Philips HTS9800W Firmware Upgrade Manual
Philips hts9800w: software guide
Hide thumbs
Also See for HTS9800W:
- Service manual (76 pages) ,
- User manual (55 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Quick Links
Firmware Upgrade
Introduction
The upgrade version of this software is Version 26 and can be used to upgrade Philips HTS9800W/12,
HTS9800W/37 and HTS9800W/55 to the latest status.
The upgrade allows the HTS9800W improves CDDA recognition, SCART detection and Bass/Treble.
Upgrade Procedure
Step 1
Check your current firmware version
1
Power up the set in DISC mode and make sure there is no disc inside the set, then press <DISPLAY>
button on the remote control.
2
The software version and other information are display on the TV screen as follows:
G69M1 VXX 9800-XX X XX
Servo : XXXXXXXX
HDCP XXXX (PASS or FAIL)
Example :
G69M1 V26 9800-12 2 08 -> Indicates Software version 26, stroke version 12, OTP version 8.
Servo : 94110000 Reg:2 -> Indicates Servo version 94110000 and Region code 2.
HDCP PASS -> Indicates HDCP pass.
Note:
Do NOT upgrade your set if the software version number is higher than V26!
The firmware information is also useful when you call Philips Customer Care Center.
Step 2
Download Firmware upgrade
1
Check you have the following tools:
•
PC (Pentium III 300MHz processor or higher)
•
CD-R/RW writer and writing application software
•
Blank CD-R or CD-RW disc
•
Internet access (broadband or high speed)
2
Click the link to download Firmware Upgrade to your PC
3
Unzip the .zip file
i) Do not rename the filename.
ii) Visit http://www.winzip.com/ for downloads if you cannot open the .zip file.
Reg:X
1
Advertisement
Table of Contents
Related Manuals for Philips HTS9800W
Summary of Contents for Philips HTS9800W
-
Page 1: Firmware Upgrade
Firmware Upgrade Introduction The upgrade version of this software is Version 26 and can be used to upgrade Philips HTS9800W/12, HTS9800W/37 and HTS9800W/55 to the latest status. The upgrade allows the HTS9800W improves CDDA recognition, SCART detection and Bass/Treble. Upgrade Procedure... - Page 2 Step 3 Burning Upgrade on CD-R / CD-RW Extract the files by unzipping the zipped file. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc, using the following settings: File System CD-ROM Joliet File name length : max 31 chars (ISO Level 2) Mode : 2/XA Character set : ASCII...
- Page 3 Select the unzipped file that you saved Click ‘Burn’ The Firmw are upgrade will now be burned onto the disc Using CD Creator Insert a blank CD-R or CD-RW disc Open CD Creator Select ‘Create Dat a CD’ Select ‘Record CD from C D image’...
- Page 4 If you have any problem, see Troubleshooting. Firmware upgrade history ersion 26 • The upgra de allows the HTS9800W to have improved CDDA recognition, SCART detection and Bass/Treble. the upgrade disc will automatically be ejected. Remove Disc . Software upgrading is completed...