hit counter code
Philips 107T User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 107T
  6. User manual
Philips 107T User Manual

Philips 107T User Manual

Philips 107t electronic user's manual
Hide thumbs Also See for 107T:
Table of Contents

Advertisement

Quick Links

Philips 107T Electronic User's Manual
file:///C|/rita wu/gs3LF/ENGLISH/107T/Index.htm [10/12/2000 1:47:26 AM]

Advertisement

Table of Contents
loading

Related Manuals for Philips 107T

Summary of Contents for Philips 107T

  • Page 1 Philips 107T Electronic User's Manual file:///C|/rita wu/gs3LF/ENGLISH/107T/Index.htm [10/12/2000 1:47:26 AM]...

  • Page 2: Safety And Troubleshooting Information

    Read and follow these instructions when connecting and using your computer monitor: Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time.
  • Page 3 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips 107T Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.
  • Page 4 ©1999 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///C|/rita wu/gs3LF/ENGLISH/107T/about/about.htm (2 of 2) [10/12/2000 1:50:18 AM]...

  • Page 5: Product Information

    LightFrame™ for Windows Introduction Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT monitor. This highlighting is done by boosting the brightness and sharpness on a selected region of the monitor screen. Since high brightness and sharpness are not preferred for most standard Windows applications, this special feature will only be active in certain circumstances.

  • Page 6: Installation

    It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame™ logo on the front of the monitor.
  • Page 7 How to Deactivate LightFrame™ To deactivate, click on the LightFrame™ icon in the System Tray of the Taskbar. The light in the middle of the icon turns gray and LightFrame™ is deactivated. Note file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (3 of 8) [10/12/2000 1:50:19 AM]...
  • Page 8 If the monitor is detached from the computer while a highlighted window or area is displayed and then another monitor is attached, the system will have to be rebooted so that Philips ' LightFrame™ can detect the monitor 's LightFrame™ capabilities and store the setup information about the new monitor. If the monitor is not LightFrame™...

  • Page 9: White Color Temperature

    • Input signal levels • Sync input signal • Sync polarities WHITE COLOR TEMPERATURE file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (5 of 8) [10/12/2000 1:50:19 AM] RETURN TO TOP OF THE PAGE 17 inch / 41 cm ; 90° deflection angle 0.25 mm 0.21 mm...

  • Page 10: Energy Star

    This monitor is NERGY determined that this product meets the Physical Specifications file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (6 of 8) [10/12/2000 1:50:19 AM] x = 0.283 / y = 0.297 x = 0.313 / y = 0.329 RETURN TO TOP OF THE PAGE...

  • Page 11: Pin Assignment

    Green video ground Blue video ground file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (7 of 8) [10/12/2000 1:50:19 AM] 15.7" x 16.1" x 16.1" / 399 x 410 x 408 mm (including base) 15.7" x 14.7" x 16.1" / 399 x 373 x 408 mm (excluding base) 15.0 kg...

  • Page 12: Front View

    107T Product Information Views Follow the links to see various views of the monitor and its components. Front View Rear View file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (8 of 8) [10/12/2000 1:50:19 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 13: Installing Your Monitor

    Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor file:///C|/rita wu/gs3LF/ENGLISH/107T/install/install.htm (1 of 3) [10/12/2000 1:50:20 AM] • PCUH411 USB Hub (option)

  • Page 14: Rear View

    BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. Rear View file:///C|/rita wu/gs3LF/ENGLISH/107T/install/install.htm (2 of 3) [10/12/2000 1:50:20 AM] RETURN TO TOP OF THE PAGE...
  • Page 15 Power in - attach power cable here. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///C|/rita wu/gs3LF/ENGLISH/107T/install/install.htm (3 of 3) [10/12/2000 1:50:20 AM] RETURN TO TOP OF THE PAGE...

  • Page 16: On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
  • Page 17 Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/OSDDESC.HTM (2 of 4) [10/12/2000 1:50:22 AM] RETURN TO TOP OF THE PAGE...
  • Page 18 On-Screen Display file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/OSDDESC.HTM (3 of 4) [10/12/2000 1:50:22 AM]...
  • Page 19 On-Screen Display RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/OSDDESC.HTM (4 of 4) [10/12/2000 1:50:22 AM]...

  • Page 20: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
  • Page 21 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.

