(Original instructions) ENGLISH recommended in this instruction manual Intended use Your BLACK+DECKER BESTE625, BESTE628, BESTE630 may present a risk of personal injury. EASYFEED trimmers have been designed for trimming and Retain this manual for future finishing lawn edges and cutting grass in confined spaces.
ENGLISH (Original instructions) object, switch the appliance off and in the enclosed safety warnings. These risks can arise from misuse, prolonged remove the plug from the socket. use etc. Check for any damage to the Even with the application of the relevant appliance, replace or repair any safety regulations and the implementation damaged parts, check for and tighten...
(Original instructions) ENGLISH Additional safety instructions for using power tools in employment, an estimation of vibration exposure should grass trimmers consider, the actual conditions of use and Warning! Cutting elements continue to the way the tool is used, including taking rotate after the motor is switched off account of all parts of the operating cycle such as the times when the tool is...
ENGLISH (Original instructions) Be aware that freshly cut grass is Keep extension cords away from damp and slippery. cutting elements. Never cross gravel paths or roads Electrical safety while the machine is running. Do not to touch moving hazardous This machine is double insu- ...
Page 9
An extension cord retainer (3) is built into the switch handle 8. Edge guide wheel (BESTE628 and BESTE630 only) that prevents the cord from coming unplugged. Edge wire guide (BESTE625 only) To use this feature, simply double the extension cord ...
Page 10
ENGLISH (Original instructions) Note: You will experience faster than normal cutting line wear Operating the trimmer if the edging wheel is positioned too far from the edge with the With the unit on, angle slowly swing the trimmer side to ...
(Original instructions) ENGLISH Machine runs slowly Unfasten the end of the cutting line and guide the line into the eyelet (19) Fig. P. Check that the spool housing can rotate freely. Carefully Take the new spool and push it onto the boss ( 18 ) in the clean it if necessary.