External Disc Unit Instruction manual About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. Über diese Anleitung Lesen Sie bitte diese Bedienungsanleitung vor der Installation und der Verwendung des Gerätes sorgfältig durch.
Page 2
However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre. CAUTION! Danger of explosion if battery is incorrectly replaced.
Fitting (x1) Screw (x3) Power cord tie (x3) Instruction Manual Copyright This manual and software are copyrighted by Sanyo Electric Co., Ltd. Brand and product names used in this manual are the trademarks or registered trademarks of their respective companies.
Always perform test recording, and use a computer to confirm whether playback is normal. Note that Sanyo accepts no responsibility for losses occurring as a result of recording or playback problems caused by malfunction of this unit or any connected devices.
BEFORE USE Cleaning the disk When there are fingerprints or dust on the recording (playback) side of the disk, it may not record properly. Also, image and/or sound quality of playback data may deteriorate. Before recording/playback, remove debris from the disk with a soft cloth by wiping the recording (playback) side outwards from the center.
NAMES AND FUNCTIONS OF PARTS Front panel POWER POWER indicator Lights up when the power is on. Microprocessor reset button Resets the microprocessor. Disk tray Inserts CD-R/RWs or DVD+R/+RWs. Rear panel USB terminal Socket for the USB cable (accessory) when connecting the external disc unit to the DVR.
INSTALLATION AND CONNECTION TO DVR Installation Call a specialist to install the unit. (Do not try to install the unit yourself.) Use the following procedures to attach the external disc unit to the DVR. Docking the unit with the DVR is useful. The external disc unit and the DVR must be off before commencing the following procedures.
INSTALLATION AND CONNECTION TO DVR Attaching the external disc unit to the DVR Place the DVR on the external disc unit. (1) Insert the three legs of the DVR into the corresponding holes in the top of the external disk unit. The fitting should be positioned on the outside of the right side of the DVR.
FORMATTING DISKS Formatting CD-RWs and DVD+RWs Use the following procedures to format CD-RWs and DVD+RWs. Operating the external disc unit Set the CD-RW or DVD+RW in the disk tray. Operating the DVR (DSR-5016P/5009P) When the still image on the full screen of the playback is displayed, press the [COPY] button.
Page 10
The USB terminal is for the use of the recommended Sanyo CD-R/RW drive (sold separately). Non- recommended peripherals cannot be connected. For recommended recordable drives, check the Sanyo homepage or ask at your local Sanyo dealer. Sanyo website URL: http://www.sanyosecurity.com English...
APPENDIX Specifications Product name External disc unit Product number VA-EXD1B/W Disk drive Slim type Recording format ISO9660 Supported media DVD+R/+RW (VA-EXD1B only) and CD-R/RW Terminals USB terminal (USB2.0, series B terminal) (x1) Power supply voltage 120 to 240V AC, 50/60 Hz Current consumption 1000 mA Allowable operating temperature...