  • Page 22: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 23 TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards. See CrystalClear FAQ and USB Bay FAQ.

  • Page 24: Digital Control

    This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen.
  • Page 25 MPR-II defines maximum permitted electrostatic, magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor (see table). file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (5 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 26 The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second. Horizontal dot pitch See Dot pitch. Horizontal scanning frequency file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (6 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 27 50 Hz means a picture (or frame) frequency of 50 Hz. At any given resolution, non-interlaced modes are preferable to interlaced modes; however, generation of non-interlaced modes is more expensive. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (7 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...

  • Page 28: Line Frequency

    Currently, there are two areas of interest: very-low frequency (VLF) electric and magnetic fields extending from 2 kHz to 400 kHz, and extreme low frequency (ELF) fields extending from 5 Hz to 2 kHz. See also Electromagnetic radiation standards. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (8 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 29 This practice is occasionally necessary because some video cards generate a video pattern that is smaller than the visible file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (9 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 30 The number of pixels that can be written in a video line per second. Pixel rate See pixel frequency Plug-and-Play See DDC. See USB section. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (10 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 31: Refresh Rate

    The feature that allows users to adjust the whole screen rotating to be horizontal. Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces toward the different direction. Screen coatings file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (11 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 32 0.5%. ARAS also has a major advantage over other screen treatments: It doesn't diffuse or scatter reflected light, so picture contrast and sharpness remain completely unimpaired. It's also easy to clean and tough enough to withstand commercially available cleaning agents. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (12 of 18) [10/12/2000 1:50:24 AM]...

  • Page 33: Self-Test Function

    Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are most common: file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (13 of 18) [10/12/2000 1:50:24 AM]...

  • Page 34: Tilt Function

    2. Composite sync: Horizontal and vertical sync pulses mixed into a single signal train. 3. SOG: Horizontal and vertical sync pulses mixed, then combined with the green color signal. See Electromagnetic radiation standards. Tilt function file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (14 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 35 Each downstream port can be individually enabled and configured at either full or low speed. The hub isolates low speed ports from full speed file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (15 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 36 Upstream ports receive downstream data traffic. UPS (Universal Power Supply) The monitor with UPS feature can work in different countries with various mains voltage. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (16 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...
  • Page 37 Vertical dot pitch See Dot pitch. Vertical scanning frequency Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode. In non-interlaced mode vertical scanning frequency is the number of frames (complete pictrf 0ms written to thn also known as4 r frsh rate)h.
  • Page 38 For example, the VIS of a 17-inch monitor is only about 16 inches. It depends on the useful screen size of CRT and the opening of a monitor's front cabinet. file:///C|/rita wu/gs3LF/ENGLISH/107T/glossary/glossary.htm (18 of 18) [10/12/2000 1:50:24 AM] RETURN TO TOP OF THE PAGE...

  • Page 39: Download And Print

    Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 105B.pdf 105P.pdf 107B.pdf 107P.pdf 107S.pdf 107T.pdf 109B.pdf 109S.pdf file:///C|/rita wu/gs3LF/ENGLISH/download/download.htm [10/12/2000 1:50:24 AM] Mac. English language manual Adobe®...

  • Page 40: Troubleshooting

    No color or intermittent color Color appears blotchy Missing one or more colors file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/saf_troub.htm (1 of 2) [10/12/2000 1:50:44 AM] • Troubleshooting • Regulatory Information Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor.
  • Page 41 Problem with On Screen Display For further assistance, refer to the distributor. file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/saf_troub.htm (2 of 2) [10/12/2000 1:50:44 AM] Adjust the Brightness and Contrast controls. Check your video card and it's owner's manual instructions for it may be a non-VESA-DDC Standard card.

  • Page 42: Regulatory Information

    Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labeling involve? file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (1 of 11) [10/12/2000 1:50:46 AM] • TCO Environmental Requirements •...

  • Page 43: Environmental Requirements

    The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (2 of 11) [10/12/2000 1:50:46 AM] RETURN TO TOP OF THE PAGE...
  • Page 44 Time settings are adjusted from the system unit by software. From indicated inactivity to Power Saving Position A2, the total time must not be set to more than 70 minutes. NUTEK VESA State file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (3 of 11) [10/12/2000 1:50:46 AM] RETURN TO TOP OF THE PAGE PHILIPS 107T2*...

