Philips DVDR520H Software Upgrade Instructions

Version 196

Hide thumbs Also See for DVDR520H:

2. Key Features added in this software version

This software upgrade addresses following issues:

• VPS/PDC Timer recording problem

• Green lines appearing in PIP

• Notable sound difference between Nicam and Mono channels

• Time/Date format difference between System Menu and Guide Menu

• TV viewing channel is interrupted when Timer recording wakes up

• Unsynchronized audio/view is heard/seen during recording (Echo effect)

• In DV-in mode (no signal) recorder does not go to auto-Standby after the

specfied time setting

__________________________________________________________________

Tools Required

You will need the following items :

· a personal computer

· a CD-R/RW drive and writing application software

· a blank CD-R

__________________________________________________________________

Table of Contents

Page 1 1. Introduction The upgrade version of this software is Version 196 __________________________________________________________________ 2. Key Features added in this software version This software upgrade addresses following issues: • VPS/PDC Timer recording problem • Green lines appearing in PIP • Notable sound difference between Nicam and Mono channels •...
Page 2 It is important to write down the system version information of your DVD-player before you start the upgrade procedure. This information is also useful in case you need to call Philips Customer Care Center. 1. Select DVD source with the Remote Control 2.
Page 3 Finalize the disc. (The application may do this automatically.) NOTE : Packet writing application for drag & drop copying cannot be used for creating an upgrade disc. Use only a dedicated CD writing application allowing ‘disc at once’ recording. No UDF setting as well. 2.
Page 4 The following steps are applicable only when ERROR occurs. Do not power off; wait for the tray to eject and remove the Upgrade disc. Power off and on again with the Standby button and the set will FTD will display: Repeat steps 2 to 8.

Dvdr520h/37