Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
8
DO NOT overload this tidy; it should only be used for the designed purpose.
8
DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
8
Ensure that, when installed, it can be used without over-reaching or over-balancing.
9
2. INTRODUCTION
Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organize the storage of gloves, clothing, boots
and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack
capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.
3. SPECIFICATION
Model No: MS081FS
Depth: 460mm
Height: 1925mm
Width: 545mm
4. ASSEMBLY
4.1. Refer to diagram alongside.
5. CARE
5.1.
Clean with a soft, damp cloth.
DO NOT use abrasive or solvent cleaners.
8
© Jack Sealey Limited
FREESTANDING MOTORCYCLE HELMET &
GEAR TIDY
MS081FS
MODEL NO:
Step 3
Insert upper
upright
sections
into
lower uprights
Step 5
Adjust feet to ensure
good contact with
floor
Original Language Version
Step 4
Fit shelves into
uprights at desired
height
Step 1
Fit lower
section of uprights
into base unit
Step 2
Fit triangular braces
with fixings supplied.
MS081FS Issue 1
12/10/22
Advertisement
Related Manuals for Sealey MS081FS
Summary of Contents for Sealey MS081FS
- Page 1 MS081FS MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...