Please pull on the power plug instead. Do not attach, twist or tie the power cord. If the power cord is damaged, contact the Electrolux Table of contents Authorized Service for replacement in order to avoid any risks.
UV lamp (for PA31G only) Fixing screws and bushings (2 sets of 5 mm) Optional (not supplied with the product) Cover 1/2” adapter and 1/4” connector (available Control panel as accessories from the Electrolux Trigger Authorized Service) Water collecting grid (removable)
4. Installation The power cord plug of this domestic appliance complies with the new standard established by For your peace of mind, Electrolux has a highly NBR 14136 of the Brazilian Association of Tech- qualified authorized service network to install nical Standards (BATS), and by Ordinance No.
Page 6
Fixing the appliance on the wall • Improved connection between the plug and outlet, reducing the possibility of bad electri- (optional) cal contact; Fix the template on the wall at the desired • Decrease in energy losses. height, make sure that it is kept level, and drill Be careful not to rest the appliance on the power using the appropriate materials.
Page 7
Filter Installation IMPORTANT 1. Press the appliance cover to open it. (Figure Make sure that the water supply is closed in order to prevent leakage. 1. Connect the 3/4" adapter to the water supply Open the Press the cover tap (Figure 1). cover 2.
Page 8
UV Lamp Installation (for PA31G) 4. Snap the connector into the housing and at- tach the cable to the clip (Figure 10). IMPORTANT Make sure the appliance is unplugged. 1. Unplug the product from the power outlet and remove the lamp from the EPS housing. Figure 10 5.
5. How to Use ATTENTION The appliance produces a normal noise Control Panel while the cooling system is working and when the tanks are filled. Filter and UV Lamp Indicator The filter and UV lamp indicator will light up when one of these two components needs to be replaced.
Page 10
UV Lamp Replacement (for PA31G) After 10 minutes, empty the tank using the drainage port located at the back of the product and discard the water. IMPORTANT Unplug the appliance from the power out- let to replace the lamp. Be careful when replacing the lamp to avoid injury.
When the suggested corrections are not suf- simple one to solve or if there is no error in ficient, call the Electrolux Authorized Service, the use of the product, which can easily and which will be at your disposal.
8. Technical Specifications Model PA21G PA26G PA31G Width (mm) Height (mm) Depth (mm) Mass (Kg) Voltage (V) 127-220 127-220 127-220 Frequency (Hz) Maximum output (W) Water pressure (kPa) 39 to 392.26 kPa 39 to 392.26 kPa 39 to 392.26 kPa...
9. Guarantee Certificate The manufacturer Electrolux do Brasil S/A grants warranty against any applicable manufacturing defect under the following conditions: 1. The guarantee begins on the date of issue of the appropriate sales in- voice to the consumer corresponding to the product to be covered by the warranty with the model mandatory identification and of the product char- acteristics;...
Page 16
19. The costs arising and consequential to the installation of parts that do not belong to the product are the sole and exclusive responsibility of the Consumer. 20. Electrolux declares that there is no other natural and/or legal person empowered to make exceptions or commitments on its behalf regarding this guarantee certificate.
Page 17
A04577701/C G0009101/003 3004 8778 Capitals and Metropolitan Regions Dec/19 0800 728 8778 Other Regions Electrolux do Brasil S/A R. Ministro Gabriel Passos, 360 Phone: 41 3371-7000 CEP 81520-900 Curitiba - PR - Brasil CNPJ 76.487.032/0001-25 Made in China by Foshan Midea Chungho Water...