Sony FE 16-35mm F4 ZA OSS (SEL1635Z) Manual and Review Video

Introduction

This instruction manual explains how to use lenses. Precautions common to all lenses such as notes on use are found in the separate "Precautions before using". Be sure to read both documents before using your lens.

This lens is designed for E-mount cameras. You cannot use it on A-mount cameras.

The Vario-Tessar T FE 16-35mm F4 ZA OSS was developed jointly by Carl Zeiss and Sony Corporation and designed for E-mount cameras manufactured by Sony. This lens is produced under the strict standards and quality assurance system of Carl Zeiss.
The Vario-Tessar T FE 16-35mm F4 ZA OSS is compatible with the range of a 35mm format image sensor.
A camera equipped with a 35mm format image sensor can be set to shoot at APS-C size.
For details on how to set your camera, refer to its instruction manual.

For further information on compatibility, visit the web site of Sony in your area, or consult your dealer of Sony or local authorized service facility of Sony.

Notes on Use

• When carrying a camera with the lens attached, always firmly hold both the camera and the lens.
• Do not hold by the part of the lens that protrudes when zooming.
• This lens is not water-proof, although designed with dust-proofness and splash-proofness in mind. If using in the rain etc., keep water drops away from the lens.

Precautions on using a flash

• When using a built-in flash or supplied flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture.
• Use a separately sold flash that has a flash coverage compatible with the focal length of the lens.

Vignetting

• When using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops.

Identifying the Parts

1. Lens hood index
2. Focusing ring
3. Zooming ring
4. Focal-length scale
5. Focal-length index
6. Lens contacts*
7. Mounting index

* Do not touch the lens contacts.

Attaching and Detaching the Lens

To attach the lens

1. Remove the rear and front lens caps and the camera body cap.
   

• You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2).
  

2. Align the white index on the lens barrel with the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks.
   
   

• Do not press the lens release button on the camera when mounting the lens.
• Do not mount the lens at an angle.

To remove the lens

While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens.

Attaching the Lens Hood

It is recommended that you use a lens hood to reduce flare and ensure maximum image quality.

Align the red line on the lens hood with the red dot on the lens (lens hood index), then insert the lens hood into the lens mount and rotate it clockwise until it clicks into place and the red dot on the lens hood is aligned with the red dot on the lens.

• When using an external flash attached to the camera, remove the lens hood to avoid blocking the flash light.
• When storing, fit the lens hood onto the lens backwards.

Zooming

Rotate the zooming ring to the desired focal length.

Focusing

There are three ways to focus.

• Auto focus
  The camera focuses automatically.
• DMF (Direct manual focus)
  After the camera focuses in auto focus, you can make a fine adjustment manually.
• Manual focus
  You focus manually.
  

For details on mode settings, refer to the instruction manual supplied with the camera.

Specifications

*¹ The values shown above for equivalent 35mm-format focal length are for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor.
*² Angle of view 1 is the value for 35mm cameras, and angle of view 2 is the value for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor.
*³ Minimum focus is the distance from the image sensor to the subject.

• Depending on the lens mechanism, the focal length may change with any change in shooting distance. The focal lengths given above assume the lens is focused at infinity.

Included items
Lens (1), Front lens cap (1), Rear lens cap (1), Lens hood (1), Lens case (1), Set of printed documentation

Design and specifications are subject to change without notice.

is a trademark of Sony Corporation.

Videos

Sony FE 16-35mm f/4 ZA OSS lens review with samples Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sony FE 16-35mm F4 ZA OSS (SEL1635Z) Manual and Review Video