Before Using the Product Connecting and Using a Source Device Screen Setup Securing the Installation Space Read below before installing the monitor. SAMSUNG MAGIC Bright Precautions for storage Connecting and Using a PC Brightness Safety Precautions Connection Using the HDMI Cable...
Page 3
Table of contents Configuring the PIP/PBP Settings Setup and Reset Troubleshooting Guide PIP/PBP Mode FreeSync Requirements Before Contacting Samsung Customer Service Center Size Eco Saving Plus Testing the Product Checking the Resolution and Frequency Position Off Timer Plus Check the following.
(3.93 Inches) (3.93 Inches) ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen.
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result.
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •...
Page 8
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause • Insert the power plug into the AC/DC adapter until a click sound is heard. afterimage burn-in or defective pixels. • Do not insert only the power plug into the power outlet. ‒...
Page 9
• Do not hold the product upside-down or move it by holding the stand. ‒ The product may fall and become damaged or cause an injury. • Looking at the screen too close for an extended period of time can deteriorate your eyesight. •...
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―...
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. Eye Saver Mode Volume Features Eye Saver Mode Off •...
Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied.
Page 13
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
The function mutes the audio to improve sound effect when there is sound noise or when the input Brightness signal is weak, usually due to a problem with the volume of an input device. ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
Types of Ports ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product.
Adjusting the Product Tilt Anti-theft Lock ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― An anti-theft lock allows you to use the product securely even in public places. notice to improve quality.
Precautions for moving the monitor • Do not directly apply pressure on the screen. • Do not hold the product upside down only by the stand. • Do not hold the screen when moving the monitor. • Hold the lower corners or edges of the monitor when moving it.
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Check that the stand neck is firmly connected.
Removing the Stand ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the protective Styrofoam (cushion) included To disassemble the stand from the monitor, be Press the lower part of the monitor with one hand, Remove the stand neck from the stand base by...
Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz. ― When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded.
Connection Using the HDMI-DVI Cable Connecting to Headphones Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. HDMI IN 1, HDMI IN 2 ―...
Connecting the Power Connect the power plug to the AC/DC adapter. Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor. Plug the AC/DC adapter into the power outlet. Press the JOG button on the back of the monitor to turn it on. ―...
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
A higher value will make the picture appear brighter. A higher value will make the outline of objects clearer. ― This menu is not available when ― This option is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
HDMI Black Level Game Mode If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ Configure the product screen settings for game mode. color degradation, black level, etc.) may occur, depending on the connected source device. In such case, Use this feature when playing games on a PC or when a game console such as PlayStation™...
Picture Size Screen Adjustment ― This menu is only available when Change the picture size. Picture Size is set to Screen Fit Mode. When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, ―...
Chapter 05 Configuring the PIP/PBP Settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ ― PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10.
Size Sound Source Select the size and aspect ratio of the sub-screen. Set which screen you want to hear the sound for. • : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 2160 (width x height).
Source Picture Size Select the source for each screen. PIP Mode (available in PIP mode (Size PIP Mode (available in PIP mode(Size Select the image size for sub-screen. ― The input source for the main screen changes. mode ― With the exception of the current input source, the other two input sources can be selected. ―...
Contrast PBP Mode (available in PBP mode(Size Set the Picture Size for each of the divided screens. mode PIP Mode (available in PIP mode(Size • Auto: Display the picture according to the aspect ratio of the each screen input source. Adjust the contrast level for sub-screen.
Chapter 06 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Language from what is shown.
• The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center. ― When the resolution is changed while setting FreeSync Standard Engine...
Page 35
The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ―...
Configuring Off Timer the monitor panel. ― This option is not available when Timer: Turn on Off Timer mode. SAMSUNG Bright is in Dynamic Contrast mode. MAGIC ― This menu is not available when Game Mode is enabled.
PC/AV Mode Key Repeat Time PC/AV Mode to AV. The picture size will be enlarged. Control the response rate of a button when the button is pressed. This option is useful when you view a movie. Acceleration, sec, or 2 sec can be selected.
Information View the current input source, frequency and resolution. Information Picture LU********/** S/N:************** PIP/PBP OnScreen Display System HDMI1 **** x **** Information **kHz **Hz Exit Information Picture LU********/** S/N:************** PIP/PBP OnScreen Display System HDMI1 HDMI2 **** x **** **** x **** Information **kHz **Hz **kHz **Hz...
Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 10 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work properly if you do not restart the computer after the installation.
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 41
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings. •...
― The above specifications are subject to change without notice to improve quality. Maximum Pixel Clock 533.25 MHz (DisplayPort) ― This device is a Class B digital apparatus. 297.00 MHz (HDMI1) ― For detailed device specifications, visit the Samsung Electronics website. 594.00 MHz (HDMI2) Power Supply AC100-240V~ 50/60Hz (USA only) Based on the AC voltage of the adapter.
• Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...