  • Page 45: Federal Communications Commission (Fcc) Notice (U.s. Only)

    To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (4 of 11) [10/12/2000 1:50:46 AM] Green Yellow Amber ®...

  • Page 46: Commission Federale De La Communication (Fcc Declaration)

    CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (5 of 11) [10/12/2000 1:50:46 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 47: Vcci Notice (Japan Only)

    Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (6 of 11) [10/12/2000 1:50:46 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 48: Polish Center For Testing And Certification Notice

    A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. North Europe Information file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (7 of 11) [10/12/2000 1:50:47 AM] RETURN TO TOP OF THE PAGE...
  • Page 49 NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. BCIQ Notice (Taiwan Only) file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (8 of 11) [10/12/2000 1:50:47 AM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 50: Warning! This Appliance Must Be Earthed

    Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
  • Page 51 Regulatory Information file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (10 of 11) [10/12/2000 1:50:47 AM] of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover.
  • Page 52 Regulatory Information the lead - not simply over the three wires. RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/regs/regulat.htm (11 of 11) [10/12/2000 1:50:47 AM]...

  • Page 53: Other Related Information

    Use a Cord Set rated minimum 5 A, 250 V ( for units set at 230V ) or 10A, 125V (for units set at 115V). The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed. file:///C|/rita wu/gs3LF/ENGLISH/107T/safety/saf_other.htm [10/12/2000 1:50:47 AM] • Troubleshooting •...
  • Page 54 • Microphone in/out • Includes • Dimension • Power consumption Description of the Controls file:///C|/rita wu/gs3LF/ENGLISH/107T/install/mm_pede/mm_inst.htm (1 of 4) [10/12/2000 1:50:58 AM] • Description of the Controls 2 x 1.5W RMS / 36W PMPO 3.5 mm jack 3.5 mm jack Audio cable and AC adapter 9.4"...
  • Page 55 6B3G11 Multimedia Base (option) Installing your Multimedia Pedestal file:///C|/rita wu/gs3LF/ENGLISH/107T/install/mm_pede/mm_inst.htm (2 of 4) [10/12/2000 1:50:58 AM] Attach your microphone here. Connect this to the audio output of your PC. Connect this to the microphone output of your PC. Connect power input here.

  • Page 56: Power Adapter Installation

    DC input Note: Please keep least 50 cm ) to avoid cansing unstable monitor picture. file:///C|/rita wu/gs3LF/ENGLISH/107T/install/mm_pede/mm_inst.htm (3 of 4) [10/12/2000 1:50:58 AM] 2. To UN-INSTALL Lift the back hook from the hole on the bottom plate of your monitor.
  • Page 57 6B3G11 Multimedia Base (option) RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3LF/ENGLISH/107T/install/mm_pede/mm_inst.htm (4 of 4) [10/12/2000 1:50:58 AM]...
  • Page 58 PCUH411 USB Hub (Option) Front View • Rear View • Installing your USB Hub Installing your USB Hub file:///C|/rita wu/gs3LF/ENGLISH/107T/install/usbhub/usb_inst.htm (1 of 2) [10/12/2000 1:50:59 AM] Installing on a conventional base. Take out the USB hub from the box. Take off the USB hub cover.
  • Page 59 USB Hub (Optional Feature) file:///C|/rita wu/gs3LF/ENGLISH/107T/install/usbhub/usb_inst.htm (2 of 2) [10/12/2000 1:50:59 AM] RETURN TO TOP OF THE PAGE hub to the back of the Multimedia Pedestal. Attach the USB hub by sliding-in to the Multimedia base.
  • Page 60 CONTRAST To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (1 of 25) [10/12/2000 1:51:11 AM] • The OSD Tree •...
  • Page 61 The MAIN CONTROLS window appears. LANGUAGE should be highlighted. 2) Press the button again. The LANGUAGE window appears. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (2 of 25) [10/12/2000 1:51:11 AM] RETURN TO TOP OF THE PAGE button and after three...
  • Page 62 . . . to continue to INPUT SIGNAL SELECTION, press the Smart SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL Help SELECTION..to exit completely, press the file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (3 of 25) [10/12/2000 1:51:11 AM] button until INPUT button...

