda. Av. Luis Carlos Berrini, 1400 - Sao Paulo -SP Phone: 0800-701-0203 file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/warranty/warcic.htm (2 of 9) [3/2/2004 3:45:17 PM]...
  • Page 116 Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone:(01)-8000 111001 (toll free) Fax : (01)-619-4300/619-4104...
  • Page 117 Consumer Information Centers URUGUAY Ind.Philips del Uruguay S.A. Luis Alberto de Herrera 1248 Customer Help Desk 11300 Montevideo Phone: (02)-6281111 Fax : (02)-6287777 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420...
  • Page 118 Consumer Information Centers NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (toll free) Fax : 0800 288 588 (toll free) Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam...
  • Page 119 Consumer Information Centers 200001 Shanghai Phone: 800 820 5128 (toll free) Fax: 21-656 10647 HONG KONG Philips Hong Kong Limited Consumer Information Centre 16/F Hopewell Centre 17 Kennedy Road, WANCHAI Phone: 2619 9663 Fax : 2481 5847 INDIA Phone: 91-20-712 2048 ext: 2765...
  • Page 120 Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-794 0040 / 798 4255 ext: 1612 Fax : (021)-794 7511 / 794 7539 KOREA Philips Korea Ltd. Philips House C.P.O.
  • Page 121 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-888 05 72 Domestic toll free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax : (02)-888 05 71 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340...
  • Page 122 Martindale., Johannesburg P.O.box 58088 Newville 2114 Phone: +27 11 471 5000 Fax : +27 11 471 5020 Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-335 3666 Fax : (04)-335 3999 EGYPT Philips Egypt...

This manual is also suitable for:

150t4150t4fs/97150t4fs/89

Table of Contents