Advertisement
Quick Links
1
DELL SE2222H
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out all of the
cable, power cable, CD&user's manual, stand base,
S2
stand riser and EEI label from the carton. (Note: It
depends on whether users returning the accessories)
label and QSG
cover
riser
Take out of the
paper top with base, riser and cover
S3
from the carton, then take out the monitor from the
EPE bag and put it on a protective cushion.
accessories including
QSG,
power cable
HDMI cable
user's manual
base
Use a Philips-head screwdriver to remove 6pcs
screws for unlocking mechanisms.
S4
(No.1~4 screw size=M4x11; Torque=11 1kgfxcm;
No.5~6 screw size=M4x6; Torque=11 1kgfxcm)
HDMI
Turn over the LCD monitor to let the screen faced
up, place a cloth on the panel where you are working
on to protect the panel. Continually, wedge your
S5
fingers between the front bezel and the panel in
order of arrow preference for unlocking
mechanisms. Turn over the LCD monitor to let the
screen faced down and then remove the rear cover.
2
Disconnect the function key cable away from the
S6
connector of the board, then tear off 3pcs adhesive
tape for releasing the function key board.
±
±
2
3
4
1
5
6
3
2
1
Advertisement
Related Manuals for Dell SE2222H
Summary of Contents for Dell SE2222H
- Page 1 DELL SE2222H 1. Disassembly Procedures: Use a Philips-head screwdriver to remove 6pcs screws for unlocking mechanisms. Open the Pizza carton with a proper tool. (No.1~4 screw size=M4x11; Torque=11 1kgfxcm; ± No.5~6 screw size=M4x6; Torque=11 1kgfxcm) ± Take out all of the...
- Page 2 DELL SE2222H ift up the bracket chassis and put it on a protective cushion Tear off 2pcs acetate tapes and tape on the back of the panel lamp cable for unlocking panel lamp cable, and then disconnect the panel lamp cable away from Release the panel module away from the hooks of the connector of panel module.
- Page 3 DELL SE2222H Remove the Mylar from the hooks of the bracket chassis module. Use a Philips-head screwdriver to remove 4pcs screws for unlocking the circuit board, release all the cables from the hooks. (No.1 screw size=M4x8, Torque=6±0.5kgfxcm; No. 2~4 screw size=M3x7.5, Torque=6±0.5kgfxcm)
- Page 4 DELL SE2222H S16-4 Take out bulk cap. pin solder with soldering iron and Remove electrolyte capacitors (red mark) from absorber. printed circuit boards. S16-1 Cut the glue between bulk cap. and PCB with a knife. S16-5 Lift the bulk cap. up and away from the PCB.
- Page 5 DELL SE2222H 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...