  • Page 63: Input Signal Selection

    INPUT B or INPUT A. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (4 of 25) [10/12/2000 1:51:11 AM] RETURN TO TOP OF THE PAGE (Not available in all models)
  • Page 64 The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button. The ZOOM window appears. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (5 of 25) [10/12/2000 1:51:11 AM] button until ZOOM is highlighted. Next, follow button RETURN TO TOP OF THE PAGE...
  • Page 65 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST HORIZONTAL is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (6 of 25) [10/12/2000 1:51:11 AM] button RETURN TO TOP OF THE PAGE button until ADJUST...
  • Page 66 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (7 of 25) [10/12/2000 1:51:11 AM] button to return to MAIN CONTROLS window, or press the...
  • Page 67 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST VERTICAL is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (8 of 25) [10/12/2000 1:51:11 AM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button...
  • Page 68 4) Press the button to move the image up or down. 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (9 of 25) [10/12/2000 1:51:11 AM] button to return to MAIN CONTROLS window, or press the...
  • Page 69 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (10 of 25) [10/12/2000 1:51:11 AM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button...
  • Page 70 107E The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (11 of 25) [10/12/2000 1:51:11 AM]...
  • Page 71 BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the SIDE ANGLES is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (12 of 25) [10/12/2000 1:51:11 AM] button. button to highlight BALANCED or press the button.
  • Page 72 The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (13 of 25) [10/12/2000 1:51:11 AM] button twice.
  • Page 73 The SIDE ANGLES window appears. TRAPEZOID should be highlighted. 6) To adjust the trapezoid, press the 7) When the trapezoid is adjusted, press the button to return to the ADJUST SHAPE window. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (14 of 25) [10/12/2000 1:51:11 AM] button. button to highlight PARALLELOGRAM or press the...
  • Page 74 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (15 of 25) [10/12/2000 1:51:11 AM] button. button to return to the ADJUST SHAPE window. button twice.
  • Page 75 The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the arrow until ROTATE IMAGE is highlighted. 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (16 of 25) [10/12/2000 1:51:11 AM]...

  • Page 76: Adjust Color

    1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST COLOR is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (17 of 25) [10/12/2000 1:51:11 AM] button. button to return to the ADJUST SHAPE window. BACK TO button twice.
  • Page 77 9300K for GENERAL USE, 6500K for GAMES, or USER PRESET. 5) Once you have highlighted GENERAL USE or GAMES, press the and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (18 of 25) [10/12/2000 1:51:11 AM] button to confirm you selection...

  • Page 78: Reset To Factory Settings

    TO FACTORY SETTINGS..to exit completely, press the RESET TO FACTORY SETTINGS file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (19 of 25) [10/12/2000 1:51:11 AM] button to highlight RED. Next, press the LEFT button to highlight GREEN. Next, press the button to highlight BLUE. Next, press the button to confirm your adjustments and return to button.
  • Page 79 YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (20 of 25) [10/12/2000 1:51:11 AM]...
  • Page 80 2) Press the button until EXTRA CONTROLS is highlighted. 3) Press the button. The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (21 of 25) [10/12/2000 1:51:11 AM] button. RETURN TO TOP OF THE PAGE button until EXTRA...
  • Page 81 The MAIN CONTROLS window appears. 2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (22 of 25) [10/12/2000 1:51:11 AM] button. Your screen will be degaussed, then the MAIN button until EXTRA CONTROLS is...
  • Page 82 The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. 4) Press the button until ADJUST MOIRE is highlighted. 5) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted. file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (23 of 25) [10/12/2000 1:51:11 AM]...
  • Page 83 After returning to MAIN CONTROLS . . . Smart . . . to exit completely, press the Help file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (24 of 25) [10/12/2000 1:51:11 AM] button. button to highlight VERTICAL. button. button to return to the EXTRA CONTROLS window.
  • Page 84 107E The OSD Controls CLOSE MAIN CONTROLS RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3LF/ENGLISH/107T/OSD/osd_cont.htm (25 of 25) [10/12/2000 1:51:11 AM]...
  • Page 85 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

  • Page 86: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.

  • Page 87: Limited Warranty

    Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 88 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 89 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

This manual is also suitable for:

107e21107t21107e-21-94107e2174h107t2174107t2194 ... Show all

Table of Contents