Page 1
DIGITAL A/V SURROUND RECEIVER DIGITAL A/V SURROUND RECEIVER User Manual Manuel D’utilisation Manual del usuario HTR5000 HTR5000...
Page 2
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/usasupport...
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that...
Page 4
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD system is fully compatible with such new discs. Should you have difficulty playing such CD- Audio discs, kindly refer them to your CD-Audio disc retailer.
Page 5
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978, 762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending.
Page 6
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Contents General Information Supplied accessories ... 8 Care and safety information ... 8 Connections Step 1: Set up the speakers ... 9 Step 2: Placing the speakers and subwoofer .. 9 Step 3: Connecting speakers and subwoofer 10 Step 4: Connecting FM/AM antennas ... 11 Step 5: Connecting the power cord ...11 Optional Connections - Playback Connecting to TV/VCR/other audio...
Allow at least 10cm (4 inches) of free space all around the apparatus for adequate ventilation. 10 cm (4 inches) PHILIPS 10 cm 10 cm (4 inches) (4 inches) DVD Home Cinema System Finding a suitable location –...
45 degrees from the listening position. Place the center speaker above the TV or the AV receiver so that the center channel’s sound is localised. Place the rear speakers at normal listening ear level facing each other or mounted on the wall.
Step 3: Connecting speakers and subwoofer Front Right Front Left AC MAINS SPEAKERS 3 SPEAKERS 3 FRONT FRONT FRONT LEFT RIGHT CENTER Rear Right Connect the supplied speaker systems by matching the colours of the jacks and speaker cables. Fully insert the stripped portion of the speaker wire into the jacks.
Connections Step 4: Connecting FM/ antennas fix the claw into the slot SPEAKERS 3 LEFT FRONT CENTER REAR LEFT COAXIAL IN OPTICAL IN COAXIAL OUT RIGHT SUBWOOFER REAR RIGHT COAXIAL OUT 6 CHANNEL IN Connect the supplied AM loop antenna to the jack.
IMPORTANT! – You can connect other audio and audio/visual equipments to this AV receiver in order to use the Home Cinema Audio System’s surround sound capabilities. – For connection to additional components, the audio/video cables are not supplied. – When making connections, make sure the colour of cables matches the colour of jacks.
(e.g. Dolby Digital, DTS) and has 6-channel (multichannel) output jacks, you may use the audio cables (not supplied) to connect the AV receiver’s 6 CHANNEL IN jacks to the corresponding output jacks on the DVD/SACD player (see fig A). Before starting operation, Start playing back the connected source as usual.
(two-channel, left and right) recordings. Helpful Hints: – Dolby Digital, DTS or MPEG signal are not possible to record from this AV receiver. – Digital recording is not possible when the digital source material is copy-protected. FRONT LEFT FRONT CENTER...
– TUNER: toggles between FM and band. – AUX: selects AUX mode. PHONES – Plug in the headphones jack. The speakers output will be cancelled. VOLUME (VOL +-) – Adjusts the volume level. – Selects a setting in receiver setup menu. 8239 300 38592...
– Adjusts rear speakers’ sound level. CENTER +- – Adjusts center speaker’s sound level. TV VOL +- – Adjusts TV volume (Philips TV only). SLEEP – Sets the sleep timer function. – Selects different levels of brightness for display panel. MUTE –...
Step 2: Switching on/off After completing all the connections, connect the AC power cord of the AV receiver to the wall outlet. Switching to an active mode Press the SOURCE control to select : DISC 6CH ™ DISC COAX ™...
CENTER DELAY – Select this to set the delay time in relation to the listening position/distance from 5ms, 3ms, 2ms, 1ms or OFF (default setting). REAR DELAY – Select this to set the delay time in relation to the listening position/distance from rear speakers :...
Sound Controls IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 7). Selecting surround sound In DISC COAX or DISC OPTI mode, if the audio signal received is Dolby Digital or DTS, pressing SURROUND button will cyclically go through : DOLBY DIGITAL / DTS ™...
"VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level. For Philips TVs only Press TV VOL +/- on the remote control to adjust the TV’s volume level. To listen through the headphones...
Tuner Operations IMPORTANT! Make sure the FM and antennas are connected. Tuning to radio stations Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “ M”. Press and hold S / T on the remote until the frequency indication starts to change, then release.
Press PROG again to store. Repeat steps to store other radio stations. Helpful Hints: – If you attempt to program more than 40 preset radio stations, “PROG FULL” appears. – The system will exit presetting mode if no button is pressed within two seconds. Selecting a preset radio station Press...
Radio reception is poor. The remote control does not function properly. Low hum or buzz sound. NEED HELP? Visit our website www.philips.com/ Solution – Check if the AC power cord is properly connected. – Adjust the volume.
AMPLIFIER SECTION Total Output Power (Home Theater Mode) 700W Total Output Power ( 1% THD) 330W Front Center Surround Subwoofer Frequency Response 150 Hz – 20 kHz / –3 dB Signal-to-Noise Ratio > 60 dB (CCIR) Input Sensitivity - TV In 600 mV - AUX In 600 mV...
These jacks send audio through two channels, the left and right. AUDIO OUT Jacks: Jacks on the back of the AV receiver that send audio to another system (TV, Stereo, etc.). Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks.
Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained with- in the product, or any non-Philips product or part not covered by this warranty.