Table of Contents
Advertisement
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.
PROBLEM
The air conditioner does
not work at all.
The temperature
adjustment is not working.
Cool/Warm air does
not come out of the air
conditioner.
Air flow adjustment is not
working.
Fan speed adjustment is
not working.
Remote controller is not
working.
Timer function does not
set.
The indicator is blinking
continuously.
Odors permeate in the
room during operation.
20
Maldive EUR_AQV09P@_IBIM_32436A_E.indd 20
SOLUTION
Power button.
auto and you cannot adjust the temperature.
the current temperature. Press the Temp + or - button on the remote controller to change
the set temperature.
cooling(heating) performance may decrease. Clean them frequently.
take the obstacle away.
curtains or etc.
or the outdoor temperature is too low, the air conditioner operates in De-ice mode
automatically. In De-ice mode, indoor fan stops and cool air does not come out.
Close the doors and windows.
operation. In this case, just a fan will run to protect the outdoor unit compressor.
pipe length, cooling (heating) performance may decrease.
temperature is set to auto and you cannot adjust the temperature.
Check if you have selected Auto/Dry/Turbo/
is set to Auto and you cannot adjust the fan speed.
comes from fluorescent bulbs or neon signs may interrupt the electric waves.
Set button on the remote controller after you have set the time.
Power
button or disconnect the power plug/switch off the auxiliary power
switch.
If the indicator is still blinking, contact the service center.
conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air
conditioner.)
mode. In these modes, desired
mode. In these mode, fan speed
2010-11-11 15:02:06
Hide quick links:
Advertisement
Table of Contents
